Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Temperature of under-cupboard fluorescent fittings?
I recently fitted four 8W T5 under-cupboard fluorsecent 'cabinet
link-lights' manufactured by Eterna (pg. 17 of their 1MB catalogue at http://www.eterna-lighting.co.uk/eterna2.pdf) in my kitchen. Having not been impressed by the colour of the light I replaced the supplied 'standard' tubes with Osram Interna Lumilux tri-phosphor tubes with a filament-matching temperature of 2700K. The light output is now superb, both in terms of colour rendition and matching of the other lamps in the kitchen (filament and a cooker hood halogen). However, my only gripe is with the heat that the light fittings give off - not so much the tubes themselves but rather the actual fitting. Indeed the casing becomes too hot to touch with the consequence of some heating of the cupboards above. Knowing nothing about fluorescent technology I did some searching of past posts, and some other Internet publications, and now realise that given my fittings are quite heavy and have a 'standard' starter poking out of the back they thus are not 'electronic'? Thus, they use a standard choke inside which is creating all this heat? Are they also inefficient? The fittings are labelled as 'energy saving' however.. My question (finally!) is thus: What are my chances of being able to (cheaply) convert these fittings to electronic ballasts/starters? Would the guts of true slimline (slimline = must be electronic?) fittings (e.g. those from TLC at http://tinyurl.com/6aqjs) be transferrable? If so, which wattage would I need (mine are 8W)? Alternatively, would I be best just ditching my current setup in favour of the TLC items above (which would also provide flicker-free startup)? I do REALLY like my current 2700K output, however, so would the 3400K (still tri-phosphor) TLC tubes be noticeably different? If so, does anyone know where I could get hold of 2700K T4 tubes in the TLC lengths? Questions questions... Mat |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Temperature of under-cupboard fluorescent fittings? | UK diy | |||
Heat banks (again!) | UK diy | |||
fittings for take-apart cupboard | Woodworking | |||
How do tell a liquid from a solid? | Metalworking | |||
Kitchen cupboard door fittings | UK diy |