"David F. Eisan" wrote in message
...
Evening all,

I had a major trade show to look after last weekend, so not much has
happening on my parents kitchen.

I did manage to get in a little work on some drawers though. There
are only
8 drawers in the kitchen. They are made from 5/8" thick solid hard
maple.
The drawer sides are glued up from leftovers and boards with
discolouration
that I didn't think made the cut for doors or drawer fronts. The
drawer
bottoms are 1/2" hard maple flat saw veneer plywood.

I just finished the four drawer this evening and thought I would
post some
photos.

First, the stack of boards fresh from being glued up, planed, drum
sanded
and ROS sanded.

http://www.federatedtool.com/david/img/drawer1.jpg

Second, The boards all cut to size.

http://www.federatedtool.com/david/img/drawer2.jpg

Third, cutting a tail board.

http://www.federatedtool.com/david/img/drawer3.jpg

Fourth, laying out the pin board.

http://www.federatedtool.com/david/img/drawer4.jpg

Fifth, cutting the pin board.

http://www.federatedtool.com/david/img/drawer5.jpg

Sixth, after gluing up the drawer, trimming the pins and tails
flush.

http://www.federatedtool.com/david/img/drawer6.jpg

Seventh, the four finished drawers.

http://www.federatedtool.com/david/img/drawer7.jpg

The drawers are not perfect, but I am very happy with how they have
turned
out.

Four more to go...

David.

Every neighbourhood has one, in mine, I'm him.

Very nice work. I actually like the discoloration.