Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
CORGI visit - queries on regs
I just has a Corgi round to do a landlord's gas safety certificate. He
issued it, but pointed out two minor areas of concern which he says wants sorting - the gas hob needs an isolation valve (which can be in the void behind the built-in oven); and secondly, in said void there is an elbow in the gas pipework with compression fittings, which he wants replaced with a soldered elbow. I didn't really think about it till after he'd gone; but (a) what's the point of having an isolation valve in an inaccessible location and (b) if there's a problem using compression fittings with gas... don't isolation valves usually have these anyway? He also pointed out that if I didn't want to fail my electrical inspection, I would need to fit earth bonding across the 5 copper pipes entering and leaving the boiler (which is neither in the bathroom or kitchen). That one's news to me... is he correct, anyone?! David |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Corgi registered or not..? | UK diy | |||
CORGI bad plumber | UK diy | |||
Guarantee on new boiler DIY installed | UK diy |