Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
|
#2
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
Good ones!
On 650, are the bulbous centers of the round pieces rotary joints? "R.H." wrote in message ... The latest set has just been posted: http://puzzlephotos.blogspot.com/ Rob |
#3
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
R.H. wrote:
http://puzzlephotos.blogspot.com/ 651: Lengthy explanation, because I'm missing the words: If you buy wool (for nitting or weaving), you get that in "rounds". Put that round over the device and place it that it gets into the cissors. By pushing the left hub to the right, the wool ring gets tensioned and round. Now you can unwind the thread to whatever you want. Maybe spools when you want to weave. My mom, who did a lot of weaving, had something similar out of wood. Nick -- Motor Modelle // Engine Models http://www.motor-manufaktur.de DIY-DRO // Eigenbau-Digitalanzeige http://www.yadro.de |
#4
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
On Thu, 27 Apr 2006 08:12:58 GMT, "R.H." wrote:
,;The latest set has just been posted: ,; ,;http://puzzlephotos.blogspot.com/ 651 is used to wind cable, wire, rope, etc. Typically found in hardware stores. |
#5
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
Hey Rob, 651 is a winder, used to wind wire or sting or rope or whatever into a coil. After winding on the required amount, the "wire" is bundled with paper or tied somehow, then the "fingers" are collapsed as in the last pix, and the load is free to carry away. Used to be very common in hardware stores, and works really neat. Often seen with a "lineal counter" to measure the amount being wound on. On Thu, 27 Apr 2006 08:12:58 GMT, "R.H." wrote: The latest set has just been posted: http://puzzlephotos.blogspot.com/ Rob |
#6
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
"Unknown" wrote in message ... On Thu, 27 Apr 2006 08:12:58 GMT, "R.H." wrote: ,;The latest set has just been posted: ,; ,;http://puzzlephotos.blogspot.com/ 651 is used to wind cable, wire, rope, etc. Typically found in hardware stores. Yep - we built one at work this week... |
#7
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
648. Potato Masher 649/50. Farrier's tools (SWAG) 651. Rope/Wire winder 652. ? 653. Mill wheel? I find it odd that the outside should be so heavily built, but with only 2 "spokes." -Phil Crow |
#8
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
|
#9
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
"R.H." wrote in message ... The latest set has just been posted: http://puzzlephotos.blogspot.com/ Rob 653. Pulley for a wide leather belt. |
#10
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
On Thu, 27 Apr 2006 08:12:14 -0500, Chuck Taylor wrote:
On 27 Apr 2006 05:58:51 -0700, wrote: 653. Mill wheel? I find it odd that the outside should be so heavily built, but with only 2 "spokes." A pulley for old belt-driven machinery, no? Maybe lay it down, it could be a foot wheel for a potter's wheel. Or just some kind of flywheel. But it looks like marble, which would be entirely decorative - maybe a stylized wheel from a sculpture of a chariot or something. ;-) Cheers! Rich |
#11
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
On Thu, 27 Apr 2006 06:46:31 -0500, dwilkins wrote:
On Thu, 27 Apr 2006 08:12:58 GMT, "R.H." wrote: ,;The latest set has just been posted: ,; ,;http://puzzlephotos.blogspot.com/ 651 is used to wind cable, wire, rope, etc. Typically found in hardware stores. Well, ya gotta get up pretty early in the morning to keep up with you guys! Cheers! Rich |
#12
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
"Leon" wrote in message . net... "R.H." wrote in message ... The latest set has just been posted: http://puzzlephotos.blogspot.com/ Rob 653. Pulley for a wide leather belt. 653 Yup! 649 Just a SWAG, but looks like a "temporary" bull nose ring. We had one shaped more like a pair of pliers with round bulbous ends on the farm. Handle ends were set up with small rings to put a rope through & hold it closed. This strikes me as very similar, shove the bulls nose into the opening & the prongs would tend to close up when the nose pressed into the center part. 651 Already identified as a reel for wire, rope, etc. The rest? Damfino! -- Nahmie The only road to success is always under construction. |
#13
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
653 line shaft wheel. Looks to be a 1 1/2 bore. -- Steve W. Life is not like a box of chocolates it's more like a jar of jalapenos- what you do today could burn your ass tomorrow! wrote in message ups.com... 648. Potato Masher 649/50. Farrier's tools (SWAG) 651. Rope/Wire winder 652. ? 653. Mill wheel? I find it odd that the outside should be so heavily built, but with only 2 "spokes." -Phil Crow ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
#14
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
"Alexander Thesoso" wrote in message news:dM04g.4809$7c.1745@trndny01... Good ones! On 650, are the bulbous centers of the round pieces rotary joints? I don't think that they are, to be used as intended it isn't necessary the pieces rotate. This one doesn't belong to me so I can't take a look right now. Btw, the seller was asking $165 for this item. Rob |
#15
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
I know the word you are looking for.
It is called a swift. But I think this one is for wire.It is built to heavy. Paul K. Dickman ""Nick Müller"" wrote in message ... R.H. wrote: http://puzzlephotos.blogspot.com/ 651: Lengthy explanation, because I'm missing the words: If you buy wool (for nitting or weaving), you get that in "rounds". Put that round over the device and place it that it gets into the cissors. By pushing the left hub to the right, the wool ring gets tensioned and round. Now you can unwind the thread to whatever you want. Maybe spools when you want to weave. My mom, who did a lot of weaving, had something similar out of wood. Nick -- Motor Modelle // Engine Models http://www.motor-manufaktur.de DIY-DRO // Eigenbau-Digitalanzeige http://www.yadro.de -- NewsGuy.Com 30Gb $9.95 Carry Forward and On Demand Bandwidth |
#16
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
A couple have been answered correctly so far:
648. Haven't been able to verify this one, the seller thought that it might be a drink mixer, it's stamped "Germany" and also has the Henckel company logo on it. The small piece sticking out of the side could be used to hang it inside of a glass when you are done stirring, but I'm not sure why anyone would want to do that. 649. Thanks to Leo for submitting this piece, here is his description of it, maybe it will jog someone's memory: "It's clear to me that it is designed to be mounted on a matching bracket, to be adjustable horizontally. The picture may not show this clearly enough, but the part that looks like a license plate bracket has notches on the upper edge. I surmise that it is to hold a board or a plate of some sort--the two curved levers would be depressed by the weight of the inserted plate, and would close on it." 650. I'll give a hint on this item: it's used near a fire. 651. Hardware store rope winder 652. A photo showing a wider view of this close-up can be seen he http://img.photobucket.com/albums/v8...4/pic652ab.jpg 653. Wooden pulley from a blacksmith's shop I don't have the answer page complete yet, I'll have it posted probably tomorrow or Sunday. http://puzzlephotos.blogspot.com/ Rob |
#17
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
According to R.H. :
The latest set has just been posted: http://puzzlephotos.blogspot.com/ O.K. Diving in late, because I never got to this newsgroup yesterday -- or the day before. :-) Posting from rec.crafts.metalworking -- as usual: 648) It sort of looks like something for mixing foods, except that I *think* that the projection half-way up the shank will move some of those vanes relative to others, for whatever reason. No real idea what it is supposed to do, however. 649) Hmm ... looks as though there is either a rack gear or at least a ratchet on the arm sticking out to the left. It looks as though the pivoted section gets in the way of the other, so there is no way to swing them past perhaps maybe a 90 degree swing. Given the orientation of the printing, it was designed to slip down over the edge of a board or something similar and clamp on it with the bent arms as the edge pressed on the straight arms. 650) The legs are not strong enough for it to be used to shape metal, so I suspect that it is inteded to use heat to shape either cloth or hair. 651) At least I have seen these before. It is for winding wire (or rope) from a spool into a round grouping where it can be secured by a few ties between the arms. It is then collapsed, and the tied roll is removed and handed to the purchaser. I've usually seen these used in combination with a counter to measure the length of product which the customer bought. 652) First guess was hands of either a clock or a watch, however, on a second look at the photos, I would suggest that it is part of an old artificial horizon for an aircraft. There would be a gyro inside, likely powered by 115V 400Hz, three phase. (Just a 3-pin connector on the ones which I have, perhaps more pins, if there is a "Caged" sign which can flip out when the gyro is not spun up. 653) A pulley for a big flat-belt -- likely for taking power from an old portable steam engine to something like a portable sawmill, or some kind of agricultural machinery. I've seen a long 6" wide flat belt powering a sawmill at steam engine demos. Enjoy, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#18
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
"DoN. Nichols" wrote: (649) Hmm ... looks as though there is either a rack gear or at least a ratchet on the arm sticking out to the left. It looks as though the pivoted section gets in the way of the other, so there is no way to swing them past perhaps maybe a 90 degree swing. Given the orientation of the printing, it was designed to slip down over the edge of a board or something similar and clamp on it with the bent arms as the edge pressed on the straight arms. (clip) ^^^^^^^^^^^^^^^ Don, what you are seeing as a rack or ratchet is actually just a serrated edge, which seems to be intended to hold it in a set position after it slides along the slot and is tightened. You seem to have the actionof the two levers figured out. As I see it, a flat board or plate of some sort enters and presses on the levers, closing them, holding the plate or board vertical and centered. Now, help me figure out where and how this would have been used. -----Leo (who supplied the item.) |
#19
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
Paul K. Dickman wrote:
I know the word you are looking for. It is called a swift. But I think this one is for wire.It is built to heavy. Yes, you are right. The purpose and usage is the same. Nick -- Motor Modelle // Engine Models http://www.motor-manufaktur.de DIY-DRO // Eigenbau-Digitalanzeige http://www.yadro.de |
#20
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
According to Leo Lichtman :
"DoN. Nichols" wrote: (649) Hmm ... looks as though there is either a rack gear or at least a ratchet on the arm sticking out to the left. It looks as though the pivoted section gets in the way of the other, so there is no way to swing them past perhaps maybe a 90 degree swing. Given the orientation of the printing, it was designed to slip down over the edge of a board or something similar and clamp on it with the bent arms as the edge pressed on the straight arms. (clip) ^^^^^^^^^^^^^^^ Don, what you are seeing as a rack or ratchet is actually just a serrated edge, which seems to be intended to hold it in a set position after it slides along the slot and is tightened. O.K. Somewhat similar to a ratchet, at least. You seem to have the actionof the two levers figured out. As I see it, a flat board or plate of some sort enters and presses on the levers, closing them, holding the plate or board vertical and centered. Now, help me figure out where and how this would have been used. -----Leo (who supplied the item.) I suspected that last, even before reaching that last line. :-) Well ... I think that the arm with the serration was attached to a lever which dropped down on a board, possibly part of a side panel for a wagon or something similar -- perhaps to hold it in place while some finishing touches were applied to it. But without seeing it in situ, or in a book which documents its function, this just has to be a guess. Good Luck, DoN. -- Email: | Voice (all times): (703) 938-4564 (too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html --- Black Holes are where God is dividing by zero --- |
#21
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
649 is a bench dog, patent 591519
(http://www.pat2pdf.org/patents/pat591519.pdf). It was patented by E. Zimerman. Read url for details how it works. |
#22
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
"Smaug Ichorfang" wrote in message ... 649 is a bench dog, patent 591519 (http://www.pat2pdf.org/patents/pat591519.pdf). It was patented by E. Zimerman. Read url for details how it works. Thanks for solving this one! How did you find the pdf file? I did some searching and didn't see it, also I tried a patent search on pat2pdf.org using the date but didn't have any luck. Rob |
#23
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
"R.H." wrote: Thanks for solving this one! How did you find the pdf file? (clip) ^^^^^^^^^^^^^^^^ Yeah, I'd like to know too. |
#24
Posted to rec.crafts.metalworking,rec.puzzles,rec.woodworking
|
|||
|
|||
What is it? CXII
"R.H." wrote in news:jb85g.23070$mh.14077
@tornado.ohiordc.rr.com: Thanks for solving this one! How did you find the pdf file? Smaug good at brute force methods. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
What is it? CXII | Metalworking |