Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Angled or Straight for trim work
I'm looking to pick up a cordless nailer for some trim and crown
work...most likely considering the Paslode line but I'm open to other options. Since this is mostly for trim work, should I strongly consider an angled nailer? The only reason why I shouldn't is because of it's availability in my area for both the gun and nails. In Canada, at least in Vancouver, Home Depot, Rona, Loews, no where seems to carry the angled Paslode or angled finish 16ga nails. I CAN order everything online and I don't mind that but would a straight nailer work without TOO much problems or would I be better served with an angled? Thanks in advance... sw. |
#2
Posted to rec.woodworking
|
|||
|
|||
Angled or Straight for trim work
|
#3
Posted to rec.woodworking
|
|||
|
|||
Angled or Straight for trim work
Get the angled nailer. Don't need it often but when you do...
|
#4
Posted to rec.woodworking
|
|||
|
|||
Angled or Straight for trim work
wrote in message oups.com... I'm looking to pick up a cordless nailer for some trim and crown work...most likely considering the Paslode line but I'm open to other options. Since this is mostly for trim work, should I strongly consider an angled nailer? The only reason why I shouldn't is because of it's availability in my area for both the gun and nails. In Canada, at least in Vancouver, Home Depot, Rona, Loews, no where seems to carry the angled Paslode or angled finish 16ga nails. I CAN order everything online and I don't mind that but would a straight nailer work without TOO much problems or would I be better served with an angled? Thanks in advance... sw. Oh hell, bite the bullet and get them both! That way you won't have to worry about it and you'll have either if you need it again! |
#5
Posted to rec.woodworking
|
|||
|
|||
Angled or Straight for trim work
wrote in message oups.com... I'm looking to pick up a cordless nailer for some trim and crown work...most likely considering the Paslode line but I'm open to other options. Since this is mostly for trim work, should I strongly consider an angled nailer? The only reason why I shouldn't is because of it's availability in my area for both the gun and nails. In Canada, at least in Vancouver, Home Depot, Rona, Loews, no where seems to carry the angled Paslode or angled finish 16ga nails. I CAN order everything online and I don't mind that but would a straight nailer work without TOO much problems or would I be better served with an angled? Thanks in advance... I would go with the angled nailer however the nails for angled nailers can some times cost more. Just something to consider. Also Paslode has been around for a long time and the airless Paslode framing nail gun that I have used has been dependable in the past 5 or 6 years. |
#6
Posted to rec.woodworking
|
|||
|
|||
Angled or Straight for trim work
Thanks for all the replies...looks like I'll get the angled and have to
keep getting nails online somewhere...that ships to Canada as well. Two guns...now that's nice...until my wife finds out. sw. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
repost - teahing kids woodworking - great story | Woodworking | |||
Yet more on electrical work and regs. | UK diy | |||
Plagiarism | Woodturning | |||
How to find a good contractor? | Home Repair | |||
Electrical work - would inspector check previously done work? | Home Repair |