Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]()
Hi all
I need to replace some old lead flashing that has been poorly fitted between one of the walls of my house and a 'lean to' style roof. Had a look at a few on line stores and I notice that there are codes (3 and 4)? What does this mean,and what sort should I be looking at for my job? Also, which of all the major DIY retailers would it best to try and buy some from? Thanks in advance Simon |
#2
![]() |
|||
|
|||
![]()
On Fri, 22 Oct 2004 21:12:16 +0100, Simon Hawthorne wrote:
I notice that there are codes (3 and 4)? What does this mean, ... The thickness, bigger the number the thicker the sheet is. ... and what sort should I be looking at for my job? I'd go for code 4, unless you are very exposed in which case code 5. Also, which of all the major DIY retailers would it best to try and buy some from? I wouldn't I'd go to a builders merchant. But do you need to replace the lead? Can it not be redressed to the roof and the pointing corrected? -- Cheers Dave. pam is missing e-mail |
#3
![]() |
|||
|
|||
![]() "Simon Hawthorne" wrote in message ... Hi all I need to replace some old lead flashing that has been poorly fitted between one of the walls of my house and a 'lean to' style roof. Had a look at a few on line stores and I notice that there are codes (3 and 4)? What does this mean,and what sort should I be looking at for my job? Also, which of all the major DIY retailers would it best to try and buy some from? Thanks in advance Simon Ibs per square foot AWEM |
#4
![]() |
|||
|
|||
![]()
Andrew Mawson wrote:
Ibs per square foot Oh so it is. I'd never twigged that very basic fact. But for those who prefer less archaic units: * ========================= * * Lead sheet to BS 1178 * * ========================= * * Code Thickness Weight * * No. mm kg/m^2 * * ---- --------- ------ * * 3 1.32 15.0 * * 4 1.80 20.4 * * 5 2.24 25.4 * * 6 2.65 30.1 * * 7 3.15 35.7 * * 8 3.55 40.3 * * ========================= * -- Andy |
#5
![]() |
|||
|
|||
![]()
Thanks all.
Been and had another look today and boght 6m x 150mm (code 3) - I think this will do the job nicely. Regards Simon |
#6
![]() |
|||
|
|||
![]()
In article , Simon
Hawthorne writes Thanks all. Been and had another look today and boght 6m x 150mm (code 3) - I think this will do the job nicely. How much?, most of the catalogues I have seen (not many) say POA. -- fred |
#7
![]() |
|||
|
|||
![]() How much?, most of the catalogues I have seen (not many) say POA. Local builders merchant charged me £18.75 (weighed 13kg) Si |
#8
![]() |
|||
|
|||
![]()
In article ,
fred wrote: How much?, most of the catalogues I have seen (not many) say POA. Apart from builders merchants, both my local Wicks and B&Q stock at least some lead. Haven't compared prices, though. -- *If you tell the truth, you don't have to remember anything.* Dave Plowman London SW To e-mail, change noise into sound. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Any creative uses for spare bits of lead flashing?! | UK diy | |||
soldering lead flashing | UK diy | |||
Lead flashing | UK diy | |||
How to fit lead flashing into brickwork? | UK diy |