Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Stanely 90201M Router and Base
I came across an old Stanley router and base. The cord is in bad shape so I
haven't fired it up to see it the motor works. Right now, the base won't turn. It will rotate about 10-15 degrees and then jam. In one direction, it hits a hard stop, the other just gets real tight. I've removed the lock but still no go. I've Googled it and came up with nothing on this model number. I know Stanley sold off to Bosch and the Bosch site has nothing either. The handles are mounted on the motor and not the base. I can post pics to ABPW if it's "safe" to back in there. Anybody know anything about this or where I can find some reference material? TIA |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Centering router on table base | Woodworking | |||
Porter Cable 891 router | Woodworking | |||
An Ultimate Router Table - Part I: A Short Story | Woodworking | |||
Review of the new Porter Cable 895PK- Part 1 | Woodworking | |||
Porter Cable 690 router mounted to TS extension, do I use plunge base or standard | Woodworking |