Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
My DIY blog, please comment
After all the great help I received here, I've started a blog so that I can
rant about some of the DIY jobs I do. If anyone is interested, i've jsut published a quick post about my home made router table. Please feel free to comment, good or bad. the blog is at http://trydiy.blogspot.com/ Thanks. |
#2
|
|||
|
|||
"jg" wrote in message ... After all the great help I received here, I've started a blog so that I can rant about some of the DIY jobs I do. If anyone is interested, i've jsut published a quick post about my home made router table. Please feel free to comment, good or bad. the blog is at http://trydiy.blogspot.com/ Thanks. Usually the "Welcome" is put at the top of the page instead of the bottom. Or is the default of a blog to put all new stuff at the top? |
#3
|
|||
|
|||
All of the blogs I read put the newest posts at the top of the page.
Seems to be a common convention with blogging. Neil |
#4
|
|||
|
|||
All of the blogs I read put the newest posts at the top of the page.
Seems to be a common convention with blogging. Yup. Not the same style as a NG. Robert |
#5
|
|||
|
|||
You could take the "welcome" and put it in the header. That way it
would remain around to explain the site. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
My DIY blog, please comment | UK diy | |||
A/C vacuum pump thread - thanks and a comment or two | Woodturning | |||
Pleas comment on these TIG welds | Metalworking | |||
Selfbuilder with "L" plates setting up blog | UK diy | |||
"TUBE GUYS" - Found this Pocket tube Tester In the Rafters - Please comment | Electronics Repair |