Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Bill
 
Posts: n/a
Default recycled fiber board question

Is is ok to use recycled fiber board on outside projects like trim on houses and
deck?

Thanks
Bill

I


  #2   Report Post  
Herman Family
 
Posts: n/a
Default recycled fiber board question

That depends on how you recycle it. If you were to make sure it had plenty
of wet strength additive, it might work out just fine. If it isn't going to
get wet, then even that wouldn't be an problem. Make sure it is well sealed
and primed. Also try a bit of product testing before you go and sell it to
the world.

Michael
"Bill" wrote in message
k.net...
Is is ok to use recycled fiber board on outside projects like trim on
houses and
deck?

Thanks
Bill

I




  #3   Report Post  
Mike Berger
 
Posts: n/a
Default recycled fiber board question

I'd bet against it. There was a class action lawsuit because
masonite siding didn't hold up well in many parts of the country.
I don't see how recycled fiber board is any better.

Bill wrote:
Is is ok to use recycled fiber board on outside projects like trim on houses and
deck?

Thanks
Bill

I


  #4   Report Post  
bremen68
 
Posts: n/a
Default recycled fiber board question

My experience with fiber board is.....Water/moisture + Fiberboard =
BAD

Had a storage area that needed a cover..Just needed something quick and
it was the right size. We primed, painted, and sealed it. It didn't
last long at all. This was under an overhang, which did give it some
protection, it did get some direct weather depending on the wind, but
over all it was out of direct sun and rain.

Didn't last a year.

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
To Ricodjove & tbasc: More On My Z Flashing Question, Please ? Robert11 Home Repair 2 July 12th 05 02:24 PM
LeCroy Oscilloscope/ VME/ CAMAC/ NIM/ FASTBUS repair fernando1222 Electronics Repair 0 June 7th 05 09:18 PM
Reswing Wide Board question Brian Siano Woodworking 28 May 26th 05 08:49 PM
Cutting board question Glenna Rose Woodworking 4 January 3rd 05 04:40 PM
Sony DVP-CX860 DVD Player Problem on MB-94 Board. Mr Bungle Electronics Repair 3 February 23rd 04 02:14 PM


All times are GMT +1. The time now is 04:32 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"