When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?

wrote:

When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?

For a professional putz, this troll sounds amateurish.
j4

wrote in message
...
When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?


Buy some pot man.......
Then you won't care......

Sat, Jan 7, 2006, 10:09am (EST-3) (jo4hn) did
scribeth:
For a professional putz, this troll sounds amateurish. * * * j4

True. But, on the off chance he is serious, all he needs to do is
just cut out the center of the chair seats, so he will sit lower No
problem trying to get the legs even to prevent wobbling that way too.



JOAT
You'll never get anywhere if you believe what you "hear".
What do you "know"?
- Granny Weatherwax

In article ,
wrote:
When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?


For the rear legs, you use a back saw.

For the front legs, you can't do it with a saw. it requires a fore plane.

Next question?

On Sat, 07 Jan 2006 10:09:41 -0800, jo4hn
wrote:

wrote:

When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?

For a professional putz, this troll sounds amateurish.
j4

Did you say you're a TROLL?
Shame on you. I hope your mother and your 1st grade teacher knows
about this !!!

Robert Bonomi wrote:
In article ,
wrote:

When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?



For the rear legs, you use a back saw.

For the front legs, you can't do it with a saw. it requires a fore plane.

Next question?


Fore plane is what my first wife insisted on having too much of before
we got down to brass tacks.
oooooo,
j4

"jo4hn" wrote in message

Fore plane is what my first wife insisted on having too much of before
we got down to brass tacks.

With a bigger hammer that wouldn't be necessary.

--
www.e-woodshop.net
Last update: 12/13/05

On Sat, 07 Jan 2006 11:35:51 -0600,
wrote:

When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?


Here's what I'd do. No special tools needed; it's about the
technique...

You'll need...

a flat surface that can accommodate all legs of the chair(s),
a pencil
clamps
fine tooth hand saw such as a dovetail saw
mirror
workbench
sandpaper

Procedure...
Place the chair on a flat surface. With a sharp pencil kept against
the flat surface trace around each leg. You may need a "riser" for
the pencil unless you just want to lower the chair 1/8". Position
and clamp the chair to the workbench. Use the mirror to monitor your
cut on the opposite side of the leg, else you will be bobbing your
head to see the cut. Chamfer the end of each leg with a file or
sandpaper. Easy.

wrote:

When I had to cut the legs shorter on my table, I bought a table
saw. Now that the table is shorter, I need to cut the legs shorter
on my chairs. No one sells a chair saw. What should I buy for
this?


You don't have to cut the chair legs. You only have to cut the back.
For that all you'll need is a back saw ;-)

Phisherman wrote:

On Sat, 07 Jan 2006 11:35:51 -0600,
wrote:

When I had to cut the legs shorter on my table, I bought a table
saw. Now that the table is shorter, I need to cut the legs shorter
on my chairs. No one sells a chair saw. What should I buy for
this?


Here's what I'd do. No special tools needed; it's about the
technique...

You'll need...

a flat surface that can accommodate all legs of the chair(s),
a pencil
clamps
fine tooth hand saw such as a dovetail saw
mirror
workbench
sandpaper

Procedure...
Place the chair on a flat surface. With a sharp pencil kept
against the flat surface trace around each leg. You may need a
"riser" for the pencil unless you just want to lower the chair
1/8". Position and clamp the chair to the workbench. Use the
mirror to monitor your cut on the opposite side of the leg, else
you will be bobbing your head to see the cut. Chamfer the end of
each leg with a file or sandpaper. Easy.


Something about can't see the forest for the trees comes to mind.

The Robert Bonomi entity posted thusly:

In article ,
wrote:
When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?


For the rear legs, you use a back saw.

For the front legs, you can't do it with a saw. it requires a fore plane.

I tried using fore plane, but every time I do, the wife won't let me
out of the house for a while.

I want to die peacefully, in my sleep, like
my grandfather, not screaming in terror,
like his passengers.

A big band sits on chairs when they play - why not use a big band saw?

On Sat, 07 Jan 2006 11:35:51 -0600,
wrote:

When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?

Robert Bonomi (in ) said:

| For the rear legs, you use a back saw.
|
| For the front legs, you can't do it with a saw. it requires a fore
| plane.

More economical to use a buck saw.

--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/solar.html

Swingman wrote:
"jo4hn" wrote in message

Fore plane is what my first wife insisted on having too much of before
we got down to brass tacks.

With a bigger hammer that wouldn't be necessary.


Yabbut does she have big hooters?

Tom in KY, foreplane is not so bad if you have plenty to do :-D

Buy a cordless drill. Reattach the cut-offs to the table. Buy yourself
some platform shoes and a booster-seat so you can see what's on the
table.

Tom in KY, I know short people when I see 'em.

I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?

No saw needed. Simply take the chairs outside and put them on your
driveway. Take two bags of concrete and stack them on the chair seats
and drag them up and down the driveway until they are the desired
height.

Alternately, you can chew the legs off while watching TV. Make sure
you mark your chew line though, so you will know when to stop.

You can't just run out a buy a tool every time you have a new project.

Robert

You'd have to speak to the Chairman in charge.

wrote in message
...
When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?

"Phisherman" wrote in message
...
On Sat, 07 Jan 2006 11:35:51 -0600,
wrote:

When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?

[snip]

.. . . and I just bought a drum sander, so if anyone has any percussion
instruments they want smoothed --

that's easy, a Samurai sword!! with practice you can the legs even

Since these are legs, you'll have to call a surgeon to perform an
amputation.





wrote:

When I had to cut the legs shorter on my table, I bought a table saw.
Now that the table is shorter, I need to cut the legs shorter on my
chairs. No one sells a chair saw. What should I buy for this?