 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Central Heating System Balancing
I have read about a central heating system being balanced. I recently
removed all radiators to flush the gunge out of them. Whilst doing this I had to close both sides of the radiator valves. Upon rehanging the radiators I have opened fully the valve on the opposite side to the thermostatic valve, ie the water inflow to the radiator. How should these inflow valves be set as i have radiators over 3 floors with 2 on the bottom, 4 on the 1st, and 2 on the 2nd. Any advice greatly appreciated in getting the balance back. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Modification to central heating system. | UK diy | |||
| Gravity fed Central Heating System Woes | UK diy | |||
| Do I need to de-sludge my central heating system or not and inhibitor? | UK diy | |||
| Pool water in central heating system | UK diy | |||
Threaded Mode
