 |
|
| Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
PC Pinner Set Problem- A Fix
A while back someone mentioned that the 23G pins were not properly set
below the surface when he used his PC pinner. While searching for something else I can across a post where another user with the same problem used a grinder to remove a bit of the nose and the problem was resolved. For what it's worth. Cheers, JG |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Outside drain problem... Who is responsible? | UK diy | |||
| SONY 35" Dual PIP -Video Blackout Problem | Electronics Repair | |||
| Paslode IM250A Cordless Finish Nailer, Stripped Treads Problem | Woodworking | |||
| Widespread problem with HP Omnibook XE3-GFs? | Electronics Repair | |||
| Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
Threaded Mode
