Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]()
Hello,
We have just finished building the roof on our extension and now need to get it tiled. I was hoping to match the existing tiles as closely as possible, ignoring nearly 40 years of weathering. I was under the impression that the original roof was done in Marley tiles, but when I took one of them to my builders merchant I found similar designs but nothing was a close match. Looking at the first tile, I couldn't make out the makers name but after careful studying of several tiles I now believe it to be 'Dinorwic'. I now know that the Dinorwic slate company went out of business in 1969 and I assume they tried to compete in the tile market before going under. The tiles I am looking for are smaller then most nowadays, being 15"x9" and have a similar profile to the 'double-roman' tile which most modern manufacturers produce. They are greyish in colour. Can anyone suggest whre I might source a similar tile, even if I cannot find anything by the original manufacturer. On the positive side, there is a valley separating the original roof from the newly built extension roof so it is not imperative that the new tiles match exactly as long as the combination of old and new looks reasonable. It is also worth noting that the house is a semi-detached so I cannot simply replace all of the tiles without significant problems tying in to the tiles on the neighbours side. Finally, I live in Chorley in the north-west, between Preston and Bolton. Any help/advice is appreciated. Thanks. |
#2
![]() |
|||
|
|||
![]()
Kevin wrote:
Any help/advice is appreciated. Thanks. Why not see if there is a local reclaimation yard? You may be able to get the exact tile already weathered! -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#3
![]() |
|||
|
|||
![]()
John Rumm wrote in message ...
Kevin wrote: Any help/advice is appreciated. Thanks. Why not see if there is a local reclaimation yard? You may be able to get the exact tile already weathered! Absolutely... the likelihood is that whatever tiles you have were in widespread use locally when new, so there's a good chance you'll find some. Well worth it IMO - we used reclaimed tiles when we extended our 1913 semi about 3 years ago, and now you really can't even see the join! David |
#4
![]() |
|||
|
|||
![]() "Kevin" wrote in message om... Hello, We have just finished building the roof on our extension and now need to get it tiled. I was hoping to match the existing tiles as closely as possible, ignoring nearly 40 years of weathering. I was under the impression that the original roof was done in Marley tiles, but when I took one of them to my builders merchant I found similar designs but nothing was a close match. Looking at the first tile, I couldn't make out the makers name but after careful studying of several tiles I now believe it to be 'Dinorwic'. I now know that the Dinorwic slate company went out of business in 1969 and I assume they tried to compete in the tile market before going under. The tiles I am looking for are smaller then most nowadays, being 15"x9" and have a similar profile to the 'double-roman' tile which most modern manufacturers produce. They are greyish in colour. Can anyone suggest whre I might source a similar tile, even if I cannot find anything by the original manufacturer. On the positive side, there is a valley separating the original roof from the newly built extension roof so it is not imperative that the new tiles match exactly as long as the combination of old and new looks reasonable. It is also worth noting that the house is a semi-detached so I cannot simply replace all of the tiles without significant problems tying in to the tiles on the neighbours side. Finally, I live in Chorley in the north-west, between Preston and Bolton. Any help/advice is appreciated. Thanks. Could you strip the roof of the house at the front, and re-tile the back with the removed tiles on both the extension and house, and use a close match at the front so the new and old are not next to each other ? Seen it done several times to get a good match of weathering. Andrew Mawson |
#5
![]() |
|||
|
|||
![]()
Kevin,
There's a big reclamation place behind Matalan at Bamber Bridge. I've walked down the footpath at the side of it many times and they seem to have loads of old building materials. Antony "Kevin" wrote in message om... Hello, We have just finished building the roof on our extension and now need to get it tiled. I was hoping to match the existing tiles as closely as possible, ignoring nearly 40 years of weathering. I was under the impression that the original roof was done in Marley tiles, but when I took one of them to my builders merchant I found similar designs but nothing was a close match. Looking at the first tile, I couldn't make out the makers name but after careful studying of several tiles I now believe it to be 'Dinorwic'. I now know that the Dinorwic slate company went out of business in 1969 and I assume they tried to compete in the tile market before going under. The tiles I am looking for are smaller then most nowadays, being 15"x9" and have a similar profile to the 'double-roman' tile which most modern manufacturers produce. They are greyish in colour. Can anyone suggest whre I might source a similar tile, even if I cannot find anything by the original manufacturer. On the positive side, there is a valley separating the original roof from the newly built extension roof so it is not imperative that the new tiles match exactly as long as the combination of old and new looks reasonable. It is also worth noting that the house is a semi-detached so I cannot simply replace all of the tiles without significant problems tying in to the tiles on the neighbours side. Finally, I live in Chorley in the north-west, between Preston and Bolton. Any help/advice is appreciated. Thanks. |
#6
![]() |
|||
|
|||
![]()
There's a big reclamation place behind Matalan at Bamber Bridge. I've walked
down the footpath at the side of it many times and they seem to have loads of old building materials. Thanks Anthony, I'll check this out as soon as I can. |
#7
![]() |
|||
|
|||
![]() "Kevin" wrote in message om... Hello, We have just finished building the roof on our extension and now need to get it tiled. I was hoping to match the existing tiles as closely as possible, ignoring nearly 40 years of weathering. I was under the impression that the original roof was done in Marley tiles, but when I took one of them to my builders merchant I found similar designs but nothing was a close match. Looking at the first tile, I couldn't make out the makers name but after careful studying of several tiles I now believe it to be 'Dinorwic'. I now know that the Dinorwic slate company went out of business in 1969 and I assume they tried to compete in the tile market before going under. The tiles I am looking for are smaller then most nowadays, being 15"x9" and have a similar profile to the 'double-roman' tile which most modern manufacturers produce. They are greyish in colour. Can anyone suggest whre I might source a similar tile, even if I cannot find anything by the original manufacturer. On the positive side, there is a valley separating the original roof from the newly built extension roof so it is not imperative that the new tiles match exactly as long as the combination of old and new looks reasonable. It is also worth noting that the house is a semi-detached so I cannot simply replace all of the tiles without significant problems tying in to the tiles on the neighbours side. Finally, I live in Chorley in the north-west, between Preston and Bolton. If you go to your roofing suppliers they should be able to point you to a reclamation yard. roofers are paid a bonus or commission for stripping old slates off for reclamation. rob |
#8
![]() |
|||
|
|||
![]()
For anyone who may be interested, I have managed to find a supply of
reclaimed tiles to match my existing roof. They come from a company called Clydesdale roofing supplies who seem to have a number of outlets around the north-west. They normally deal in new materials but seem to keep a small stock of reclaimed tiles. Unfortunately I am having to pay a little more than I would for new tiles (£1 +vat per tile) but having rung around a few places, everyone agrees this is a realistic price given the difficulty finding them. Thanks for all the help/advice. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Pitch and gravel roof? | UK diy |