Im looking for a particular style of screw cap / cover to replace a one
or two which have got lost. They really need to match.

The style is as follows. Two parts.

One part is top hat shaped. The brim stays visible when fitted, the crown
goes into the work piece. The hole where the screw goes is filled by the
second part, which just pushes in. (I fact it is this bit which I need to
replace but I will have to buy the whole thing I am sure.)

The push in bits arent as snug as they could be and fall out. Nothing Ive
found is a good match.

Ive tried EBay etc but I cant see anything like these. The item isnt off
UK manufacture although I am trying that route.

Im hoping someone can point me to a super source of such things that
stocks such widgets and wimwams.


--
Corbyn & the EU, the Nazis next step: "Our aim was Europe a nation. Our
faith European Socialism" Mosley "My Life" autobiography 1957.

Brian Reay wrote:

One part is top hat shaped. The brim stays visible when fitted, the crown
goes into the work piece. The hole where the screw goes is filled by the
second part, which just pushes in.

The first part of these look upside-down from what you asked for, but
would they work?

https://amazon.co.uk/dp/B007OC6C04

On 17/06/2019 08:01, Andy Burns wrote:
Brian Reay wrote:

One part is top hat shaped. The brim stays visible when fitted, the crown
goes into the work piece. The hole where the screw goes is filled by the
second part, which just pushes in.

The first part of these look upside-down from what you asked for, but
would they work?

https://amazon.co.uk/dp/B007OC6C04




Thank you.

If I could find some of the correct size, they would be a reasonable
fall back for the bit that is missing but the original fits flush.

On Mon, 17 Jun 2019 18:25:33 +0100, Brian Reay wrote:

On 17/06/2019 08:01, Andy Burns wrote:
Brian Reay wrote:

One part is top hat shaped. The brim stays visible when fitted, the crown
goes into the work piece. The hole where the screw goes is filled by the
second part, which just pushes in.

The first part of these look upside-down from what you asked for, but
would they work?

https://amazon.co.uk/dp/B007OC6C04

Thank you.

If I could find some of the correct size, they would be a reasonable
fall back for the bit that is missing but the original fits flush.

Those look remarkably similar to the covers used on bike cranks when the
crank is bolted on to the BB axle. All of mine are threaded, although they
also worked well by tapping in and screwing out. Trouble is, there are holes
for the removal tool.
--
Peter.
The gods will stay away
whilst religions hold sway

On 17/06/2019 07:53, Brian Reay wrote:
Im looking for a particular style of screw cap / cover to replace a one
or two which have got lost. They really need to match.

The style is as follows. Two parts.

One part is top hat shaped. The brim stays visible when fitted, the crown
goes into the work piece. The hole where the screw goes is filled by the
second part, which just pushes in. (I fact it is this bit which I need to
replace but I will have to buy the whole thing I am sure.)

The push in bits arent as snug as they could be and fall out. Nothing Ive
found is a good match.

Ive tried EBay etc but I cant see anything like these. The item isnt off
UK manufacture although I am trying that route.

Im hoping someone can point me to a super source of such things that
stocks such widgets and wimwams.


Unfortunately, the sources I know who might do something like that only
sell in large quantities. e,g:

https://www.vital-parts.co.uk/

--
--

Colin Bignell

On Monday, June 17, 2019 at 9:31:19 AM UTC+1, Nightjar wrote:
On 17/06/2019 07:53, Brian Reay wrote:
Im looking for a particular style of screw cap / cover to replace a one
or two which have got lost. They really need to match.

The style is as follows. Two parts.

One part is top hat shaped. The brim stays visible when fitted, the crown
goes into the work piece. The hole where the screw goes is filled by the
second part, which just pushes in. (I fact it is this bit which I need to
replace but I will have to buy the whole thing I am sure.)

The push in bits arent as snug as they could be and fall out. Nothing Ive
found is a good match.

Ive tried EBay etc but I cant see anything like these.. The item isnt off
UK manufacture although I am trying that route.

Im hoping someone can point me to a super source of such things that
stocks such widgets and wimwams.


Unfortunately, the sources I know who might do something like that only
sell in large quantities. e,g:

https://www.vital-parts.co.uk/

--
--

Colin Bignell

Have you tried Pinterest ?

I find major suppliers will generally send a few samples f.o.c.if you are regitered with them

Nightjar Wrote in message:
On 17/06/2019 07:53, Brian Reay wrote:
I?m looking for a particular style of screw cap / cover to replace a one
or two which have got lost. They really need to match.

The style is as follows. Two parts.

One part is top hat shaped. The brim stays visible when fitted, the crown
goes into the work piece. The hole where the screw goes is filled by the
second part, which just pushes in. (I fact it is this bit which I need to
replace but I will have to buy the whole thing I am sure.)

The push in bits aren?t as snug as they could be and fall out. Nothing I?ve
found is a good match.

I?ve tried EBay etc but I can?t see anything like these. The item isn?t off
UK manufacture although I am trying that route.

I?m hoping someone can point me to a super source of such things that
stocks such widgets and wimwams.


Unfortunately, the sources I know who might do something like that only
sell in large quantities. e,g:

https://www.vital-parts.co.uk/


Ask for some samples?
--
Jim K


----Android NewsGroup Reader----
http://usenet.sinaapp.com/

On 17/06/2019 09:31, Nightjar wrote:
On 17/06/2019 07:53, Brian Reay wrote:
Im looking for a particular style of screw cap / coverÂ* to replace a one
or two which have got lost. They really need to match.

The style is as follows.Â* Two parts.

One part is top hat shaped. The brim stays visible when fitted, the crown
goes into the work piece. The hole where the screw goes is filled by the
second part, which just pushes in. (I fact it is this bit which I need to
replace but I will have to buy the whole thing I am sure.)

The push in bits arent as snug as they could be and fall out. Nothing
Ive
found is a good match.

Ive tried EBay etc but I cant see anything like these. The item
isnt off
UK manufacture although I am trying that route.

Im hoping someone can point me to a super source of such things that
stocks such widgets and wimwams.


Unfortunately, the sources I know who might do something like that only
sell in large quantities. e,g:

https://www.vital-parts.co.uk/




Thank you- what a fascinating collection of wimwams ;-)

I've had an initial look- no joy yet but I will make a detailed search.

On 17/06/2019 07:53, Brian Reay wrote:
Im looking for a particular style of screw cap / cover to replace a one
or two which have got lost. They really need to match.

The style is as follows. Two parts.

One part is top hat shaped. The brim stays visible when fitted, the crown
goes into the work piece. The hole where the screw goes is filled by the
second part, which just pushes in. (I fact it is this bit which I need to
replace but I will have to buy the whole thing I am sure.)

The push in bits arent as snug as they could be and fall out. Nothing Ive
found is a good match.

Ive tried EBay etc but I cant see anything like these. The item isnt off
UK manufacture although I am trying that route.

Im hoping someone can point me to a super source of such things that
stocks such widgets and wimwams.



Mirror screw fixings? They come with a domed head and a parallel sided
round head.

--
mailto : news {at} admac {dot} myzen {dot} co {dot} uk