Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
We have a pretty cold kitchen, particularly as it's not got central heating
in it and we've put a curtain in the open doorway to the dining room, which does have a radiator. The aim was to keep the dining room warm. The fridge part of the fridge freezer is now freezing things on a regular basis. I've replaced the thermostat, and we've put a fan heater in the kitchen as an experiment to keep it reasonably warm 24/7. Neither seems to have fixed the problem. I've tried turning the thermostat knob very slowly and cannot hear it click- even when I turn it all the way to "off" and the cabinet light goes out. I also cannot hear the compressor, though I can faintly hear the sound of coolant. I can't reliably hear the fridge switching on and off as I turn it on and off, so it seems there's some anti-cycling thing in there that's complicating matters. Obviously it works despite the silence because the thing is frozen! I'm at the point of ditching it and looking for seperate replacement fridge and freezer units that are stackable, so that in the future when we re-do the kitchen, they can un-stack. I can't seem to find any. Do they exist? The only way I've found so far is to get builtin units and get a kitchen unit that can hold both of them, one above the other. An alternative is to put a decent electronic temperature controller in there with display so I can see it's working. This should fix it but will cost around 60 quid for a cheap PID controller and power supply. And the hassle of mounting it, either as simple as a plastic box inside the fridge or going as far as cutting through the door to mount it properly in the panel. It also doesn't fix the design flaw of having a single thermostat and cooling system for both the fridge and the freezer parts so I may find that the freezer is then not cold enough. A third option is to get someone in to look at the fridge and fix it. However it will take a couple of weeks to confirm whether or not the fix has worked, and I don't like paying someone to do something when I can't tell whether it's been done or not until a considerable time after payment! Does anyone have any suggestions or comments? -- Dr. Craig Graham, Software Engineer Advanced Analysis and Integration Limited, UK. http://www.aail.co.uk/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Integrated Fridge Freezer Problem | UK diy | |||
Hotpoint Fridge Freezer | UK diy | |||
Fridge freezer - how to remove top front panel (Bosch KGV3120GB/04 UK model) | UK diy | |||
Hotpoint fridge freezer - freezer failure | UK diy | |||
Problem with Fridge Freezer | UK diy |