Home |
Search |
Today's Posts |
|
Woodturning (rec.crafts.woodturning) To discuss tools, techniques, styles, materials, shows and competitions, education and educational materials related to woodturning. All skill levels are welcome, from art turners to production turners, beginners to masters. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Woodfast vs. Vicmarc
In the pages of the Craft Supplies catalog, the Woodfast 20" lathe and the
Vicmarc VL300 look awfully similar in design and configuration. I realize both are made in Oz, but I'm curious as to which came first, and if a disgruntled employee of one company left to start the other, or what? Does anyone have knowledge of these two lathes and their history? TIA, Max |
#2
|
|||
|
|||
"Maxprop" skrev i melding ink.net... In the pages of the Craft Supplies catalog, the Woodfast 20" lathe and the Vicmarc VL300 look awfully similar in design and configuration. I realize both are made in Oz, but I'm curious as to which came first, and if a disgruntled employee of one company left to start the other, or what? Does anyone have knowledge of these two lathes and their history? A quick look reveals that the VIC is a _short_ lathe, mostly for bowl-turning,(max 500mm) while the Woodfast i a _long_ lathe, which also can handle long spindles (max 950mm) Otherwise both seem to be very good value. Bjarte |
#4
|
|||
|
|||
Outstanding Bill!!!! My lathe just doubled in price.......It is now a
collector's item..........:-) -- M.J. Orr http://www.island.net/~morr τΏτ ~ "Bill Rubenstein" wrote in message et... Woodfast also used to make a very nice shortbed lathe. Woodfast, however, is no longer building lathes at all. Vicmarc also builds longbed lathes but I'd guess that they sell many more of the shortbed. Once you turn bowls and hollow forms on a shortbed you will not want to go back to a longbed. Those machines with sliding headstocks, rotating headstocks, etc. are no substitute for a good shortbed. Bill In article , says... "Maxprop" skrev i melding ink.net... In the pages of the Craft Supplies catalog, the Woodfast 20" lathe and the Vicmarc VL300 look awfully similar in design and configuration. I realize both are made in Oz, but I'm curious as to which came first, and if a disgruntled employee of one company left to start the other, or what? Does anyone have knowledge of these two lathes and their history? A quick look reveals that the VIC is a _short_ lathe, mostly for bowl-turning,(max 500mm) while the Woodfast i a _long_ lathe, which also can handle long spindles (max 950mm) Otherwise both seem to be very good value. Bjarte |
#5
|
|||
|
|||
"Bill Rubenstein" wrote in message Woodfast also used to make a very nice shortbed lathe. Woodfast, however, is no longer building lathes at all. Vicmarc also builds longbed lathes but I'd guess that they sell many more of the shortbed. Once you turn bowls and hollow forms on a shortbed you will not want to go back to a longbed. Those machines with sliding headstocks, rotating headstocks, etc. are no substitute for a good shortbed. While I can guess at the reason for this, I'd appreciate your take on shortbed vs. longbed. Why would a longbed be any less desirable for bowls and hollows? Thanks in advance, Bill. Max |
#6
|
|||
|
|||
Maxprop said:
While I can guess at the reason for this, I'd appreciate your take on shortbed vs. longbed. Why would a longbed be any less desirable for bowls and hollows? Thanks in advance, Bill. I'm no expert, but my answer would be that the bed gets in the way of an optimal approach to the hollow of the bowl/vessel - interfering with both your body and your tool handles. Greg G. |
#7
|
|||
|
|||
Greg has pretty much nailed it. On a shortbed you can stand at the end of the lathe and keep
the tools near your body where you have more control. On a longbed you need to extend your arms, it is tiring, you lose control, etc. Or, you can use the old David Ellsworth method of riding the ways. The best way to find out the advantage of a shortbed -- try it. You will not want to go back. Bill In article , Greg G. says... Maxprop said: While I can guess at the reason for this, I'd appreciate your take on shortbed vs. longbed. Why would a longbed be any less desirable for bowls and hollows? Thanks in advance, Bill. I'm no expert, but my answer would be that the bed gets in the way of an optimal approach to the hollow of the bowl/vessel - interfering with both your body and your tool handles. Greg G. |
#8
|
|||
|
|||
Max,
I believe both come as a long bed or a short bed. The Woodfast is a 20" swing and the Vicmarc is a 24" swing. I've used both and like the Vicmarc better, but both are excellent machines. Joe Fleming - SAn Diego =========================== "Maxprop" wrote in message link.net... In the pages of the Craft Supplies catalog, the Woodfast 20" lathe and the Vicmarc VL300 look awfully similar in design and configuration. I realize both are made in Oz, but I'm curious as to which came first, and if a disgruntled employee of one company left to start the other, or what? Does anyone have knowledge of these two lathes and their history? TIA, Max |
#9
|
|||
|
|||
On Mon, 25 Oct 2004 04:29:48 GMT, "Maxprop"
wrote: In the pages of the Craft Supplies catalog, the Woodfast 20" lathe and the Vicmarc VL300 look awfully similar in design and configuration. I realize both are made in Oz, but I'm curious as to which came first, and if a disgruntled employee of one company left to start the other, or what? Does anyone have knowledge of these two lathes and their history? Don't know much about them as I am not interested in a new lathe but they are made in different states, about 1500 km apart, Vicmarc in Queensland and Woodfast in South Australia. As far as I know, Woodfast is the older company. Alan in beautiful Golden Bay, Western Oz, South 32.25.42, East 115.45.44 GMT+8 VK6 YAB ICQ 6581610 to reply, change oz to au in address |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Nova2 vs Vicmarc: Advice please | Woodturning | |||
Vicmarc VL200 | Woodturning | |||
Vicmarc Chuck | Woodturning |