30% Off planes of all sorts.
The Plow plane is finished. It is a simple setup with 6 standard
blades. ¼" 3/16" 3/8" ½" 5/16" and 3/4" and ¼" thick. The steel sole
is 7/64" thick O-1 steel it is screwed and glued into the body. The
plane is about 10" long and about 4" high the fence can be used on
both sides of the plane. The regular price right now is 250.00 The
irons rest against one side of the plane to make setup easy and
measurements of where the dado starts a simple ipe block works for
the depthstop.
Now the plane will have brass parts for the fence. Pics soon
http://www.knight-toolworks.com/web_...plowplane1.jpg
http://www.knight-toolworks.com/web_...plowplane2.jpg

all planes if wanted have adjustable mouths. Also brass screwcaps if
you want
http://www.knight-toolworks.com/web_...obolobrass.jpg

New marking knives and hammers are now available.
http://www.knight-toolworks.com/web_.../newknives.jpg
made by CHESTER TOOLWORKS LLC and they are made from precision ground
3/32" thick O1 tool steel and are 5/16" wide. Snakewood, East Indian
Rosewood, Brazilian Tulipwood, or Gabon Ebony. 44.00 for the snakewood
and shipping 39.00 and shipping for the other woods.
New plane adjusting hammer
http://www.knight-toolworks.com/web_.../newhammer.jpg CTW
hammers are designed specifically for adjusting the blades and wedges
of wooden hand planes and infill hand planes. The polished brass and
Lignum Vitae head is weighted toward the brass striking end and is
designed so that it won't mar or mushroom the blade like steel
hammers. The Lignum end is of a smaller diameter and is used to tap
the toe or heel of the plane without leaving dent marks. It should
also be the end used for tapping wedges tight since it won't damage
the heel of the wedge. Handles are individually shaped from
Quartersawn White Ash with the grain oriented to prevent the runout
which weakens many other hammer handles. 45.00 plus shipping. New
plane idea's


Knight Toolworks in conjunction with Harrolson at
www.japanesetools.com have had these custom made Japanese irons made
for western planes. These are the first and only hand forged/laminated
Japanese irons that will fit a regular wedged plane. They are 2" wide
and 5.25" long and are a bit over ¼" thick. They will drop into any
knight Toolworks plane that uses a 2" iron with just a little mouth
and wedge adjustment. They are made from blue steel (holds and edge
longer then pretty much any tool steel on the market) and wrought
iron. I believe these to be the best irons out there over O-1 and A-2
irons. They will hold an edge longer then A-2 they will get sharper
they will leave a deeper/cleaner surface and they make the plane
easier to use. They will really help with tearout too.
They are hand stamped with Shizu Tani (tranquil valley) Shipping is
5.00 including insurance.
http://www.knight-toolworks.com/web_...ironcoffin.jpg
http://www.knight-toolworks.com/grap...gradeirons.jpg

Please check my page for all my planes www.knight-toolworks.com


I also have razee jointers and jack planes and scrubs.
http://www.knight-toolworks.com/wooden.htm
I have great looking/feeling coffin smoothers
http://www.knight-toolworks.com/graphics/coffin.jpg
All planes now have setscrews to center the irons in the body and make
adjusting the iron easy.

All planes are sanded/planed and finished with a special oil and wax
finish.


Knight-Toolworks
http://www.knight-toolworks.com
affordable handmade wooden planes