Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Part P like-for-like replacement
On 27/01/2019 10:50, Scott wrote:
On Sat, 26 Jan 2019 17:51:57 +0000 (GMT+00:00), "Jim K.." wrote: Wrote in message: On Saturday, 26 January 2019 16:25:34 UTC, Jeff Layman wrote: So what about using a simple IP65-rated downlighter with mains GU10 bulb, and mains cabling to replace the low voltage cable (all in the loft)? I can't believe that is considered like-for like. Or is it? Well, if you take the old wiring out, no-one will be able to say what was there before, will they? Owain True enough :-) My problem now is that the main wiring is old colours. Unless I can get hold of red and black cable (which seems to be impossible) it is a bit obvious where the modifications have taken place. Not really. New colours were permitted before part P was introduced, and old colours were still permitted after it... (add to that that no one gives a flying feck anyway!) -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Like-for-Like Drive Replacement - the Rules | UK diy | |||
Back boiler - like-for-like replacement? | UK diy | |||
New Boiler = Room Stat = Part 'P' & Part 'L' question (long) | UK diy | |||
Part needed: Kenwood Car Radio KDC-MP625 part needed | Electronics Repair | |||
Sourcing a Part L compliant part glazed stable door | UK diy |