| Page 1 of 2 | 1 | 2 |
|
|
Printers (slightly OT)
****ed off with Ebuyer and Lexmark. At the beginning of December my
cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! |
Printers (slightly OT)
newshound wrote:
I picked up a similar looking £100 Lexmark from Ebuyer Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, Depending on the model, there are bottles of CMYK toner together with a "reset chip" on ebay ... |
Printers (slightly OT)
On 07/01/2021 22:33, newshound wrote:
****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! Try https://www.stinkyinkshop.co.uk/ They offer same day shipping if ordered before 4pm. (possibly not at weekends) -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
Printers (slightly OT)
On 07/01/2021 22:33, newshound wrote:
****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! Buy an office printer, not one made for small office/home office/john lewis/currys. The clue is in the tray capacity and number of prints in the largest cartridge, and probably slightly more costly. Brother printers have small trays, small carts - and IME costly to replace consumables. Compatible carts made a mess of one of my friend's printer, we gave up even after changing the drum. My Samsung ML-3710ND will do 10,000 5% pages before needing a change. Compatible cart cost £25, last changed Jan 2017. Printer bought in 2012 from printerland.co.uk Not a colour one though. Used to install loads of Lexmarks in Hotel reception desks. Never impressed by any of them, plastic covers too floppy - or maybe made that way to bounce when the staff trash them. Do we have a printer section in the uk.d-i-y FAQ? -- Adrian C |
Printers (slightly OT)
On 07/01/2021 22:33, newshound wrote:
****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! I have an OKI C712 which cost very little to run. Bill |
Printers (slightly OT)
After serious thinking newshound wrote :
Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. I always checked consumable costs, before committing to a purchase. You cannot beat a used ex-office laser, they sell for peanuts, are built for hard work and the consumables are silly cheap. |
Printers (slightly OT)
One word of warning though, its awfully tempting, I am told to vacuum the
spilled toner inside the printer to clean up printouts. DON'T!. Toner is low melting point plastic with a conductive additive and very very small particles. The vacuum used for this needs a special filter to stop it getting into the and seizing it and shorting it out! Brian -- This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please Note this Signature is meaningless.! "williamwright" wrote in message ... On 07/01/2021 22:33, newshound wrote: ****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! I have an OKI C712 which cost very little to run. Bill |
Printers (slightly OT)
On 08/01/2021 08:36, Harry Bloomfield wrote:
After serious thinking newshound wrote : Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. I always checked consumable costs, before committing to a purchase. You cannot beat a used ex-office laser, they sell for peanuts, are built for hard work and the consumables are silly cheap. electricity is not however -- "And if the blind lead the blind, both shall fall into the ditch". Gospel of St. Mathew 15:14 |
Printers (slightly OT)
On 07/01/2021 22:33, newshound wrote:
Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! Also beware firmware upgrades. I have a Samsung laser printer (SoHo) which I can use toner refills with, but only because I shorted out a couple of pins on a counter chip on the main board ,/and/ didn't download a firmware upgrade. That upgrade would have negated the possibility o using the pin shorting method on the chip. I happened to have a couple of old, but full, Brother toner cartridges , and have slowly been using the toner in them to refill the Samsung cartridge. -- Jeff |
Printers (slightly OT)
On 07/01/2021 23:38, Adrian Caspersz wrote:
Brother printers have small trays, small carts - and IME costly to replace consumables. Compatible carts made a mess of one of my friend's printer, we gave up even after changing the drum. Horses for courses. I have a Brother laser purchased because it has a very small footprint and fits in a small space. The toner cartridge only lasts for 1000 sheets but is £15 for a compatible replacement. I've had no problems with compatible cartridge nor with compatible inks for my Epson. My usage of the printer(s) is light. With the Brother laser I did check out the cost of consumables before purchase having been caught in the same situation as the OP 25 years ago with a beast of a HP laser -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
Printers (slightly OT)
williamwright wrote:
On 07/01/2021 22:33, newshound wrote: ****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! I have an OKI C712 which cost very little to run. But do you print anything? :-) Actually I too have an OKI, it's an MC342n "do everything" laser and works very well. It is quite big though. -- Chris Green · |
Printers (slightly OT)
In article , Harry Bloomfield wrote:
After serious thinking newshound wrote : Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. I always checked consumable costs, before committing to a purchase. You cannot beat a used ex-office laser, they sell for peanuts, are built for hard work and the consumables are silly cheap. Depends on the printer. I have an ex-office A3 colour laser - it's a wonderful workhorse, but toner s nearly £200 per colour -- from KT24 in Surrey, England "I'd rather die of exhaustion than die of boredom" Thomas Carlyle |
Printers (slightly OT)
On 08/01/2021 08:36, Harry Bloomfield wrote:
After serious thinking newshound wrote : Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. I always checked consumable costs, before committing to a purchase. You cannot beat a used ex-office laser, they sell for peanuts, are built for hard work and the consumables are silly cheap. I agree. But on a point of detail, check the weight: 'er indoors can't carry our (admittedly ancient) HP. -- Robin reply-to address is (intended to be) valid |
Printers (slightly OT)
On 07/01/2021 22:33, newshound wrote:
****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. You didn't check that third party ink cartridges were available before you bought a printer? That is *the* way to get royally ripped off. Though I confess I have done it once with the colour Dell laser printer because of its for the time almost photoreal colour reproduction. Fortunately for me the thing was so hard to assemble correctly without breaking it that huge numbers of damaged ones were available from Morgan with 3 sets of OEM cartridges for the same price as a new one. So I bought a second one from them just to get the toner cartridges. By the time they ran out aftermarket compatible toner cartridges were available. I had the original from new. I have just had to swap to the other one after the original print engine finally gave up the ghost. Colour reproduction is now nothing special by comparison with the latest generation of lasers (especially on cheap toner at £20 a set CMYK). Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. They all do it to some extent on their newest printers. They make most of their money from selling the consumables. Aftermarket toner/ink suppliers generally crack the chips within 12 a year or so. So be careful out there if you are in the market! It was ever thus. -- Regards, Martin Brown |
Printers (slightly OT)
The Natural Philosopher formulated the question :
electricity is not however All modern printers go into very low power standby, besides mine is tucked away in an upstairs bedroom and only powered up when needed via a Smart Plug. |
Printers (slightly OT)
charles wrote :
Depends on the printer. I have an ex-office A3 colour laser - it's a wonderful workhorse, but toner s nearly £200 per colour HP4000 A4 printer, with network interface. It cost me £20 many years ago. The toner finally ran low a couple of years ago, the replacement cost me £25. |
Printers (slightly OT)
Robin was thinking very hard :
I agree. But on a point of detail, check the weight: 'er indoors can't carry our (admittedly ancient) HP. Carry it, why would you want to carry it? Mine is on my network and I just print to it from any device, providing the device is somewhere on my property in range of wifi. |
Printers (slightly OT)
on 08/01/2021, Brian Gaff (Sofa) supposed :
My old hp bw laser still works countless years on with recycled carts. The integral drums do not seem to be any issue, and never had to clean the high voltage bits as you do in some of the Brothers who use a platinum wire I think. Yep, same here HP4000n |
Printers (slightly OT)
Brian Gaff (Sofa) formulated the question :
One word of warning though, its awfully tempting, I am told to vacuum the spilled toner inside the printer to clean up printouts. DON'T!. Toner is low melting point plastic with a conductive additive and very very small particles. The vacuum used for this needs a special filter to stop it getting into the and seizing it and shorting it out! I agree, much better to take it outside on a dry day and if you have an airline - blow it out, but standing upwind of it to avoid breathing in the dust. |
Printers (slightly OT)
On 07/01/2021 23:10, alan_m wrote:
On 07/01/2021 22:33, newshound wrote: ****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! Try https://www.stinkyinkshop.co.uk/ They offer same day shipping if ordered before 4pm. (possibly not at weekends) Not for B2236dw. And only genuine Lexmark cartridges, £85 for standard £125 for high capacity, for a similar model. |
Printers (slightly OT)
On 08/01/2021 11:38, Harry Bloomfield wrote:
Robin was thinking very hard : I agree.* But on a point of detail, check the weight: 'er indoors can't carry our (admittedly ancient) HP. Carry it, why would you want to carry it? Mine is on my network and I just print to it from any device, providing the device is somewhere on my property in range of wifi. In our case because it needs to be moved in order to access the boiler. I am given to understand other users have other reasons - including that they are not sluts and like to dust behind and even /underneath/ their printers. -- Robin reply-to address is (intended to be) valid |
Printers (slightly OT)
On 08/01/2021 08:36, Harry Bloomfield wrote:
After serious thinking newshound wrote : Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. I always checked consumable costs, before committing to a purchase. You cannot beat a used ex-office laser, they sell for peanuts, are built for hard work and the consumables are silly cheap. I'd stopped bothering, for mono lasers, although I do check out inkjets. I've had three ex-ofice lasers, all HP. One A3 (the duplex system eventually wore out) and two LJ5s. On one of them the "comms" board died and a replacement was more expensive than another printer, I forget what happened to the other. There don't seem to be so many around now whereas there are plenty of cheap home office models. This is the first time I have been burned. I certainly won't be buying Lexmark again (unless they turn out to be refillable, I'm waiting to see what Ebuyer say). Interestingly, I can't post a review for that model on Amazon. They say something like "There have been a lot of posts for this model and now they are only accepting reviews from verified purchasers". |
Printers (slightly OT)
On 08/01/2021 09:37, Martin Brown wrote:
On 07/01/2021 22:33, newshound wrote: ****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. You didn't check that third party ink cartridges were available before you bought a printer? That is *the* way to get royally ripped off. Hindsight is a wonderful thing. This is, I think, my fourth "soho" laser (two colour, two mono) and never had this problem before (including with the colour Lexmark). Also, I think I'll be sticking with Amazon in future. |
Printers (slightly OT)
On Friday, January 8, 2021 at 12:04:02 PM UTC, newshound wrote:
On 08/01/2021 08:36, Harry Bloomfield wrote: After serious thinking newshound wrote : Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. I always checked consumable costs, before committing to a purchase. You cannot beat a used ex-office laser, they sell for peanuts, are built for hard work and the consumables are silly cheap. I'd stopped bothering, for mono lasers, although I do check out inkjets. I've had three ex-ofice lasers, all HP. One A3 (the duplex system eventually wore out) and two LJ5s. On one of them the "comms" board died and a replacement was more expensive than another printer, I forget what happened to the other. There don't seem to be so many around now whereas there are plenty of cheap home office models. This is the first time I have been burned. I certainly won't be buying Lexmark again (unless they turn out to be refillable, I'm waiting to see what Ebuyer say). Interestingly, I can't post a review for that model on Amazon. They say something like "There have been a lot of posts for this model and now they are only accepting reviews from verified purchasers". It may not be the same 'comms card', but I have had a few instances of the network card for my Laserjet 2200 failing (P/No J169 rings a bell). These have a Ball Grid Array chip on the from the early days of BGA fabrication. There is a common fault where the BGA chip partly loses contact with the pads on the PCB. I have had some success renovating these boards with the judicious use of a hot air gun and Al foil as a heat shield. The info for this used to be on the web; I haven't had need of this in quite a few years as the J169 as currently fitted seems rock solid. I just pass this on in case it is of use. I am vaguely after a replacement for my 2200, of a similar quality and capability (duplex, network,...) J^n |
Printers (slightly OT)
On 08/01/2021 11:53, Robin wrote:
On 08/01/2021 11:38, Harry Bloomfield wrote: Robin was thinking very hard : I agree.* But on a point of detail, check the weight: 'er indoors can't carry our (admittedly ancient) HP. Carry it, why would you want to carry it? Mine is on my network and I just print to it from any device, providing the device is somewhere on my property in range of wifi. In our case because it needs to be moved in order to access the boiler. I am given to understand other users have other reasons - including that they are not sluts and like to dust behind and even /underneath/ their printers. My DW decided many many years ago that she would move her electric typewriter from one side of the office to the other. She managed to get it most of the way before running out of strength and dropping it. Her boss was really surprisingly nice about it. |
Printers (slightly OT)
On 08/01/2021 09:17, Chris Green wrote:
williamwright wrote: On 07/01/2021 22:33, newshound wrote: ****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! I have an OKI C712 which cost very little to run. But do you print anything? :-) Actually I too have an OKI, it's an MC342n "do everything" laser and works very well. It is quite big though. My Canon Pixma IP1200 is quite economical, but I only print a dozen or so pages a year :-). I get 3rd-party cartridges from 7-day shop and they seem to work OK. |
Printers (slightly OT)
On 08/01/2021 11:32, Harry Bloomfield wrote:
The Natural Philosopher formulated the question : electricity is not however All modern printers go into very low power standby, besides mine is tucked away in an upstairs bedroom and only powered up when needed via a Smart Plug. https://www.zerohedge.com/energy/bre...ergy-companies Smells fishy to me |
Printers (slightly OT)
On 08/01/2021 11:53, Robin wrote:
On 08/01/2021 11:38, Harry Bloomfield wrote: Robin was thinking very hard : I agree.* But on a point of detail, check the weight: 'er indoors can't carry our (admittedly ancient) HP. Carry it, why would you want to carry it? Mine is on my network and I just print to it from any device, providing the device is somewhere on my property in range of wifi. In our case because it needs to be moved in order to access the boiler. I am given to understand other users have other reasons - including that they are not sluts and like to dust behind and even /underneath/ their printers. But surely people only do that when upgrading software or changing consumables ?. The more you 'dust' the more dust you create and spread, surely ?. |
Printers (slightly OT)
On 08/01/2021 12:03, newshound wrote:
On 08/01/2021 08:36, Harry Bloomfield wrote: After serious thinking newshound wrote : Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. I always checked consumable costs, before committing to a purchase. You cannot beat a used ex-office laser, they sell for peanuts, are built for hard work and the consumables are silly cheap. I'd stopped bothering, for mono lasers, although I do check out inkjets. I've had three ex-ofice lasers, all HP. One A3 (the duplex system eventually wore out) and two LJ5s. On one of them the "comms" board died and a replacement was more expensive than another printer, I forget what happened to the other. There don't seem to be so many around now whereas there are plenty of cheap home office models. This is the first time I have been burned. I certainly won't be buying Lexmark again (unless they turn out to be refillable, I'm waiting to see what Ebuyer say). Interestingly, I can't post a review for that model on Amazon. They say something like "There have been a lot of posts for this model and now they are only accepting reviews from verified purchasers". https://www.youtube.com/watch?v=CSK1D3bZhRs |
Printers (slightly OT)
In article ,
Andrew wrote: On 08/01/2021 09:17, Chris Green wrote: williamwright wrote: On 07/01/2021 22:33, newshound wrote: ****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! I have an OKI C712 which cost very little to run. But do you print anything? :-) Actually I too have an OKI, it's an MC342n "do everything" laser and works very well. It is quite big though. My Canon Pixma IP1200 is quite economical, but I only print a dozen or so pages a year :-). I get 3rd-party cartridges from 7-day shop and they seem to work OK. I found that I couldn't get the colours right with replacemnt laser cartridges. Many years ago I had an inkjet printer gum up with non manufacturers' ones. That was expensive since it was a specialised device with pin-feed. So, I stick to 'originals'. -- from KT24 in Surrey, England "I'd rather die of exhaustion than die of boredom" Thomas Carlyle |
Printers (slightly OT)
On 07/01/2021 22:33, newshound wrote:
****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. Seems to me Lexmark are taking the ****, Ebuyer too. I have had a Lexmark colour laser for a couple of years and that has been fine. I must have put about ten cartridges at less than £20 a time through the Brother. And a couple of replacement "drums". I've had various HP and Dell lasers over the past 20 years or so, and never had this sort of problem before. So be careful out there if you are in the market! There is a seller on E bay USA who supplies Firmware for $10 which takes care for Chip. I will try finding his ID today. |
Printers (slightly OT)
On 08/01/2021 11:32, Harry Bloomfield wrote:
The Natural Philosopher formulated the question : electricity is not however All modern printers go into very low power standby, besides mine is tucked away in an upstairs bedroom and only powered up when needed via a Smart Plug. But a second hand office printer is [probably being sold because it is an electron gobbler -- "Socialist governments traditionally do make a financial mess. They always run out of other people's money. It's quite a characteristic of them" Margaret Thatcher |
Printers (slightly OT)
On 08/01/2021 12:14, jkn wrote:
I just pass this on in case it is of use. I am vaguely after a replacement for my 2200, of a similar quality and capability (duplex, network,...) TBH, when I looked at repairing my 2200 it was more expensive in parts than replacing it with a Laserjet Pro M402dne. Which is smaller and faster... -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Printers (slightly OT)
The Natural Philosopher submitted this idea :
But a second hand office printer is [probably being sold because it is an electron gobbler No, the biggest improvements have been in speed, not much change in the consumption department, since they were forced to reduce the standby consumption of all devices. |
Printers (slightly OT)
On 08/01/2021 12:54, The Natural Philosopher wrote:
On 08/01/2021 11:32, Harry Bloomfield wrote: The Natural Philosopher formulated the question : electricity is not however All modern printers go into very low power standby, besides mine is tucked away in an upstairs bedroom and only powered up when needed via a Smart Plug. But a second hand office printer is [probably being sold because it is an electron gobbler So don't leave it on all the time. Even our ancient HP4200 has "instant-on" fuser so there's no need to leave it on to avoid warm-up time; and we are not so far gone as to turn it off while t'other's job is actually being processed. It's not like an office with umpteen users. -- Robin reply-to address is (intended to be) valid |
Printers (slightly OT)
On 08/01/2021 12:24, GB wrote:
On 08/01/2021 11:53, Robin wrote: On 08/01/2021 11:38, Harry Bloomfield wrote: Robin was thinking very hard : I agree.* But on a point of detail, check the weight: 'er indoors can't carry our (admittedly ancient) HP. Carry it, why would you want to carry it? Mine is on my network and I just print to it from any device, providing the device is somewhere on my property in range of wifi. In our case because it needs to be moved in order to access the boiler. I am given to understand other users have other reasons - including that they are not sluts and like to dust behind and even /underneath/ their printers. My DW decided many many years ago that she would move her electric typewriter from one side of the office to the other. She managed to get it most of the way before running out of strength and dropping it. Her boss was really surprisingly nice about it. One of the secretaries where I worked complained about the weight of the IBM Selectrics when they first arrived. Procurement's advice was a classic combination of accuracy and stupidity - on the lines of "it weighs less if you remove the golfball, ribbon and correction tape." -- Robin reply-to address is (intended to be) valid |
Printers (slightly OT)
In article ,
The Natural Philosopher wrote: On 08/01/2021 11:32, Harry Bloomfield wrote: The Natural Philosopher formulated the question : electricity is not however All modern printers go into very low power standby, besides mine is tucked away in an upstairs bedroom and only powered up when needed via a Smart Plug. But a second hand office printer is [probably being sold because it is an electron gobbler more likely that everything is replaced after x years for tax purposes/ -- from KT24 in Surrey, England "I'd rather die of exhaustion than die of boredom" Thomas Carlyle |
Printers (slightly OT)
On 08/01/2021 12:08, newshound wrote:
On 08/01/2021 09:37, Martin Brown wrote: On 07/01/2021 22:33, newshound wrote: ****ed off with Ebuyer and Lexmark. At the beginning of December my cheap Brother mono laser had a toner leak inside. Changed the cartridge but still making messy prints, I was too busy to grovel around inside so I picked up a similar looking £100 Lexmark from Ebuyer (showing reasonable reviews on Amazon, but faster delivery from eBuyer). Six weeks on, the low capacity cartridge is out, at which point I find it seems to have a "chip" like inkjet ones, nothing third party available, and cartridge prices vary from £50 for 1300 pages to over £200 for 6k. And nothing with fast delivery. You didn't check that third party ink cartridges were available before you bought a printer? That is *the* way to get royally ripped off. Hindsight is a wonderful thing. This is, I think, my fourth "soho" laser (two colour, two mono) and never had this problem before (including with the colour Lexmark). Also, I think I'll be sticking with Amazon in future. I find eBuyer and Morgan both useful for bargains sometimes. YMMV -- Regards, Martin Brown |
Printers (slightly OT)
On 08/01/2021 13:39, Robin wrote:
On 08/01/2021 12:54, The Natural Philosopher wrote: On 08/01/2021 11:32, Harry Bloomfield wrote: The Natural Philosopher formulated the question : electricity is not however All modern printers go into very low power standby, besides mine is tucked away in an upstairs bedroom and only powered up when needed via a Smart Plug. But a second hand office printer is [probably being sold because it is an electron gobbler So don't leave it on all the time.Â* Even our ancient HP4200 has "instant-on" fuser so there's no need to leave it on to avoid warm-up time; and we are not so far gone as to turn it off while t'other's job is actually being processed.Â* It's not like an office with umpteen users. fair point -- Labour - a bunch of rich people convincing poor people to vote for rich people by telling poor people that "other" rich people are the reason they are poor. Peter Thompson |
| All times are GMT +1. The time now is 10:27 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter