Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Bath Taps wont fit?
we bought some new taps for the bathroom and the sink ones went in fine
(apart from struggling to get some ptfe tape on the joints up underneath the sink!). However when I came to put the bath taps in the nut on the water pipes only goes a couple of turns up the taps thread before stopping (so the pipe is loose). I dont want to force it and damage the threads, but what is wrong here? The old taps are 8 years old, and look like the same 3/4" thread when held next to the new one (pitch looks the same and thread profile appears the same), but on both hot and cold the nut only goes up a couple of turns. Any ideas before I trot off to the store tomorrow with tap in hand to find something that will fit? cheers Dave. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Old bath taps | UK diy | |||
Globe bath taps questions | UK diy | |||
Wall mounted bath taps | UK diy |