| Page 1 of 2 | 1 | 2 |
|
|
need to power cycle modem remotely
Like a lot of other people with CCTV that can be viewed over the
internet, I need to remotely power cycle the modem now and then. Ideas? Bill |
need to power cycle modem remotely
On 2019-01-27 1:02 p.m., Bill Wright wrote:
Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill first figure out what you're trying to say |
need to power cycle modem remotely
Like a lot of other people with CCTV that can be viewed over the
internet, I need to remotely power cycle the modem now and then. Ideas? Bill Consider changing you router for a more reliable one. Consider changing your ISP for a more reliable one. Power your router from a cheap time-switch that power cycles it at 3am whether it's needed or not. -- Graham. %Profound_observation% |
need to power cycle modem remotely
"Bill Wright" wrote in message ... Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? There are plenty of remote switches now. https://www.evehome.com/en/eve-energy |
need to power cycle modem remotely
On Sun, 27 Jan 2019 20:02:45 +0000, Bill Wright wrote:
Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? USB operated relays are readily available, and they handle mains. Or use one of the SONOFF switches - see eBay - that work from an app (can be hacked to have a webserver instead). -- My posts are my copyright and if @diy_forums or Home Owners' Hub wish to copy them they can pay me £1 a message. Use the BIG mirror service in the UK: http://www.mirrorservice.org *lightning surge protection* - a w_tom conductor |
need to power cycle modem remotely
On 27/01/2019 20:02, Bill Wright wrote:
Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill time switch wifi socket |
need to power cycle modem remotely
Bob Eager wrote:
Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? USB operated relays are readily available, and they handle mains. Or use one of the SONOFF switches - see eBay - that work from an app (can be hacked to have a webserver instead). Presumably the need to reboot the modem is because the internet connection is up the spout when Bill wants to view his CCTV from afar? So something that can reboot the modem e.g. via SMS would be more helpful? |
Lonely Psychotic Senile Ozzie Troll Alert! LOL
On Mon, 28 Jan 2019 07:17:24 +1100, cantankerous trolling geezer Rot Speed,
the auto-contradicting senile sociopath, blabbered, again: There are plenty of remote switches now. https://www.evehome.com/en/eve-energy Somebody needs to switch off YOU, you abnormal nym-shifting 85-year-old senile cretin! -- Richard addressing Rot Speed: "**** you're thick/pathetic excuse for a troll." MID: |
need to power cycle modem remotely
On Sun, 27 Jan 2019 20:02:45 +0000, Bill Wright wrote:
I need to remotely power cycle the modem now and then. Why? If it's fallen over and lost the link you won't be able to remotely do anything. If a bad line or noise has knocked the speed down ADSL2+ recovers quite quickly on it's own (unlike ADSL which can take up to 72 hours). If the modem and/or DSLAM has got it's knickers in a twist over the required signal to noise level a reboot won't affect that. You need to start the 10 day training period, this instruction has to come from your ISP most like as a result of you calling/emailing support or via a webpage on your account details. The last is the only one that occurs here. The modem stays up until either there is a power cut long enough for the UPS to flatten it's batteries or I switch it off to do "maintenance". Personally I'd VPN into the home network and access the devices web interface over that to restart the link or reboot the device. Then sit nervously waiting for it to come back up... -- Cheers Dave. |
need to power cycle modem remotely
On 27/01/2019 21:27, dennis@home wrote:
On 27/01/2019 20:02, Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill time switch wifi socket Get into the admin screen remotely and reset from there. All my routers/modems have had reset option in the admin menus. Examples https://kb.netgear.com/976/Enabling-...ote-management http://www.tplink.cl/support/showfaqc5b2.html?id=66 -- mailto : news {at} admac {dot} myzen {dot} co {dot} uk |
need to power cycle modem remotely
On 27/01/2019 21:55, Andy Burns wrote:
Bob Eager wrote: Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? USB operated relays are readily available, and they handle mains. Or use one of the SONOFF switches - see eBay - that work from an app (can be hacked to have a webserver instead). Presumably the need to reboot the modem is because the internet connection is up the spout when Bill wants to view his CCTV from afar? So something that can reboot the modem e.g. via SMS would be more helpful? Stick a Raspberry Pi with a relay onto the network. Ping an outside address once every minute and if nothing is returned for 5 consecutive minutes, use the relay to power cycle the modem/router. SteveW |
need to power cycle modem remotely
Bill Wright expressed precisely :
Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill A modem with OpenWRT installed as the firmware, will allow the router to be set to reboot as frequently as you like - hourly, daily, weekly, or at set times and several times a day. |
need to power cycle modem remotely
mains switched outlet controlled by mobile phone?
Brian -- ----- -- This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please Note this Signature is meaningless.! "Bill Wright" wrote in message ... Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill |
need to power cycle modem remotely
Nothing to stop him having two routers though one for the normal stuff and
one that can be power cycled on over the web from a phone. I'm sure I've seen this done. Brian -- ----- -- This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please Note this Signature is meaningless.! "Graham." wrote in message ... Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill Consider changing you router for a more reliable one. Consider changing your ISP for a more reliable one. Power your router from a cheap time-switch that power cycles it at 3am whether it's needed or not. -- Graham. %Profound_observation% |
need to power cycle modem remotely
On 27/01/2019 20:02, Bill Wright wrote:
Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill long piece of string? -- The ultimate result of shielding men from the effects of folly is to fill the world with fools. Herbert Spencer |
need to power cycle modem remotely
Tim+ wrote:
https://rover.ebay.com/rover/0/0/0?m...%2Fwww.ebay.co. uk%2Fulk%2Fitm%2F401456564967 With built-in "deathdapter" [TM]BigClive These look safer, but stupidly priced. https://www.isocket.eu/remote-power-on-off-reboot |
need to power cycle modem remotely
On 27/01/2019 22:53, Steve Walker wrote:
On 27/01/2019 21:55, Andy Burns wrote: Bob Eager wrote: Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? USB operated relays are readily available, and they handle mains. Or use one of the SONOFF switches - see eBay - that work from an app (can be hacked to have a webserver instead). Presumably the need to reboot the modem is because the internet connection is up the spout when Bill wants to view his CCTV from afar? So something that can reboot the modem e.g. via SMS would be more helpful? Stick a Raspberry Pi with a relay onto the network. Ping an outside address once every minute and* if nothing is returned for 5 consecutive minutes, use the relay to power cycle the modem/router. That is a good answer. Heartbeats are a reliable technique to ensure server availability. The thing that wasn't obvious to me is the relay mains switch, easy to wire it up, but I don't know how to enclose it safely. I can do a home made box and sticky tape but is there anything more professional? Even the ready made wifi devices like Sonoff are not something I would want lying around, in the open, if they were using main power. |
need to power cycle modem remotely
On 27/01/2019 20:04, % wrote:
On 2019-01-27 1:02 p.m., Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill first figure out what you're trying to say Just for you, here's a clarification: **** off. Bill |
need to power cycle modem remotely
On 27/01/2019 20:16, Graham. wrote:
Consider changing you router for a more reliable one. How do I know which is more reliable? How do I know the problem is with the router? Consider changing your ISP for a more reliable one. How do I know which is more reliable? How do I know the problem is with the ISP? Power your router from a cheap time-switch that power cycles it at 3am whether it's needed or not. That would work, but ideally I need to power cycle it as soon as it stops working. Bill |
need to power cycle modem remotely
On 28/01/2019 10:12, Andy Burns wrote:
Tim+ wrote: https://rover.ebay.com/rover/0/0/0?m...%2Fwww.ebay.co. uk%2Fulk%2Fitm%2F401456564967 With built-in "deathdapter" [TM]BigClive These look safer, but stupidly priced. https://www.isocket.eu/remote-power-on-off-reboot That looks very promising. Bill |
need to power cycle modem remotely
On 27/01/2019 20:02, Bill Wright wrote:
Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Every time you re-boot your modem it has to go through the re-training. There must be a reason for failing. I had an issue for many years and eventually tied it down to the Draytek router was randomly dropping my main ZEN connection and switching to Plusnet on failover. Took a re-boot to get Zen back up again. Only found out that the router was the cause when I plugged an old, suspected to be faulty router in while waiting for a replacement to arrive and everything just worked. Nothing's fallen over or needed re-booting for a good 6 months now. I'd replace modem first as they're cheap as chips and then replace router if you still have issues. Always good to have a spare router pre-configured for hot-swap diagnostics. |
need to power cycle modem remotely
In article ,
Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Could your problem be caused by sudden dips in the mains voltage (brown outs)? I often used to find that my modem needed a power reset in the morning. I bought a UPS and fed the modem from that - problem solved. -- from KT24 in Surrey, England "I'd rather die of exhaustion than die of boredom" Thomas Carlyle |
need to power cycle modem remotely
On 27/01/2019 20:49, Bob Eager wrote:
On Sun, 27 Jan 2019 20:02:45 +0000, Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? USB operated relays are readily available, and they handle mains. Or use one of the SONOFF switches - see eBay - that work from an app (can be hacked to have a webserver instead). Sonoff would be good, hack it to ping an external site and turn off and on if it can't ping to reset the router. |
need to power cycle modem remotely
On 28/01/2019 14:59, dennis@home wrote:
On 27/01/2019 20:49, Bob Eager wrote: On Sun, 27 Jan 2019 20:02:45 +0000, Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? USB operated relays are readily available, and they handle mains. Or use one of the SONOFF switches - see eBay - that work from an app (can be hacked to have a webserver instead). Sonoff would be good, hack it to ping an external site and turn off and on if it can't ping to reset the router. https://gist.github.com/ItKindaWorks...a1ffcc947babf7 |
need to power cycle modem remotely
On 28/01/2019 10:13, Jethro_uk wrote:
On Sun, 27 Jan 2019 20:02:45 +0000, Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill Do you need to reboot at will, or are you finding that long periods without use lead to something "jamming up" ? I had the latter problem with a WiFi HP scanner/printer - it really didn't like being left alone for long periods, and went into a "power save" mode, which anecdata from the internet suggested was code for "off". Rather than dick about trawling loads of half-posts everywhere (most of which suggested it wasn't fixable) I just put a mechanical segment timer on it, and it power cycles around 3am every day. Been fine for a few months now. These wireless doo-dahs are all very well, but I have to admit, I'm loath to trust them. Err, if you are going to do that, it will then go through its power up test and nozzle cleaning routine. In which case, why not just switch it off when you aren't using it ?. |
need to power cycle modem remotely
On 28/01/2019 13:42, charles wrote:
In article , Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Could your problem be caused by sudden dips in the mains voltage (brown outs)? I often used to find that my modem needed a power reset in the morning. I bought a UPS and fed the modem from that - problem solved. +1 I run my fridge with a Smiths electronic timer since the electro-mech. thermostat failed (don't ask). Every 3 to 4 days all the settings would be lost and it would not run. The time that this event occurred was randomly through the day, sometimes occurring many hours before I realised. Eventually I plugged the Smiths timer into an ex BT surge protector that came out of a redundant exchange. It has never lost its settings since. Quite what this surge protector is filtering out I cannot say. Would other peoples baby alarms or mains ethernet adapters affect it ?. My Smiths electronic immersion heater timer never loses its settings but it is UK made, while the 3-pin plug in variety is Chinese. |
need to power cycle modem remotely
On Mon, 28 Jan 2019 11:52:53 +0000
Bill Wright wrote: On 27/01/2019 20:16, Graham. wrote: Consider changing you router for a more reliable one. How do I know which is more reliable? How do I know the problem is with the router? Consider changing your ISP for a more reliable one. How do I know which is more reliable? How do I know the problem is with the ISP? Power your router from a cheap time-switch that power cycles it at 3am whether it's needed or not. That would work, but ideally I need to power cycle it as soon as it stops working. Ah, that seems easy - get a small computer (Raspberry Pi Zero) to ping somewhere reliable like google.com, and if it fails for a few minutes at a time it can operate a relay to interrupt power to the modem. |
need to power cycle modem remotely
On 28/01/2019 11:50, Bill Wright wrote:
On 27/01/2019 20:04, % wrote: On 2019-01-27 1:02 p.m., Bill Wright wrote: Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill first figure out what you're trying to say Just for you, here's a clarification: **** off. Bill +1 |
need to power cycle modem remotely
On 28/01/2019 16:57, Rob Morley wrote:
On Mon, 28 Jan 2019 11:52:53 +0000 Bill Wright wrote: On 27/01/2019 20:16, Graham. wrote: Consider changing you router for a more reliable one. How do I know which is more reliable? How do I know the problem is with the router? Consider changing your ISP for a more reliable one. How do I know which is more reliable? How do I know the problem is with the ISP? Power your router from a cheap time-switch that power cycles it at 3am whether it's needed or not. That would work, but ideally I need to power cycle it as soon as it stops working. Ah, that seems easy - get a small computer (Raspberry Pi Zero) to ping somewhere reliable like google.com, and if it fails for a few minutes at a time it can operate a relay to interrupt power to the modem. https://youtu.be/boMHq9PBy9M https://www.ebay.co.uk/itm/Sonoff-S2...E/263808543030 |
need to power cycle modem remotely
Rob Morley wrote:
get a small computer (Raspberry Pi Zero) to ping somewhere reliable like google.com, and if it fails for a few minutes at a time it can operate a relay to interrupt power to the modem. And that will generally only need to be a 12V relay, not mains. |
need to power cycle modem remotely
"Harry Bloomfield" wrote in message ... Bill Wright expressed precisely : Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill A modem with OpenWRT installed as the firmware, will allow the router to be set to reboot as frequently as you like - hourly, daily, weekly, or at set times and several times a day. But that wont work if its gone flat on its face and needs to be rebooted for that reason. |
need to power cycle modem remotely
"Andy Burns" wrote in message ... Tim+ wrote: https://rover.ebay.com/rover/0/0/0?m... 401456564967 With built-in "deathdapter" [TM]BigClive No deathdapter involved. These look safer, but stupidly priced. https://www.isocket.eu/remote-power-on-off-reboot |
More Heavy Trolling by Senile Nym-Shifting Rot Speed!
On Tue, 29 Jan 2019 06:47:29 +1100, 2987fr, better known as cantankerous
trolling senile geezer Rot Speed, wrote: A modem with OpenWRT installed as the firmware, will allow the router to be set to reboot as frequently as you like - hourly, daily, weekly, or at set times and several times a day. But that wont work if its gone flat on its face and needs to be rebooted for that reason. LOL! In auto-contradicting mode again, you abnormal senile cretin? -- Kerr-Mudd,John addressing senile Rot: "Auto-contradictor Rod is back! (in the KF)" MID: |
need to power cycle modem remotely
2987fr wrote:
Tim+ wrote: https://rover.ebay.com/rover/0/0/0?m... 401456564967 No deathdapter involved. He's behind you ... |
need to power cycle modem remotely
On Mon, 28 Jan 2019 18:22:51 +0000
Andy Burns wrote: Rob Morley wrote: get a small computer (Raspberry Pi Zero) to ping somewhere reliable like google.com, and if it fails for a few minutes at a time it can operate a relay to interrupt power to the modem. And that will generally only need to be a 12V relay, not mains. That's a good point I hadn't considered, but worthwhile if the user is concerned about remotely (and blindly) switching mains voltage. |
need to power cycle modem remotely
On Mon, 28 Jan 2019 17:14:38 +0000
"dennis@home" wrote: On 28/01/2019 16:57, Rob Morley wrote: Ah, that seems easy - get a small computer (Raspberry Pi Zero) to ping somewhere reliable like google.com, and if it fails for a few minutes at a time it can operate a relay to interrupt power to the modem. https://youtu.be/boMHq9PBy9M https://www.ebay.co.uk/itm/Sonoff-S2...E/263808543030 But if I were to take that path I already have a spare ESP8266 with on-board relay, and a few power supplies kicking around. I think I have an original RPi Zero somewhere too - I'd rather used wired networking for this job. |
need to power cycle modem remotely
On Sunday, January 27, 2019 at 8:02:47 PM UTC, Bill Wright wrote:
Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill Have you tried a new wallwart (if that's what powers it)? I find that the light-weight switch mode ones tend to go flakey after a while. In the case of my modem the symptom is that LAN connections between local computers etc. work fine but the internet connection keeps dropping out. My theory is that the modem needs the full 12v which the PSU struggles to provide but the router portion drops it to 5V through a stabiliser. Chris |
need to power cycle modem remotely
On 27/01/2019 22:34, Dave Liquorice wrote:
On Sun, 27 Jan 2019 20:02:45 +0000, Bill Wright wrote: I need to remotely power cycle the modem now and then. Why? If it's fallen over and lost the link you won't be able to remotely do anything. But a local device running if this then that could when no longer able to ping the outside world force power cycling of the router. https://www.amazon.co.uk/Belkin-F7C0...dp/B009SA9Z6S/ Other brands are available. If a bad line or noise has knocked the speed down ADSL2+ recovers quite quickly on it's own (unlike ADSL which can take up to 72 hours). If the modem and/or DSLAM has got it's knickers in a twist over the required signal to noise level a reboot won't affect that. You need to start the 10 day training period, this instruction has to come from your ISP most like as a result of you calling/emailing support or via a webpage on your account details. From time to time I have found mine gets into a state where the noise margin in one direction is "0" but it still thinks it has valid sync. It is a bit annoying that the error seconds visibly count up in realtime but the thing isn't smart enough to reboot itself. My line does have some issues being a rural overhead one with trees and an underground section that is quite often flooded. The last is the only one that occurs here. The modem stays up until either there is a power cut long enough for the UPS to flatten it's batteries or I switch it off to do "maintenance". Personally I'd VPN into the home network and access the devices web interface over that to restart the link or reboot the device. Then sit nervously waiting for it to come back up... That won't work if the outside world has vanished. The reason for wanting to do it is that the router has stopped routing. A crude time clock to cycle the power at 1am is the cheapest option. -- Regards, Martin Brown |
need to power cycle modem remotely
In article , Graham.
scribeth thus Like a lot of other people with CCTV that can be viewed over the internet, I need to remotely power cycle the modem now and then. Ideas? Bill Consider changing you router for a more reliable one. Consider changing your ISP for a more reliable one. Power your router from a cheap time-switch that power cycles it at 3am whether it's needed or not. Some routers have that built in but if your need is now then use one of these. We use them to remote control some equipment they work as; Ring line - unit answers - enter access code - unit blips "go ahead" and then use *1# to turn relay One on, and *2# relay Two on etc. and use #1# 2,3,4 to turn each relay off, all can be set to on or off at once. Works very well indeed. Thats the 4 way one, they do it seems supply single ones now. https://quasarelectronics.co.uk/Cate...les-telephone- activated-relay-board-switches -- Tony Sayer |
need to power cycle modem remotely
In article 20190128165722.46e72de5@Mars, Rob Morley
scribeth thus On Mon, 28 Jan 2019 11:52:53 +0000 Bill Wright wrote: On 27/01/2019 20:16, Graham. wrote: Consider changing you router for a more reliable one. How do I know which is more reliable? How do I know the problem is with the router? Consider changing your ISP for a more reliable one. How do I know which is more reliable? How do I know the problem is with the ISP? Power your router from a cheap time-switch that power cycles it at 3am whether it's needed or not. That would work, but ideally I need to power cycle it as soon as it stops working. Ah, that seems easy - get a small computer (Raspberry Pi Zero) to ping somewhere reliable like google.com, and if it fails for a few minutes at a time it can operate a relay to interrupt power to the modem. Thats if the bloody Pi stays up !... -- Tony Sayer |
| All times are GMT +1. The time now is 06:51 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2004 - 2014 DIYbanter