| Page 1 of 2 | 1 | 2 |
|
|
QUIET ceiling switch?
The ceiling switch in my bathroom is as noisy as hell. Pull the cord
to turn on the light and it makes a very loud "kerching" noise. No, you can't have a better description! :) During the day it's not so bad, you get used to it, but at night it can wake up my son who sleeps in the room next to the bathroom. So, who makes a switch thats quiet? I've been in to my local branch of CEF and tried thiers and I've been to the sheds. They all seem noisy. (The current one is a Wikes own brand and nearly new). Is it inherent in the design of the switchgear? Thanks for any pointers. -- Regards from Mike Barnard South Coast, UK. [To reply by email remove ".trousers" spamtrap from email address] |
there is but sorry cant for the life of me find a link someone on here will
have it im sure.. "Mike Barnard" wrote in message ... The ceiling switch in my bathroom is as noisy as hell. Pull the cord to turn on the light and it makes a very loud "kerching" noise. No, you can't have a better description! :) During the day it's not so bad, you get used to it, but at night it can wake up my son who sleeps in the room next to the bathroom. So, who makes a switch thats quiet? I've been in to my local branch of CEF and tried thiers and I've been to the sheds. They all seem noisy. (The current one is a Wikes own brand and nearly new). Is it inherent in the design of the switchgear? Thanks for any pointers. -- Regards from Mike Barnard South Coast, UK. [To reply by email remove ".trousers" spamtrap from email address] |
On Sun, 06 Feb 2005 16:21:36 +0000, Mike Barnard
strung together this: So, who makes a switch thats quiet? The Legrand ceiling switches are fairly quiet. There is the dimmable pull switch available from http://www.tlc-direct.co.uk that is silent but isn't just a on\off switch. -- SJW Please reply to group or use 'usenet' in email subject |
Mike Barnard wrote:
The ceiling switch in my bathroom is as noisy as hell. Pull the cord to turn on the light and it makes a very loud "kerching" noise. No, you can't have a better description! :) Depends on how quiet you want it... I used on of these recently: http://www.tlc-direct.co.uk/Products/CM2781.html And it is much quieter than many, it gives a single click when pulled rather than the more common "click clack" type of action. If you want silent, then you may need to look at one of the pull cord dimmers. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
In article ,
Mike Barnard wrote: So, who makes a switch thats quiet? I've been in to my local branch of CEF and tried thiers and I've been to the sheds. They all seem noisy. (The current one is a Wikes own brand and nearly new). Is it inherent in the design of the switchgear? I hate the b***dy things and would replace it with a wall one outside the bathroom - if necessary. However, IIRC, TLC do a dimmer version which is silent in operation - and suitable for loads up to 250 watts of mains or LV, but not obviously any type of low energy or fluorescent. Its part number is TL PCD51 and costs 17.99 + vat. -- *I started out with nothing... and I still have most of it. Dave Plowman London SW To e-mail, change noise into sound. |
Dave Plowman (News) wrote:
I hate the b***dy things and would replace it with a wall one outside the bathroom - if necessary. A kindred spirit! My builder looked at me very oddly when I said I wanted the bathroom light switches outside on the wall, but I was paying, so he shrugged and did it. I can live with the remote possibility of somebody accidentally (or deliberately) turning off the lights while I'm in there, if it means avoiding those horrible dangly bits of string :-) -- Tony |
During the day it's not so bad, you get used to it, but at night it
can wake up my son who sleeps in the room next to the bathroom. On a similar vein, anyone recommend a source of quiet ceiling fans for bathroom. The one I've got fitted sounds like a jumbo jet when it turns on (automatically) with the light. Wakes everyone up and isn't conducive to a relaxing bath. Thanks, Rob. |
On Sun, 06 Feb 2005 16:21:36 +0000, Mike Barnard
wrote: The ceiling switch in my bathroom is as noisy as hell. Pull the cord to turn on the light and it makes a very loud "kerching" noise. No, you can't have a better description! :) During the day it's not so bad, you get used to it, but at night it can wake up my son who sleeps in the room next to the bathroom. So, who makes a switch thats quiet? I've been in to my local branch of CEF and tried thiers and I've been to the sheds. They all seem noisy. (The current one is a Wikes own brand and nearly new). Is it inherent in the design of the switchgear? Sheltered homes for the elderly frequently have emergency "pull-cord" alarm switches. I don't know whether these are "momentary" action or "latching", but they are silent. I should imagine any wholesaler or proper retail outlet would be able to source these "no problem". If they are "momentary" you may be able to buy or build yourself a switching box to toggle the light on or off. -- Frank Erskine Sunderland |
On Sun, 06 Feb 2005 22:12:26 GMT, "Rob Nicholson"
strung together this: On a similar vein, anyone recommend a source of quiet ceiling fans for bathroom. The one I've got fitted sounds like a jumbo jet when it turns on (automatically) with the light. Wakes everyone up and isn't conducive to a relaxing bath. Inline fan somewhere else is much better than one in the bathroom. Try a Vent-Axia. -- SJW Please reply to group or use 'usenet' in email subject |
On Sun, 6 Feb 2005 23:20:30 +0000 (UTC), Frank Erskine
strung together this: Sheltered homes for the elderly frequently have emergency "pull-cord" alarm switches. I don't know whether these are "momentary" action or "latching", but they are silent. I should imagine any wholesaler or proper retail outlet would be able to source these "no problem". They are 12V momentary usually, most definitely are if the ones you have seen are silent. -- SJW Please reply to group or use 'usenet' in email subject |
On Sun, 06 Feb 2005 16:21:36 +0000, Mike Barnard
wrote: Just a quick follow up before I go to bed. Thanks to all and I just may consider moving the switch outside. -- Regards from Mike Barnard South Coast, UK. [To reply by email remove ".trousers" spamtrap from email address] |
"Tony Eva" wrote in message ... Dave Plowman (News) wrote: I hate the b***dy things and would replace it with a wall one outside the bathroom - if necessary. A kindred spirit! My builder looked at me very oddly when I said I wanted the bathroom light switches outside on the wall, but I was paying, so he shrugged and did it. I can live with the remote possibility of somebody accidentally (or deliberately) turning off the lights while I'm in there, if it means avoiding those horrible dangly bits of string :-) But can you live with the admittedly lowish risk that someone with really wet hands (or the person who follows them) gets a belt from the switch ? Maybe it's because I have childhood memories of getting a shock from a light switch in my parents' kitchen. |
"Tony Eva" wrote in message ... Dave Plowman (News) wrote: I hate the b***dy things and would replace it with a wall one outside the bathroom - if necessary. A kindred spirit! My builder looked at me very oddly when I said I wanted the bathroom light switches outside on the wall, but I was paying, so he shrugged and did it. I can live with the remote possibility of somebody accidentally (or deliberately) turning off the lights while I'm in there, if it means avoiding those horrible dangly bits of string :-) But can you live with the admittedly lowish risk that someone with really wet hands (or the person who follows them) gets a belt from the switch ? Maybe it's because I have childhood memories of getting a shock from a light switch in my parents' kitchen. |
brugnospamsia wrote:
But can you live with the admittedly lowish risk that someone with really wet hands (or the person who follows them) gets a belt from the switch ? Well, to be honest, yes I can. First of all, that's true of any switch in a room with a basin or sink (like a kitchen, or a utility room), but mainly I don't subscribe to the "remove every tiny weeny bit of risk from life" view - IMHO, it's what has allowed Part P into our lives. Maybe it's because I have childhood memories of getting a shock from a light switch in my parents' kitchen. Everyone is entitled to their own view. I'm not wishing to criticise you at all - but if you bought my house, I'm afraid you'd have to move the bathroom light switches :-) -- Tony |
In article ,
brugnospamsia wrote: I can live with the remote possibility of somebody accidentally (or deliberately) turning off the lights while I'm in there, if it means avoiding those horrible dangly bits of string :-) But can you live with the admittedly lowish risk that someone with really wet hands (or the person who follows them) gets a belt from the switch ? Maybe it's because I have childhood memories of getting a shock from a light switch in my parents' kitchen. Where IMHO it is more likely. But no regs about cord switches. I also wonder about the health aspects of those cord thingies. -- *The first rule of holes: If you are in one, stop digging! Dave Plowman London SW To e-mail, change noise into sound. |
I hate the b***dy things and would replace it with a wall one outside the
bathroom - if necessary. I'm the same way and did exactly that in my last house., However, in some cases, it may now even be permissible to put them on the wall inside the bathroom. Unfortunately, this isn't the case on my new house (too proximate to the bath), so it will gain an outside switch at some point... Christian. |
On Mon, 07 Feb 2005 12:41:44 +0000, Christian McArdle wrote:
I hate the b***dy things and would replace it with a wall one outside the bathroom - if necessary. I'm the same way and did exactly that in my last house., However, in some cases, it may now even be permissible to put them on the wall inside the bathroom. Unfortunately, this isn't the case on my new house (too proximate to the bath), so it will gain an outside switch at some point... Christian. Would it be permissable to use a water proof wall switch (the sort with a membrane over the rocker) in a bathroom (I forget the definition of zone 1,2 etc, but on the wall by the door within 1m of the bath and basin but 2m from the shower)? Not as pretty though... Tim |
On Mon, 07 Feb 2005 13:16:27 +0000, Tim S wrote:
On Mon, 07 Feb 2005 12:41:44 +0000, Christian McArdle wrote: I hate the b***dy things and would replace it with a wall one outside the bathroom - if necessary. I'm the same way and did exactly that in my last house., However, in some cases, it may now even be permissible to put them on the wall inside the bathroom. Unfortunately, this isn't the case on my new house (too proximate to the bath), so it will gain an outside switch at some point... Christian. Would it be permissable to use a water proof wall switch (the sort with a membrane over the rocker) in a bathroom (I forget the definition of zone 1,2 etc, but on the wall by the door within 1m of the bath and basin but 2m from the shower)? Not as pretty though... Tim Though I just thought that perhaps such a switch isn't actually totally waterproof, or at least the metal clad box it fits isn't. I've only seen them fitted outside but protected from direct rain, in for example, a porch and under a car port. A full monty waterproof switch would be fairly ugly (unless you like the bathroom looking like the inside of a submarine). Question still stands though with provisos. Tim |
Mike Barnard wrote:
On Sun, 06 Feb 2005 16:21:36 +0000, Mike Barnard wrote: Just a quick follow up before I go to bed. Thanks to all and I just may consider moving the switch outside. Since that probably means rewiring, there is what would likely be a simpler solution. 1. Remove the noisy spring, replace it with something weaker so it operates, but no noisiness. 2. The switch is now no longer 240v rated, so add a miniature 1.1w transformer and a relay. The mains switch only switches 9v etc, the relay switches the mains. Mount relay in place with silicone. There might be another way as well, de[pensing on how its put together: 1. remove the switch inside the case and glue it back with silicone, which is flexible, non noise tranmitting, and noise absorbing. 2. Remove fitting from ceiling and replace again using silicone rather than screws - same deal. NT |
In article ,
Tim S wrote: Would it be permissable to use a water proof wall switch (the sort with a membrane over the rocker) in a bathroom (I forget the definition of zone 1,2 etc, but on the wall by the door within 1m of the bath and basin but 2m from the shower)? Not as pretty though... If you were really concerned, a low voltage coil stepping relay would be one answer. Or perhaps an isolating transformer in the lighting feed to that room. -- *Rehab is for quitters Dave Plowman London SW To e-mail, change noise into sound. |
Bolt one of theose external weatherproof switches to the wall :-)
I lived in Germany for a while, where they have a lot of rules, and the light switch in the bathroom was a regular switch next to the open unswitched power outlet. It was open 'cos the washing machine was plugged in at the other end of the bathroom. |
In uk.d-i-y, wrote:
Mike Barnard wrote: On Sun, 06 Feb 2005 16:21:36 +0000, Mike Barnard wrote: Just a quick follow up before I go to bed. Thanks to all and I just may consider moving the switch outside. Since that probably means rewiring, there is what would likely be a simpler solution. 1. Remove the noisy spring, replace it with something weaker so it operates, but no noisiness. 2. The switch is now no longer 240v rated, so add a miniature 1.1w transformer and a relay. The mains switch only switches 9v etc, the relay switches the mains. Mount relay in place with silicone. There might be another way as well, de[pensing on how its put together: 1. remove the switch inside the case and glue it back with silicone, which is flexible, non noise tranmitting, and noise absorbing. 2. Remove fitting from ceiling and replace again using silicone rather than screws - same deal. What I don't understand is: In decades long past, ceiling switches all worked with a discreet click. We have an old switch in one of the bedrooms and no-one would complain about it being noisy. But all modern switches have a loud twang. Why the change? -- Mike Barnes |
On Mon, 7 Feb 2005 16:07:13 +0000, Mike Barnes
strung together this: What I don't understand is: In decades long past, ceiling switches all worked with a discreet click. We have an old switch in one of the bedrooms and no-one would complain about it being noisy. But all modern switches have a loud twang. Why the change? They've not changed, in the olden days some were noisy, some weren't, just like todays range of switches. -- SJW Please reply to group or use 'usenet' in email subject |
On Mon, 07 Feb 2005 17:12:45 +0000, Lurch
wrote: On Mon, 7 Feb 2005 16:07:13 +0000, Mike Barnes strung together this: What I don't understand is: In decades long past, ceiling switches all worked with a discreet click. We have an old switch in one of the bedrooms and no-one would complain about it being noisy. But all modern switches have a loud twang. Why the change? They've not changed, in the olden days some were noisy, some weren't, just like todays range of switches. Personally, I reckon that they're made to do the job, to the electrical specs, as cheaply as possible. Sound doesn't seem to be on the agenda. Is it just me or is it such a NOISY world now. fx Walks off stage left, mumbling to self about the old days... -- Regards from Mike Barnard South Coast, UK. [To reply by email remove ".trousers" spamtrap from email address] |
Tim S wrote:
Would it be permissable to use a water proof wall switch (the sort with a membrane over the rocker) in a bathroom (I forget the definition of zone 1,2 etc, but on the wall by the door within 1m of the bath and basin but 2m from the shower)? Not as pretty though... You can use an ordinary switch in Zone 3 - i.e. more than 600mm from the nearest edge of the bath or shower tray. Switchgear closer to the bath than that needs to be SELV, not exceeding a nominal 12 V AC (or 30V DC). -- Andy |
Lurch wrote:
They've not changed, in the olden days some were noisy, some weren't, just like todays range of switches. I suspect it's ceilings that have changed, not switches. Plasterboard makes a good resonant sounding board whilst inch-thick lath and plaster has more mass and more damping, and hence has much more sound deadening effect. -- Andy |
In article ,
Lurch writes: On Sun, 6 Feb 2005 23:20:30 +0000 (UTC), Frank Erskine strung together this: Sheltered homes for the elderly frequently have emergency "pull-cord" alarm switches. I don't know whether these are "momentary" action or "latching", but they are silent. I should imagine any wholesaler or proper retail outlet would be able to source these "no problem". They are 12V momentary usually, most definitely are if the ones you have seen are silent. The switches are usually rated 6A mains, although they are probably run on 12V or 24V systems. They come with red pull cords long enough to reach the floor (so you can still pull them if you're on the floor). Often have a red triangle rather than the more normal acorn, and sometimes two (for one at normal height, one at near floor level). You can swap for a more normal pull cord though. -- Andrew Gabriel |
In article ,
Mike Barnard writes: The ceiling switch in my bathroom is as noisy as hell. Pull the cord to turn on the light and it makes a very loud "kerching" noise. No, you can't have a better description! :) During the day it's not so bad, you get used to it, but at night it can wake up my son who sleeps in the room next to the bathroom. So, who makes a switch thats quiet? I've been in to my local branch of CEF and tried thiers and I've been to the sheds. They all seem noisy. (The current one is a Wikes own brand and nearly new). Is it inherent in the design of the switchgear? Thanks for any pointers. What about using an occupancy sensor rather than a switch? -- Andrew Gabriel |
"Andy Wade" wrote in message ... Lurch wrote: They've not changed, in the olden days some were noisy, some weren't, just like todays range of switches. I suspect it's ceilings that have changed, not switches. Plasterboard makes a good resonant sounding board whilst inch-thick lath and plaster has more mass and more damping, and hence has much more sound deadening effect. I just went upstairs and unscrewed the cover of my 20-plus year old MK which makes a fairly loud noise. I had assumed it was the cylindrical housing that was resonating, but it turns out the switch is mounted on a quite minimal and rigid escutcheon and makes as much noise when operated in mid-air . On the positive side the switch has operated faultlessly all 20 years I've been in the house ... .... maybe I could melt some pitch into the voids and make up a sorbothane washer ...... probably needs a diffused OUTER surface since it's high frequencies we're talking about ..... It was never a problem for me before and I had plans to use more than one in the kitchen, but I will be now become obsessed with designing an alternative !! 30 years ago in the summer holidays I helped a French pharmacist set up his new shop and if I remember correctly all his lighting was switched by relays in a big cabinet on the landing. |
|
In article ,
Mike Barnard wrote: Personally, I reckon that they're made to do the job, to the electrical specs, as cheaply as possible. Sound doesn't seem to be on the agenda. Is it just me or is it such a NOISY world now. Many years ago, there was a range of near silent light switches, and advertised as such. IIRC, GEC 'Mutak' or similar? -- *Verbs HAS to agree with their subjects * Dave Plowman London SW To e-mail, change noise into sound. |
In article ,
brugnospamsia wrote: 30 years ago in the summer holidays I helped a French pharmacist set up his new shop and if I remember correctly all his lighting was switched by relays in a big cabinet on the landing. Would make some aspects of wiring easy, because if the coils were low voltage you could use cable similar to phone stuff for the switch runs. -- *Many hamsters only blink one eye at a time * Dave Plowman London SW To e-mail, change noise into sound. |
|
In article , Mike Barnard wrote: The ceiling switch in my bathroom is as noisy as hell. Pull the cord to turn on the light and it makes a very loud "kerching" noise. No, you can't have a better description! :) During the day it's not so bad, you get used to it, but at night it can wake up my son who sleeps in the room next to the bathroom. How about fitting a low energy bulb and just leaving it on all night? -- Mike Clarke |
"Colum Mylod" wrote in message ... On 7 Feb 2005 19:08:14 GMT, (Andrew Gabriel) wrote: In article , Mike Barnard writes: The ceiling switch in my bathroom is as noisy as hell. Pull the cord to turn on the light and it makes a very loud "kerching" noise. No, you can't have a better description! :) What about using an occupancy sensor rather than a switch? How's a bloke to pee in the dark if there's an occupancy sensor? :-) Close your eyes? Adam |
On Tue, 08 Feb 2005 17:39:07 GMT, "ARWadsworth"
wrote: "Colum Mylod" wrote in message .. . On 7 Feb 2005 19:08:14 GMT, (Andrew Gabriel) wrote: What about using an occupancy sensor rather than a switch? How's a bloke to pee in the dark if there's an occupancy sensor? :-) Close your eyes? Fair point. My unserious reply hid my preference for moving about in the twilight hours without suffering lights on, so for me an occupancy sensor is not the best solution (perhaps on a timeswitch, hmmm). I thought of replacing the ker-chunk I suffer with some hi-tech wave hand in front sensor (e.g. a beam break switch) but the only ones I dug up were high tech and high price. Occupancy sensors would have the same problem in loos as they do in offices - people sit still for a while and plunge into the dark. Especially true if the loo is in a bathroom and the victim has a long soak. Not sure of the regs in such a situation of the lights going out suddenly? -- New anti-spam address cmylod at despammed dot com |
brugnospamsia wrote: "Tony Eva" wrote in message ... Dave Plowman (News) wrote: I hate the b***dy things and would replace it with a wall one outside the bathroom - if necessary. A kindred spirit! My builder looked at me very oddly when I said I wanted the bathroom light switches outside on the wall, but I was paying, so he shrugged and did it. I can live with the remote possibility of somebody accidentally (or deliberately) turning off the lights while I'm in there, if it means avoiding those horrible dangly bits of string :-) But can you live with the admittedly lowish risk that someone with really wet hands (or the person who follows them) gets a belt from the switch ? So what about the light switch for the bedroom next to the bathroom? It's just as likely that someone coming out of the bathroom with wet hands could get a belt from there. MBQ |
Tony Eva wrote:
Dave Plowman (News) wrote: I hate the b***dy things and would replace it with a wall one outside the bathroom - if necessary. A kindred spirit! My builder looked at me very oddly when I said I wanted the bathroom light switches outside on the wall, I can live with the remote possibility of somebody accidentally (or deliberately) turning off the lights while I'm in there, if it means avoiding those horrible dangly bits of string :-) eek. Try hanging a heavy cast aluminium light pull from the 'dangly bit of string' to make the newly refurbed bathroom look nice & finished off. Cue my girlfriend shaking out a towel in there and getting the end caught up in the string, whipping the aforementioned light pull into just underneath her eye giving her a big shiner. Pleased she was not :-0 !! Cheers, Paul. |
In uk.d-i-y, Colum Mylod wrote:
Occupancy sensors would have the same problem in loos as they do in offices - people sit still for a while and plunge into the dark. I've lived with those on occasion - they're no problem, just wave to the light and it comes back on again. I imagine it isn't as annoying as it would be in an office (but I don't read in the loo), and there's less chance that you're sitting in a sensor blind spot. -- Mike Barnes |
wrote in message oups.com... brugnospamsia wrote: "Tony Eva" wrote in message ... Dave Plowman (News) wrote: I hate the b***dy things and would replace it with a wall one outside the bathroom - if necessary. A kindred spirit! My builder looked at me very oddly when I said I wanted the bathroom light switches outside on the wall, but I was paying, so he shrugged and did it. I can live with the remote possibility of somebody accidentally (or deliberately) turning off the lights while I'm in there, if it means avoiding those horrible dangly bits of string :-) But can you live with the admittedly lowish risk that someone with really wet hands (or the person who follows them) gets a belt from the switch ? So what about the light switch for the bedroom next to the bathroom? It's just as likely that someone coming out of the bathroom with wet hands could get a belt from there. I hadn't thought of that since my house isn't laid out that way, but I will now have to give some thought to making all the lights in my house operable with no risk of electric shock :-) Maybe it's cos I'm about to hit 45 and I live alone, but since I'm completely overhauling my house, it seems foolish not to make it as safe as possible .... |
| All times are GMT +1. The time now is 04:06 AM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter