Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
40mm pushfit
OK probably dumb question. I've been replacing fitting the utility room
waste with 40mm pipe and compression joints, but one spot I need a 135 degree pushfit. Got one off Ebay advertised 40mm but it's stamped '1.5" / 38mm" and I can't get it on the pipe. Should it fit? Those 2mm make all the difference - I've tried chamfering the edges but it won't go. I thought all 40mm solvent weld/compression/pushfit pipe and fittings were pretty much interchangeable. -- Reentrant |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
40mm waste steep gradient required. | UK diy | |||
can't figure out how to cut 40mm plastic pipe | UK diy | |||
40mm Worktop cutting... reccomend a jigsaw? | UK diy | |||
Chromed bottle trap - 40mm - ??? | UK diy | |||
Converting soil pipe access panel to allow 40mm pipe | UK diy |