Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Extending a lighting circuit
I'm extending a lighting circuit to add a couple of wall lights on the
1st floor. I've got the cables laid from the loft down to the back boxes for the switches and outlets for the lights, and now I need to connect the new circuit to the existing lighting circuit. Is it acceptable to spur off the existing lighting circuit at the most convenient point, or are there rules to follow when deciding where to spur from? Most of the diagrams that explain how to add a lighting circuit show it coming from the last junction box / ceiling rose in the circuit. I don't know where the end of my lighting circuit is, and sods law would ensure that it's a long way away from where I want it. I don't want to be drilling or notching joists if I can avoid it. My plan is to cut a permanent live cable close to where the new lights will be and install a junction box at that point to connect the spur. I'm not sure of the exact topology of the wiring in the loft, but I'm hoping it doesn't matter. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Extending lighting cable inside a stud wall | UK diy | |||
extending cable length of low voltage lighting | UK diy | |||
extending lighting circuit | UK diy | |||
Extending socket circuit to a ring? | UK diy | |||
Extending Outdoor Mains Lighting | UK diy |