Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer
take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. -- Stoutman www.garagewoodworks.com |
#2
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
"Stoutman" .@. wrote in message m... My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. -- Stoutman www.garagewoodworks.com I have a right angle Makita that I got in 1983 and the battery still works for a little while. I have had a Panasonic, 2 different DeWalt's and Now use a Makita. The Panasonic was the Cadillac but liked the DeWalt and like the Makita. You might watch for the "buy a drill and get an impact driver for free deal", or visa versa. I bought my 12v Makita Impact 2 years ago for about $200 and sent for the free drill. If you have one of the impact drivers you really don't need over 9.6 or 12 volt. The impact drivers are usually 5 to 6 times stronger than their "sister same voltage" drills. The new Lithium Ion batteries look promising but are more pricey. |
#3
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
We have a Bosch 14.4 we use a minmum of 5 days a week in both our
businesses. It is about 4 years old now. I would buy one again. I think we paid around $150.00. cm www.vintagetrailersforsale.com "Stoutman" .@. wrote in message m... My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. -- Stoutman www.garagewoodworks.com |
#4
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
Stoutman wrote: My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. -- Stoutman www.garagewoodworks.com Batteries don't just have a certain number of cycles, time kills them too. I've never had a battery last for more than about 6 years or so before the run time got too low to be useful. So resist the urge to buy the biggest, baddest, drill with the best specs and all that. Unlike your corded drill, your cordless tools are somewhat "disposable". The price of two batteries will almost buy you a whole new kit; so when the batteries die, most people start over. Go down to the local Borg and hold several in you hands. Pick the one that feels best if it comes from Panasonic, Bosch, Dewalt, Hitachi, Makita, Milwaukee, or Ridgid, (did I leave anybody out?) but NOT Craftsman or Ryobi. The only caveat to that is Ridgid. I dont' own any Ridgid power tools, but I'd give very serious consideration to Ridgid cordless because they warranty the BATTERIES TOO for life. Be sure to save all the receips, UPC codes etc. required to use the warranty, because the batteries WILL die someday. I'm on cordless drill number five, and I own three that still work at least a while. My favorite is a 12 volt Milwaukee T-handle with the battery that hangs out front, under the trigger. It's the best balanced and most comfortable drill I've ever used. DonkeyHody "All that is required for evil to prevail is for good men to do nothing." - Edmund Burke |
#5
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
I second the previous posters idea of Ridgid. I recently picked up a 5
tool 18V combo kit for $269 (Ill explain later). I *had* a 14.4V Milwaukee hammer drill that I loved......used it for absolutely everything I could. But the batteries were terrible. Even new, they would work a while then just no longer have any good runtime. I went so far as purchasing the triple-bay charger (apparently the single-bay charger wasnt "smart" and the batteries would end up undercharged or fried from the charger). The triple-bay helped the issue a little, but I still get somewhat short runtimes. The Ridgid set is perfect, because of the lifetime service agreement. It might not be the easiest way to get stuff fixed/replaced (either send it to a service center, or drive it to one nearest you), but there is a standard 3 year warranty on everything before the lifetime even kicks in......in those 3 years, bring back to HD, walk out with a replacement. Ive used every piece of it except the recip saw. The drill is suprisingly heavy duty.......I was figuring I would be let down coming from the "Big Red", but Im pretty impressed with the Ridgid so far. A couple things bother me (harder to use the directional switch than the Milwaukee, and the cluthc is a little noisy when in high speed), but definitely worth the $$$. If you can find them, there are 2 combo kits on "clearance". One (model R9212) is 209.00, the other (model R9222) is 269.00. The more xpensive one comes with the recip saw, the cheaper one does not. They are covered under the lifetime warranty ocne you register them. The drill alone costs more than that. Ridgid also now has the 24V LithIon tools, if you wanted to go that route. Good luck! -Chris Stoutman wrote: My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. -- Stoutman www.garagewoodworks.com |
#6
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
You might want to reconsider the $200 limit. I just purchased one of the new
V18 LI-ion batteries and chargers from Milwaukee. I know that it is a fair bit lighter than than my old 18v NiCd and it runs near full power until dead. (The chart shows a near right angle for power vs. runtime which is pretty accurate) I am very impressed with it. Also it has a 5 year/ 2000 charge warranty. The hammer drill kit is around $300 and the 4pc. combo kit with circ saw, sawzall, drill, flashlight, and 2 batteries is around $500. If you really want something powerful look at the V28 from Milwaukee. I wanted that but that would mean a sizable investment in new tools. The V18 works with all of their 18v cordless. Allen "Stoutman" .@. wrote in message m... My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. -- Stoutman www.garagewoodworks.com |
#7
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
Bosch 14.4 gets my vote
-- Rick Nagy Johnstown, PA - Remove nospam to email me Be sure to check out my website at http://www.rickscabinetshop.com "Stoutman" .@. wrote in message m... My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. -- Stoutman www.garagewoodworks.com |
#8
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
"Stoutman" .@. wrote in
m: My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. My 12v DeWalts have been going for more than 5 years of highly irregular work habits. I'm a serious hobby guy, in spurts, and may do one major kitchen or bathroom a year, plus a couple of pieces of furniture, plus the usual smaller stuff. The batteries don't get a heavy usage, except for a couple of weeks, when they get hammered pretty good. I'd buy DeWalt again in a heartbeat. Patriarch |
#9
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
"Stoutman" .@. wrote in message m... My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. Since you had a 9.6V, you don't need the big honking 24V models that are too heavy for many chores. My vote is Panasonic 15.6V. I set out to buy a Bosch, but I picked up the Panasonic and it just felt right. Plenty of power, good weight and balance, one hand chuck. It is also 15 ounces lighter than the 18V Bosch I considered and has longer lasting batteries, 3.5 AH. http://www.coastaltool.com/cgi-bin/S...7+1162734 027 |
#10
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
Stoutman wrote: My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. -- Stoutman www.garagewoodworks.com I picked up a dewalt 14.4 drill this summer (sale at lowes - $80) - just a regular drill w/ 2 batteries . works great! shelly |
#11
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
On 4 Nov 2006 15:50:32 -0800, "DonkeyHody"
wrote: The only caveat to that is Ridgid. I dont' own any Ridgid power tools, but I'd give very serious consideration to Ridgid cordless because they warranty the BATTERIES TOO for life. Be sure to save all the receips, UPC codes etc. required to use the warranty, because the batteries WILL die someday. Everything on the Rigid is guaranteed for life. The batteries, the brushes, the chuck, everything. I don't think there's another company out there that stands behind their products like that, especially at that price. |
#12
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
Brian Henderson wrote in
: On 4 Nov 2006 15:50:32 -0800, "DonkeyHody" wrote: The only caveat to that is Ridgid. I dont' own any Ridgid power tools, but I'd give very serious consideration to Ridgid cordless because they warranty the BATTERIES TOO for life. Be sure to save all the receips, UPC codes etc. required to use the warranty, because the batteries WILL die someday. Everything on the Rigid is guaranteed for life. The batteries, the brushes, the chuck, everything. I don't think there's another company out there that stands behind their products like that, especially at that price. Batteries guaranteed for life? Looks like I'm going to the Big Orange Retail Giant soon. I've been eyeballing Makita, but if Ridgid will replace the batteries when they die, I'm buying. Best get two, a 9.6V for light jobs and a 24V for big ones... So little money, so many hobbies... Puckdropper -- Wise is the man who attempts to answer his question before asking it. To email me directly, send a message to puckdropper (at) fastmail.fm |
#13
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
"Puckdropper" wrote in message reenews.net... Batteries guaranteed for life? Looks like I'm going to the Big Orange Retail Giant soon. I've been eyeballing Makita, but if Ridgid will replace the batteries when they die, I'm buying. Best get two, a 9.6V for light jobs and a 24V for big ones... So little money, so many hobbies... You can get an 9.6 impact driver that will likely out perform the 24 volt drill and also consider that while the Ridgid had an excellent warranty, the tool may not feel quite right to you. I looked at the Ridgid a couple of years ago and they were very heavy by comparison. They may be lighter these days. |
#14
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
Leon,
That is what I like about my Bosch. It feels better in my hand than my Dewalts, and Makitas. cm "Leon" wrote in message m... "Puckdropper" wrote in message reenews.net... Batteries guaranteed for life? Looks like I'm going to the Big Orange Retail Giant soon. I've been eyeballing Makita, but if Ridgid will replace the batteries when they die, I'm buying. Best get two, a 9.6V for light jobs and a 24V for big ones... So little money, so many hobbies... You can get an 9.6 impact driver that will likely out perform the 24 volt drill and also consider that while the Ridgid had an excellent warranty, the tool may not feel quite right to you. I looked at the Ridgid a couple of years ago and they were very heavy by comparison. They may be lighter these days. |
#15
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
In article ,
Brian Henderson wrote: On 4 Nov 2006 15:50:32 -0800, "DonkeyHody" wrote: The only caveat to that is Ridgid. I dont' own any Ridgid power tools, but I'd give very serious consideration to Ridgid cordless because they warranty the BATTERIES TOO for life. Be sure to save all the receips, UPC codes etc. required to use the warranty, because the batteries WILL die someday. Everything on the Rigid is guaranteed for life. The batteries, the brushes, the chuck, everything. I don't think there's another company out there that stands behind their products like that, especially at that price. That's not one of thse fine-print "LIFETIME WARRANTY: guaranteed for the life of the tool" warranties, is it? -- Often wrong, never in doubt. Larry Wasserman - Baltimore, Maryland - |
#16
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
wrote in message ... That's not one of thse fine-print "LIFETIME WARRANTY: guaranteed for the life of the tool" warranties, is it? Yes it is and the life time guarantee states that the batteries, charger, bearings, brushes, hypoid gear oil, etc. are all covered for life. |
#17
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
I'm in the same boat. My 13.2 B&D Firestorm died and I'm getting close to
buying a DeWalt 14.4 XRP. Any reason I shouldn't? "Stoutman" .@. wrote in message m... My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. -- Stoutman www.garagewoodworks.com |
#18
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
On Sat, 04 Nov 2006 22:47:06 GMT, "Stoutman" .@. wrote:
My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. My DeWalt 18v came with two batteries. I've been using it heavily (5-45 hours a week, averaging at least 10-15 per week) for over eight years. I had to buy a new battery last year, but the old ones will still each hold a charge for an hour or so- just long enough to completely recharge the new one. The new one (18v XRP) will run for about 10 hours on a charge driving screws- a little less for things like drilling tile or concrete, but that may be due to the fact that it is not a hammer drill. It also drains faster doing things like mixing 5-gal buckets of paint or drywall with a mixing wand- but I don't do that too often (that's a job for an old corded drill.) AFAIK, the 14v is comparable. $200 will get you a nice drill, to be sure. The 12v and 9.6v are also fairly popular for chamfering and deburring holes in metal shops. There might be better ones, but you won't go wrong with the one you're looking at. |
#19
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
You will be pleased when you switch to the xrp batteries. Big differendce
ove the old batteries. cm "Prometheus" wrote in message ... On Sat, 04 Nov 2006 22:47:06 GMT, "Stoutman" .@. wrote: My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. My DeWalt 18v came with two batteries. I've been using it heavily (5-45 hours a week, averaging at least 10-15 per week) for over eight years. I had to buy a new battery last year, but the old ones will still each hold a charge for an hour or so- just long enough to completely recharge the new one. The new one (18v XRP) will run for about 10 hours on a charge driving screws- a little less for things like drilling tile or concrete, but that may be due to the fact that it is not a hammer drill. It also drains faster doing things like mixing 5-gal buckets of paint or drywall with a mixing wand- but I don't do that too often (that's a job for an old corded drill.) AFAIK, the 14v is comparable. $200 will get you a nice drill, to be sure. The 12v and 9.6v are also fairly popular for chamfering and deburring holes in metal shops. There might be better ones, but you won't go wrong with the one you're looking at. |
#20
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
On Sun, 05 Nov 2006 16:00:05 GMT, "cm"
wrote: Leon, That is what I like about my Bosch. It feels better in my hand than my Dewalts, and Makitas. cm There's a lot to that- I like DeWalt, because I've got big hands, and they've got big grips. I've seen other guys cringe when picking my drill up (It is a fairly heavy beast)- and I feel like I might break theirs. |
#21
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
I've have Dewalt 18 and 12 volt units and am happy with both of them. I can't imagine needing more power than the 18 volt unit. The other day I put in a fresh battery and the thing almost sprained my wrist. I like to buy American products when I can, even if they are made in Mexico... -Scott |
#22
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
On Sun, 05 Nov 2006 14:07:00 GMT, "Leon"
wrote: You can get an 9.6 impact driver that will likely out perform the 24 volt drill and also consider that while the Ridgid had an excellent warranty, the tool may not feel quite right to you. I looked at the Ridgid a couple of years ago and they were very heavy by comparison. They may be lighter these days. While I don't have a lot of Ridgid tools, the ones I've used haven't felt any different than the tools I do own and when I need to replace in the future, I'm going to give Ridgid a serious look. |
#23
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
"Stoutman" .@. wrote in
m: My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. This is a systemic problem with all cordless tools. The general idea is that the batteries go and when that does the user generally tosses the whole thing and buys another. As a result the manufacturers love selling them them because they know the end user will be buying another one in a few years. Sales stay high, the end user gets fleeced in the long run and life is great depending on your perspective. |
#24
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
Stoutman wrote:
My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. I have a Porter Cable 12V cordless that I bought in 1999. Still working. Both batteries still take a charge. Since there is no hour meter on it, can't say how many charges it's had. -- Frank Howell ----------------- www.Newsgroup-Binaries.com - *Completion*Retention*Speed* Access your favorite newsgroups from home or on the road ----------------- |
#25
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
R. Pierce Butler wrote:
This is a systemic problem with all cordless tools. The general idea is that the batteries go and when that does the user generally tosses the whole thing and buys another. As a result the manufacturers love selling them them because they know the end user will be buying another one in a few years. Looked at Ridgid cordless? As mentioned in another post, if you register the tool (which is free) you get a lifetime warrenty, including batteries, brushes, etc. Chris |
#26
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
"R. Pierce Butler" wrote in message . 1... This is a systemic problem with all cordless tools. The general idea is that the batteries go and when that does the user generally tosses the whole thing and buys another. As a result the manufacturers love selling them them because they know the end user will be buying another one in a few years. Sales stay high, the end user gets fleeced in the long run and life is great depending on your perspective. I bet the manufacturer would rather see you buy two new batteries for your drill vs. paying $25-$40 more for a drill case, charger, drill, and two batteries. If you buy all new, the manufacturer stands the chance of loosing you to another brand. I have gone from Makita, to Panasonic, to DeWalt, and back to Makita, because I bought the whole nine yards each time. Had I only bought two new batteries I would still be with the previous brand and gotten much less for my money and I strongly suspect the manufacturers GP would have been higher. |
#27
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
On Mon, 06 Nov 2006 19:41:20 GMT, "Leon"
wrote: I bet the manufacturer would rather see you buy two new batteries for your drill vs. paying $25-$40 more for a drill case, charger, drill, and two batteries. If you buy all new, the manufacturer stands the chance of loosing you to another brand. I have gone from Makita, to Panasonic, to DeWalt, and back to Makita, because I bought the whole nine yards each time. Had I only bought two new batteries I would still be with the previous brand and gotten much less for my money and I strongly suspect the manufacturers GP would have been higher. I bought a Panasonic set a couple years ago that came with two batteries and there was a special mail-in offer for a third battery free. All three batteries still take a full charge with no problem. It'll probably be a couple more years before I have to start thinking about replacing anything, but by then, I figure the battery technology will be so far ahead that it'll be worth it to just replace the whole set with something more advanced. |
#28
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
I have a Bosch 14.4 that I bought at a tool store here. It's a rental place
that always tells me "throw away the registration card". (you could also stop in for a beer at this place at around 5:00 or so) After about a 10 months the clutch started slipping, even when put on the drill setting. I took it in and voila, brand new drill. No paperwork, no hassle. Try doing that at a Borg store. I like to get stuff from a place that stands behind a warranty. I've had the replacement now for over 2 years with no problems. -- Rick Nagy Johnstown, PA - Remove nospam to email me Be sure to check out my website at http://www.rickscabinetshop.com "Frank Howell" wrote in message ... Stoutman wrote: My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. I have a Porter Cable 12V cordless that I bought in 1999. Still working. Both batteries still take a charge. Since there is no hour meter on it, can't say how many charges it's had. -- Frank Howell ----------------- www.Newsgroup-Binaries.com - *Completion*Retention*Speed* Access your favorite newsgroups from home or on the road ----------------- |
#29
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
On Sat, 04 Nov 2006 22:47:06 GMT, "Stoutman" .@. wrote:
My Crapsman cordless drill (9.6V) bit the dust. The battery would no longer take a charge. I was at the BORG and was eyeballing the Dewalt 14V (DC728KA). Do you own one? Can you recommend another comparable one. I don't want to spend more than $200 Americano. How much life do you usually get from a cordless drill battery? I assume it depends on the number of depletions/recharges. Lots of good advise and recommendations. I have a Milwaukee 14.4 that I got two years ago. I hung on to my corded drill with a death grip, but when it finally went to tool heaven, the Milwaukee was my choice. It came with two battery packs and had a rebate offer at the time where I could get my choice of another battery or some other stuff like a pocket knife. I now have 3 battery packs. In my case, the smart charger it came with recharges the discharged battery in one hour completely full. No undercharge, no over charge. Mine is hobbyist use. Meaning, this drill is going to look new when those batteries finally give up, as they inevitably will. |
#30
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
On Mon, 06 Nov 2006 19:41:20 GMT, "Leon"
wrote: I bet the manufacturer would rather see you buy two new batteries for your drill vs. paying $25-$40 more for a drill case, charger, drill, and two batteries. If you buy all new, the manufacturer stands the chance of loosing you to another brand. I have gone from Makita, to Panasonic, to DeWalt, and back to Makita, because I bought the whole nine yards each time. Had I only bought two new batteries I would still be with the previous brand and gotten much less for my money and I strongly suspect the manufacturers GP would have been higher. I'd say that's a strong bet- look at all the sets of cordless tools that come with more tools than batteries. Sure, you can swap them around- that's the obvious and most sensible thing to do, but when those wear out, you have to decide between buying a new battery or two, or tossing 4-5 tools instead of just one. I have to admit, it works on me- I'd buy a new battery before I'd get a new tool if the old one still worked, because everything I've got (cordless-wise, anyhow) is 18v DeWalt. Buying a different brand would require carrying another charger, and another outlet to plug into. When you break the cost per battery up amongst several tools, it's much lower, comparatively. |
#31
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
"Prometheus" wrote in message ... I'd say that's a strong bet- look at all the sets of cordless tools that come with more tools than batteries. Sure, you can swap them around- that's the obvious and most sensible thing to do, but when those wear out, you have to decide between buying a new battery or two, or tossing 4-5 tools instead of just one. I have to admit, it works on me- I'd buy a new battery before I'd get a new tool if the old one still worked, because everything I've got (cordless-wise, anyhow) is 18v DeWalt. Buying a different brand would require carrying another charger, and another outlet to plug into. When you break the cost per battery up amongst several tools, it's much lower, comparatively. It also seems to me that the price of the large kits goes up unproportionally. Typically a Drill kit includes 2 batteries and a charger and case. The drill, charger, case and batteries can be had for a few dollars more than just two batteries. When you get the kit with a jigsaw, circle saw, recip saw, drill, and flash light, the price of the extra tools seem to steeper. The drill alone may cost $25-$40 extra, the cost of the extra jig saw, circle saw, recip saw, and flash light seem to cost $75-$100 each extra. I would be willing to bet again that the GP on the large kit is much higher than the drill kit alone. |
#32
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
On Tue, 07 Nov 2006 12:54:32 GMT, "Leon"
wrote: "Prometheus" wrote in message .. . I'd say that's a strong bet- look at all the sets of cordless tools that come with more tools than batteries. Sure, you can swap them around- that's the obvious and most sensible thing to do, but when those wear out, you have to decide between buying a new battery or two, or tossing 4-5 tools instead of just one. I have to admit, it works on me- I'd buy a new battery before I'd get a new tool if the old one still worked, because everything I've got (cordless-wise, anyhow) is 18v DeWalt. Buying a different brand would require carrying another charger, and another outlet to plug into. When you break the cost per battery up amongst several tools, it's much lower, comparatively. It also seems to me that the price of the large kits goes up unproportionally. Typically a Drill kit includes 2 batteries and a charger and case. The drill, charger, case and batteries can be had for a few dollars more than just two batteries. When you get the kit with a jigsaw, circle saw, recip saw, drill, and flash light, the price of the extra tools seem to steeper. The drill alone may cost $25-$40 extra, the cost of the extra jig saw, circle saw, recip saw, and flash light seem to cost $75-$100 each extra. I would be willing to bet again that the GP on the large kit is much higher than the drill kit alone. That could be the case, but it's still often signifigantly cheaper than buying each of the tools individually. Usually, I don't go for the kits, but that's more because they've always got one or two things I don't want or need in them. If I were replacing everything, they'd be an attractive option. |
#33
Posted to rec.woodworking
|
|||
|
|||
My cordless drill bit the dust.
"Prometheus" wrote in message ... On Tue, 07 Nov 2006 12:54:32 GMT, "Leon" wrote: "Prometheus" wrote in message . .. I'd say that's a strong bet- look at all the sets of cordless tools that come with more tools than batteries. Sure, you can swap them around- that's the obvious and most sensible thing to do, but when those wear out, you have to decide between buying a new battery or two, or tossing 4-5 tools instead of just one. I have to admit, it works on me- I'd buy a new battery before I'd get a new tool if the old one still worked, because everything I've got (cordless-wise, anyhow) is 18v DeWalt. Buying a different brand would require carrying another charger, and another outlet to plug into. When you break the cost per battery up amongst several tools, it's much lower, comparatively. It also seems to me that the price of the large kits goes up unproportionally. Typically a Drill kit includes 2 batteries and a charger and case. The drill, charger, case and batteries can be had for a few dollars more than just two batteries. When you get the kit with a jigsaw, circle saw, recip saw, drill, and flash light, the price of the extra tools seem to steeper. The drill alone may cost $25-$40 extra, the cost of the extra jig saw, circle saw, recip saw, and flash light seem to cost $75-$100 each extra. I would be willing to bet again that the GP on the large kit is much higher than the drill kit alone. That could be the case, but it's still often signifigantly cheaper than buying each of the tools individually. Usually, I don't go for the kits, but that's more because they've always got one or two things I don't want or need in them. If I were replacing everything, they'd be an attractive option. I've been sorely tempted by the Dewalt 36v LiIon kit-- |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Which has the better cordless 18v. drill: Bosch or Hitachi? | Woodworking | |||
Warranty on Makita cordless drill / Starter drill kits | UK diy | |||
3 month report on Rigid Cordless Drill and Miter Saw | Metalworking | |||
Makita Cordless Drill Question | Woodworking | |||
Electric sparks generated by my new cordless drill | Woodworking |