Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
Hello All
I removed an old transparent plastic Window vent/fan (not powered) whilst refurbuing the kitchen window and have managed to break it. Ive searched around for a new replacement but have not had much luck tracking one down. The hole size is around 7" diameter and the vent must be able to be opened and shut. Anyone know where I can get one from, i've looked in B&Q, Wickes, Homebase, Focus but nothing really matches what I need. Any ideas? Cheers all TIA Richard |
#2
![]() |
|||
|
|||
![]() wrote in message oups.com... Hello All I removed an old transparent plastic Window vent/fan (not powered) whilst refurbuing the kitchen window and have managed to break it. Ive searched around for a new replacement but have not had much luck tracking one down. The hole size is around 7" diameter and the vent must be able to be opened and shut. Anyone know where I can get one from, i've looked in B&Q, Wickes, Homebase, Focus but nothing really matches what I need. Any ideas? Cheers all TIA Richard ============== Two sizes available. Despite the warning about not being suitable for double glazing it is possible to fit one into a DG unit provided that the holes are carefully cut and sealed around the perimeter (of the circular holes). http://www.diy.com/diy/jsp/bq/produc...RODID=17 6902 Watch for the wrap! Cic. |
#3
![]() |
|||
|
|||
![]() Cicero wrote: wrote in message oups.com... Hello All I removed an old transparent plastic Window vent/fan (not powered) whilst refurbuing the kitchen window and have managed to break it. Ive searched around for a new replacement but have not had much luck tracking one down. The hole size is around 7" diameter and the vent must be able to be opened and shut. Anyone know where I can get one from, i've looked in B&Q, Wickes, Homebase, Focus but nothing really matches what I need. Any ideas? Cheers all TIA Richard ============== Two sizes available. Despite the warning about not being suitable for double glazing it is possible to fit one into a DG unit provided that the holes are carefully cut and sealed around the perimeter (of the circular holes). http://www.diy.com/diy/jsp/bq/produc...RODID=17 6902 Watch for the wrap! Cic. Thats the ticket, in fact its the exact one I broke, except my one never had the cord which has been pulled off. I wondered why it was so hard to close! Thanks very much Cheers Richard |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Where oh where to put an ouside dryer vent from below ground | Home Repair | |||
The Twisted Rod window system question - more appropriate post | Home Repair | |||
Common and/or Legal definition of "casement window"? | Home Repair | |||
window plugs for soundproofing | Home Ownership | |||
Sagging bay window - probable cause found? | UK diy |