Like the Frank Klausz video on making a handcut drawer, Richard Raffan's
vid on making a "turned box" covers a lot of ground and there are a lot
of subtle things which are easily overlooked. Do something out of order
and you may have to start all over again. Miss one of the less than
obvious things which must be done in the correct order and you can
split a part while chucking it up, blow through the wall of a part
you're
hollowing, blow the fit of the lid, etc., etc., etc. . Pitfalls are
present
throughout what seems to be a fairly simple process - and I'm prone
to falling into ALL the pitfalls I encounter.

SO - I'm working on a set of instructions for myself along the lines of
my
earlier instructions for making a hand cut dovetail drawer based mainly
on the Frank Klausz video. Since I'm a "visual learner" there's plenty
of
illustrations and "NOTE!" text cautions when something critical might
be overlooked in an illustrative diagram. That stuff's here if you're
interested.

http://home.comcast.net/~charliebcz/...ilDrawer0.html

ANYWAY - I'm posting five pages of my draft instructions for your
review and comment, page 5 being under construction. As always,
comments, suggestions and constructive criticism will be appreciated.
With a few more sets of eyes going over them, holes or flat out errors
are more likely to be spotted - and hopefully corrected.

Not knowing enough to know if I shouldn't, I'm hollowing with a curved
skew and it seems to be pretty quick and easy - and so far no nasty
catches or spiral cuts like I've gotten with an Ellsworth Grind bowl
gouge. I've included illustrations of what I'm doing that hopefully
convey the method adequately.

What I'm shooting for is some web pages that can be downloaded -
for FREE -
printed, taken to the shop, followed and have the first experience
for a newbie to be an enjoyable and successful one. First attempt
failures often become the last attempt at something new. But
a success on the first try usually is the beginning of many more
of whatever you want to do, with refinements and variations
leading to some really nice stuff as experience is gained.

"Instructions" posted in alt.binaries.pictures.woodworking.

charlie b

"charlie b" wrote in message
...
Like the Frank Klausz video on making a handcut drawer, Richard Raffan's
vid on making a "turned box" covers a lot of ground and there are a lot
of subtle things which are easily overlooked. Do something out of order

snip

http://home.comcast.net/~charliebcz/...ilDrawer0.html

snip

charlie b

The link to the PDF version of your dovetail instructions doesn't seem to be
working.

Tin Woodsmn

TinWoodsmn wrote:

The link to the PDF version of your dovetail instructions doesn't seem to be
working.

Sorry. Have run up against a Comcast site size limit. To add any
new
stuff I have to kill off some older stuff. PDF files, while quite
handy
for multi page stuff, take up a LOT of space. And since the
instructions
went through many revisions, making the revsions to a page and then
having to redo and upload the revised PDF file just got to be a
hassle.
Will remove the link to the PDF version the next time I update my
site.

But you can still download each page, they're all GIF files, and
print
them at your leisure or put them in a PDF file if that's a more
convenient to use format.

charlie b