Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Can I get some opinions of my work?
I am fairly new to woodworking, I guess a novice would be the
appropriate term. I made some outdoor furniture and was wondering if some of you that have been doing it for a while can give me your opinions? http://community.webtv.net/Ferg_/Fergsoutdoor I can take criticism, but try not to be too harsh, haha. Thanks , Ferg |
#2
|
|||
|
|||
I am fairly new to woodworking, I guess a novice would be the
appropriate term. I made some outdoor furniture and was wondering if some of you that have been doing it for a while can give me your opinions? http://community.webtv.net/Fer=ADg_/Fergsoutdoor I can take criticism, but try not to be too harsh, haha. Your prices are _very_reasonable. I predict that you will be swamped with orders if you keep this up. Tom |
#3
|
|||
|
|||
"C F" wrote in message ... I am fairly new to woodworking, I guess a novice would be the appropriate term. I made some outdoor furniture and was wondering if some of you that have been doing it for a while can give me your opinions? http://community.webtv.net/Ferg_/Fergsoutdoor I can take criticism, but try not to be too harsh, haha. Thanks , Ferg Rounded corners and relieved edges are more people friendly... Tom |
#4
|
|||
|
|||
"C F" wrote in message ... I am fairly new to woodworking, I guess a novice would be the appropriate term. I made some outdoor furniture and was wondering if some of you that have been doing it for a while can give me your opinions? http://community.webtv.net/Ferg_/Fergsoutdoor I can take criticism, but try not to be too harsh, haha. Thanks , Ferg Rounded corners and relieved edges are more people friendly... Tom |
#5
|
|||
|
|||
Unless you are getting your lumber free, or you have access to slave
labor, seems to me you are under charging, or you are making under minimum wage. Have you worked out your costs, including all materials and labor, and you're still making a profit?? The work looks good. You could expand you're line to maybe 5-6 items. Where do you sell, aside from on the web? |
#6
|
|||
|
|||
I knock out a chair for about $22 material cost, and it takes about 2
1/2 hrs to build, so i figure i am making somewhere between $10-12 an hr, give or take. My first order of 4 chairs took about 10 hrs to build. I appreciate everyone's opinions. Thanks |
#8
|
|||
|
|||
Looks very uncomfortable. Maybe you could buy some cushions and charge
more? |
#9
|
|||
|
|||
"C F" wrote in message ... I knock out a chair for about $22 material cost, and it takes about 2 1/2 hrs to build, so i figure i am making somewhere between $10-12 an hr, give or take. My first order of 4 chairs took about 10 hrs to build. I appreciate everyone's opinions. Thanks OK for a cash generating side line, but not nearly enough to sustain a business. I want to earn at least $25 to $30 an hour so I'd have to charge double that to cover overhead. That would put your chair in the $175 range. I did not see your original post so I did not see the chair. Just because I want to price it that way, does not mean a buyer is willing to pay that much. |
#10
|
|||
|
|||
John Smith wrote: Looks very uncomfortable. Maybe you could buy some cushions and charge more? Or tell the customers where they can get cushions so they get to pick out the colors and patterns they want. -- FF |
#11
|
|||
|
|||
C F wrote: I am fairly new to woodworking, I guess a novice would be the appropriate term. I made some outdoor furniture and was wondering if some of you that have been doing it for a while can give me your opinions? http://community.webtv.net/Ferg_/Fergsoutdoor I agree with the other observation that easing the edges with a roundovah bit or radiusing plane would add a nice touch. Also, you might consider puting diagonal braces between the seat and the uprights of the b If you are interested in expanding your line, planters to go on either side of the bench might be an idea. Your stuff looks good to me. -- FF |
#12
|
|||
|
|||
Ferg,
Nice looking projects and as Thomas said, I would opt for rounded edges and corners and maybe practice your jointery and get rid of the screws and nails. Otherwise, great work and looks nice. Bob "C F" wrote in message ... I am fairly new to woodworking, I guess a novice would be the appropriate term. I made some outdoor furniture and was wondering if some of you that have been doing it for a while can give me your opinions? http://community.webtv.net/Ferg_/Fergsoutdoor I can take criticism, but try not to be too harsh, haha. Thanks , Ferg |
#13
|
|||
|
|||
Hi Ferg,
Nice work to start, but like anything else, it depends if you are actually selling your stuff. If you are, then no problem in your market. If you are selling too much to keep up then you should raise your prices a little at a time. If you are not selling much, the you need to refine your design and/or market. See other posts for design suggestions. I don't think that worrying about how much you make/hour is a good business model. It's better to make something that people really want and then adjust prices accordingly. Or, just do what you like for the fun of it and hope to cover expenses - or give stuff to friends/relatives. Me? I'm retired and enjoy woodworking. Don't worry too much about the time involved. Monday's (non- holidays) have become a favorite day of mine. Lou In article , Bob wrote: Ferg, Nice looking projects and as Thomas said, I would opt for rounded edges and corners and maybe practice your jointery and get rid of the screws and nails. Otherwise, great work and looks nice. Bob "C F" wrote in message ... I am fairly new to woodworking, I guess a novice would be the appropriate term. I made some outdoor furniture and was wondering if some of you that have been doing it for a while can give me your opinions? http://community.webtv.net/Ferg_/Fergsoutdoor I can take criticism, but try not to be too harsh, haha. Thanks , Ferg |
#14
|
|||
|
|||
On Sun, 3 Jul 2005 01:38:55 -0400, (C F) wrote:
I am fairly new to woodworking, I guess a novice would be the appropriate term. I made some outdoor furniture and was wondering if some of you that have been doing it for a while can give me your opinions? http://community.webtv.net/Ferg_/Fergsoutdoor Looks like it's carefully made, but doesn't look very comfortable. Specifically, the seat is flat (if you've got a bandsaw, you could put a dish in the frame the slats screw onto to make it more comfy) and the arms are angled downwards, instead of tilted back a little or flat. Might just be me, and I haven't sat in one, but that seems like a combination that would make a guy feel like he's about to slide out of the chair! OTHO, they're a bargin at what you're charging, so if you like them, keep it up! I can take criticism, but try not to be too harsh, haha. Thanks , Ferg |
#15
|
|||
|
|||
First thing I thought, before I even saw your work, was Ugh, WebTV. If you
are trying to make a business out fo it you should get a proper site to sell online or sell via e-bay. The stuff looks OK for what it is and its a starting point for you. I too wonder about the slant in the arms. Try putting one up on e-bay with no reserve and a starting price at your materials only cost. See what happens. Good luck. "C F" wrote in message ... I am fairly new to woodworking, I guess a novice would be the appropriate term. I made some outdoor furniture and was wondering if some of you that have been doing it for a while can give me your opinions? http://community.webtv.net/Ferg_/Fergsoutdoor I can take criticism, but try not to be too harsh, haha. Thanks , Ferg |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Plagiarism | Woodturning | |||
How to find a good contractor? | Home Repair | |||
Electrical work - would inspector check previously done work? | Home Repair | |||
Will 5C collet hold my work? | Metalworking | |||
Moisture Cure Urethane (Moisture Cured Urethane) | Woodworking |