Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
I've not used Superglue very much but recently have found it useful for a couple of jobs.
The problem is that it's so liquid it tends to run all over the place and you get into problems of gluing your fingers to things you didn't intend to (not that I sometimes intend to glue my fingers but you know what I mean!) I'm going to try the gel version but my question is, does the gel version just not flow around so much or does it also have an ability to fill small gaps? |
#2
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Murmansk Wrote in message:
I've not used Superglue very much but recently have found it useful for a couple of jobs. The problem is that it's so liquid it tends to run all over the place and you get into problems of gluing your fingers to things you didn't intend to (not that I sometimes intend to glue my fingers but you know what I mean!) I'm going to try the gel version but my question is, does the gel version just not flow around so much or does it also have an ability to fill small gaps? I like HV superglue (Toolsatan et al) get a tin of aerosol activator too. -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#3
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
What's aerosol activator?
I thought moisture was what activated superglue. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Jim K.. presented the following explanation :
I like HV superglue (Toolsatan et al) get a tin of aerosol activator too. A little moisture helps superglue set up fast I find. |
#5
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On Tue, 1 Jan 2019 10:21:00 -0800 (PST), Murmansk wrote:
I've not used Superglue very much but recently have found it useful for a couple of jobs. The problem is that it's so liquid it tends to run all over the place and you get into problems of gluing your fingers to things you didn't intend to (not that I sometimes intend to glue my fingers but you know what I mean!) I'm going to try the gel version but my question is, does the gel version just not flow around so much or does it also have an ability to fill small gaps? Not so much filling ability. Try this: (baking soda as filler and accelerator, needs liquid runny superglue) https://www.instructables.com/id/Super-Glue-Accelerator-and-Filler/ Thomas Prufer |
#6
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 01/01/2019 18:21, Murmansk wrote:
I've not used Superglue very much but recently have found it useful for a couple of jobs. The problem is that it's so liquid it tends to run all over the place and you get into problems of gluing your fingers to things you didn't intend to (not that I sometimes intend to glue my fingers but you know what I mean!) Acetone is a reliable and effective solvent for superglue. It is hard to get as its handy for making various illegal drugs, but try. I'm going to try the gel version but my question is, does the gel version just not flow around so much or does it also have an ability to fill small gaps? Thicker stuff will fill small gaps. For serious gap filling google superglue and baking powder. -- In a Time of Universal Deceit, Telling the Truth Is a Revolutionary Act. - George Orwell |
#7
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 01/01/2019 18:43, Murmansk wrote:
What's aerosol activator? I thought moisture was what activated superglue. it's one thing that works. There are others -- €œSome people like to travel by train because it combines the slowness of a car with the cramped public exposure of €¨an airplane.€ Dennis Miller |
#8
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Harry Bloomfield Wrote in message:
Jim K.. presented the following explanation : I like HV superglue (Toolsatan et al) get a tin of aerosol activator too. A little moisture helps superglue set up fast I find. Have you tried an activator? -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#9
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Murmansk Wrote in message:
What's aerosol activator? I thought moisture was what activated superglue. Toolsatan search.... -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#10
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 01/01/2019 18:43, Murmansk wrote:
What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#11
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 01/01/2019 19:23, The Natural Philosopher wrote:
On 01/01/2019 18:21, Murmansk wrote: I've not used Superglue very much but recently have found it useful for a couple of jobs. The problem is that it's so liquid it tends to run all over the place and you get into problems of gluing your fingers to things you didn't intend to (not that I sometimes intend to glue my fingers but you know what I mean!) Acetone is a reliable and effective solvent for superglue. It is hard to get as its handy for making various illegal drugs, but try. A half litre aerosol of "foam cleaner" from TS etc... Basically pure acetone. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#12
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
John Rumm Wrote in message:
On 01/01/2019 18:43, Murmansk wrote: What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. Or apply glue to one half of the joint, dust the other part with the activator spray THEN bring both together & count to ?5? -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#13
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Jim K.. explained :
Have you tried an activator? -- No, I have never found the need. If I need a fast set, I spray with water. |
#14
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On Tuesday, 1 January 2019 18:21:03 UTC, Murmansk wrote:
I've not used Superglue very much but recently have found it useful for a couple of jobs. The problem is that it's so liquid it tends to run all over the place and you get into problems of gluing your fingers to things you didn't intend to (not that I sometimes intend to glue my fingers but you know what I mean!) I'm going to try the gel version but my question is, does the gel version just not flow around so much or does it also have an ability to fill small gaps? Liquid fills small gaps IME. Baking soda then superglue is good for bigger gaps. NT |
#15
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Harry Bloomfield Wrote in message:
Jim K.. explained : Have you tried an activator? -- No, I have never found the need. If I need a fast set, I spray with water. Much faster than water... Still, what you won't try you won't miss ;-) -- Jim K ----Android NewsGroup Reader---- http://usenet.sinaapp.com/ |
#16
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Tim Streater wrote:
In article , John Rumm wrote: On 01/01/2019 18:43, Murmansk wrote: What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. Or, if you got it wrong, not let go. As an aside, I use CA as a coating for turned pens, many coats then finer and finer abrasives. |
#17
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 02/01/2019 02:06, FMurtz wrote:
Tim Streater wrote: In article , John Rumm wrote: On 01/01/2019 18:43, Murmansk wrote: What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. Or, if you got it wrong, not let go. As an aside, I use CA as a coating for turned pens, many coats then finer and finer abrasives. Cellulose dope is a lot cheaper. -- Gun Control: The law that ensures that only criminals have guns. |
#18
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
The Natural Philosopher wrote:
On 02/01/2019 02:06, FMurtz wrote: Tim Streater wrote: In article , John Rumm wrote: On 01/01/2019 18:43, Murmansk wrote: What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. Or, if you got it wrong, not let go. As an aside, I use CA as a coating for turned pens, many coats then finer and finer abrasives. Cellulose dope is a lot cheaper. It is never used in pen making, (should not say never, there might be some dill using it). research pen making and finishes |
#19
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 02/01/2019 05:22, FMurtz wrote:
The Natural Philosopher wrote: On 02/01/2019 02:06, FMurtz wrote: Tim Streater wrote: In article , John Rumm wrote: On 01/01/2019 18:43, Murmansk wrote: What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. Or, if you got it wrong, not let go. As an aside, I use CA as a coating for turned pens, many coats then finer and finer abrasives. Cellulose dope is a lot cheaper. It is never used in pen making, (should not say never, there might be some dill using it). research pen making and finishes a cursory glance shows its mainly amateurs turners doing it who have no clue. I have used CA as you describe and also cellulose dope. Or 'cellulose lacquer' as it is called when sold for non model aircraft use. Personally I prefer dope or sanding sealer . CA is expensive and messy. The finish is very similar. A layer of polished translucent plastic of some sort. -- Microsoft : the best reason to go to Linux that ever existed. |
#20
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Well, in my experience, no it shrinks when it dries.
There are a lot of different glues based on the unspellable word. I remember when where I worked dealt with Loctite, the sheer number of different versions of this stuff was mind boggling. I gather its the same stuff they glue wounds together with if they do not need stitching. I never did get it as when we worked with it we had to work in a well ventilated place due to some fumes containing cyanide. Ugh. Brian -- ----- -- This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please Note this Signature is meaningless.! "Murmansk" wrote in message ... I've not used Superglue very much but recently have found it useful for a couple of jobs. The problem is that it's so liquid it tends to run all over the place and you get into problems of gluing your fingers to things you didn't intend to (not that I sometimes intend to glue my fingers but you know what I mean!) I'm going to try the gel version but my question is, does the gel version just not flow around so much or does it also have an ability to fill small gaps? |
#21
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Yes that is why it glues bits of the human body so well.
Brian -- ----- -- This newsgroup posting comes to you directly from... The Sofa of Brian Gaff... Blind user, so no pictures please Note this Signature is meaningless.! "Murmansk" wrote in message ... What's aerosol activator? I thought moisture was what activated superglue. |
#22
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Brian Gaff wrote: I gather its the same stuff they glue wounds together with if they do not need stitching. Amazon helpfully points out that VetBond costs £5330 per litre, looks like you add a zero for DermaBond that's approved for use on humans. |
#23
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 02/01/2019 09:44, Andy Burns wrote:
Brian Gaff wrote: I gather its the same stuff they glue wounds together with if they do not need stitching. Amazon helpfully points out that VetBond costs £5330 per litre, looks like you add a zero for DermaBond that's approved for use on humans. I can confidentally assure the readers that aeromodelling involving scalpels, tissue and consumer grade superglue, is an excellent testing ground for the suitability of tissue and superglue plasters to cover bleeding gashes. If you have ripped an artery, use whatever you have. Even Amazon prime will take too long... -- "When a true genius appears in the world, you may know him by this sign, that the dunces are all in confederacy against him." Jonathan Swift. |
#24
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 02/01/2019 05:45, The Natural Philosopher wrote:
On 02/01/2019 05:22, FMurtz wrote: The Natural Philosopher wrote: On 02/01/2019 02:06, FMurtz wrote: Tim Streater wrote: In article , John Rumm wrote: On 01/01/2019 18:43, Murmansk wrote: What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. Or, if you got it wrong, not let go. As an aside, I use CA as a coating for turned pens, many coats then finer and finer abrasives. Cellulose dope is a lot cheaper. It is never used in pen making, (should not say never, there might be some dill using it). research pen making and finishes a cursory glance shows its mainly amateurs turners doing it who have no clue. The pros use it as well. The low viscosity glue has the advantage of wicking into fine cracks, and also being absorbed into the wood fibres, adding some extra strength and durability to cross grain sections of the turning. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#25
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 02/01/2019 11:39, John Rumm wrote:
On 02/01/2019 05:45, The Natural Philosopher wrote: On 02/01/2019 05:22, FMurtz wrote: The Natural Philosopher wrote: On 02/01/2019 02:06, FMurtz wrote: Tim Streater wrote: In article , John Rumm wrote: On 01/01/2019 18:43, Murmansk wrote: What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. Or, if you got it wrong, not let go. As an aside, I use CA as a coating for turned pens, many coats then finer and finer abrasives. Cellulose dope is a lot cheaper. It is never used in pen making, (should not say never, there might be some dill using it). research pen making and finishes a cursory glance shows its mainly amateurs turners doing it who have no clue. The pros use it as well. The low viscosity glue has the advantage of wicking into fine cracks, and also being absorbed into the wood fibres, adding some extra strength and durability to cross grain sections of the turning. As does cellulose lacquer. -- No Apple devices were knowingly used in the preparation of this post. |
#26
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
The Natural Philosopher wrote:
On 02/01/2019 11:39, John Rumm wrote: On 02/01/2019 05:45, The Natural Philosopher wrote: On 02/01/2019 05:22, FMurtz wrote: The Natural Philosopher wrote: On 02/01/2019 02:06, FMurtz wrote: Tim Streater wrote: In article , John Rumm wrote: On 01/01/2019 18:43, Murmansk wrote: What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. Or, if you got it wrong, not let go. As an aside, I use CA as a coating for turned pens, many coats then finer and finer abrasives. Cellulose dope is a lot cheaper. It is never used in pen making, (should not say never, there might be some dill using it). research pen making and finishes a cursory glance shows its mainly amateurs turners doing it who have no clue. The pros use it as well. The low viscosity glue has the advantage of wicking into fine cracks, and also being absorbed into the wood fibres, adding some extra strength and durability to cross grain sections of the turning. As does cellulose lacquer. I doubt that you can find anyone in the world that makes turned pens that uses cellulose lacquer, they do however use other finishes. |
#27
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
The Natural Philosopher wrote:
On 02/01/2019 09:44, Andy Burns wrote: Brian Gaff wrote: I gather its the same stuff they glue wounds together with if they do not need stitching. Amazon helpfully points out that VetBond costs £5330 per litre, looks like you add a zero for DermaBond that's approved for use on humans. I can confidentally assure the readers that aeromodelling involving scalpels, tissue and consumer grade superglue, is an excellent testing ground for the suitability of tissue and superglue plasters to cover bleeding gashes. If you have ripped an artery, use whatever you have. Even Amazon prime will take too long... Are you still balsa bashing? I did the hobby over 40 years ago. |
#28
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 02/01/2019 12:02, The Natural Philosopher wrote:
On 02/01/2019 11:39, John Rumm wrote: On 02/01/2019 05:45, The Natural Philosopher wrote: On 02/01/2019 05:22, FMurtz wrote: The Natural Philosopher wrote: On 02/01/2019 02:06, FMurtz wrote: Tim Streater wrote: In article , John Rumm wrote: On 01/01/2019 18:43, Murmansk wrote: What's aerosol activator? Its like making instant coffee in a microwave ;-) It makes a fast thing much faster - basically causes the glue to set on contact. So you can glue, hold in place, spray and let go. Or, if you got it wrong, not let go. As an aside, I use CA as a coating for turned pens, many coats then finer and finer abrasives. Cellulose dope is a lot cheaper. It is never used in pen making, (should not say never, there might be some dill using it). research pen making and finishes a cursory glance shows its mainly amateurs turners doing it who have no clue. The pros use it as well. The low viscosity glue has the advantage of wicking into fine cracks, and also being absorbed into the wood fibres, adding some extra strength and durability to cross grain sections of the turning. As does cellulose lacquer. Well not being a wood turner I will have to bow to your greater experience. Just reporting what all the wood turners I know have told me... -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#29
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
In message , Mr Pounder Esquire
writes The Natural Philosopher wrote: On 02/01/2019 09:44, Andy Burns wrote: Brian Gaff wrote: I gather its the same stuff they glue wounds together with if they do not need stitching. Amazon helpfully points out that VetBond costs £5330 per litre, looks like you add a zero for DermaBond that's approved for use on humans. I can confidentally assure the readers that aeromodelling involving scalpels, tissue and consumer grade superglue, is an excellent testing ground for the suitability of tissue and superglue plasters to cover bleeding gashes. If you have ripped an artery, use whatever you have. Even Amazon prime will take too long... Are you still balsa bashing? I did the hobby over 40 years ago. About 60 years ago, was a keen balsa basher (model aircraft). Field repairs would have been so much easier (even feasible) if only we'd had superglue in those days - not only for almost instant repairs to broken wings, but also for the backs of fingers that got deeply slashed by the propeller when trying to flick-start a 'difficult' diesel engine. -- Ian |
#30
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Ian Jackson wrote:
In message , Mr Pounder Esquire writes The Natural Philosopher wrote: On 02/01/2019 09:44, Andy Burns wrote: Brian Gaff wrote: I gather its the same stuff they glue wounds together with if they do not need stitching. Amazon helpfully points out that VetBond costs £5330 per litre, looks like you add a zero for DermaBond that's approved for use on humans. I can confidentally assure the readers that aeromodelling involving scalpels, tissue and consumer grade superglue, is an excellent testing ground for the suitability of tissue and superglue plasters to cover bleeding gashes. If you have ripped an artery, use whatever you have. Even Amazon prime will take too long... Are you still balsa bashing? I did the hobby over 40 years ago. About 60 years ago, was a keen balsa basher (model aircraft). Field repairs would have been so much easier (even feasible) if only we'd had superglue in those days - not only for almost instant repairs to broken wings, but also for the backs of fingers that got deeply slashed by the propeller when trying to flick-start a 'difficult' diesel engine. I can just about remember using Araldite Rapid. I also remember offering my wrist to the propeller whilst twiddling the needle valve. Single channel .................. ya! Those were the days. |
#31
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 03/01/2019 08:52, Ian Jackson wrote:
In message , Mr Pounder Esquire writes The Natural Philosopher wrote: On 02/01/2019 09:44, Andy Burns wrote: Brian Gaff wrote: I gather its the same stuff they glue wounds together with if they do not need stitching. Amazon helpfully points out that VetBond costs £5330 per litre, looks like you add a zero for DermaBond that's approved for use on humans. I can confidentally assure the readers that aeromodelling involving scalpels, tissue and consumer grade superglue, is an excellent testing ground for the suitability of tissue and superglue plasters to cover bleeding gashes. If you have ripped an artery, use whatever you have. Even Amazon prime will take too long... Are you still balsa bashing? I did the hobby over 40 years ago. About 60 years ago, was a keen balsa basher (model aircraft). Field repairs would have been so much easier (even feasible) if only we'd had superglue in those days - not only for almost instant repairs to broken wings, but also for the backs of fingers that got deeply slashed by the propeller when trying to flick-start a 'difficult' diesel engine. I still bash balsa though havent had too much time recently. -- How fortunate for governments that the people they administer don't think. Adolf Hitler |
#32
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On Wednesday, January 2, 2019 at 10:44:35 AM UTC+1, Andy Burns wrote:
Brian Gaff wrote: I gather its the same stuff they glue wounds together with if they do not need stitching. Amazon helpfully points out that VetBond costs £5330 per litre, looks like you add a zero for DermaBond that's approved for use on humans. I wish that DermaBond (2-Octyl cyanoacrylate) was easier and cheaper to get hold of, as I'm told it is the bee's knees for dealing with 'winter skin' cracks that open up round fingernails, which is a recurrent irritating problem I have. Considering you can get ordinary (Ethyl cyanoacrylate) superglue in pound shops, the difference is breathtaking. Sid |
#33
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
|
#34
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
In message , Andy Burns
writes wrote: 'winter skin' cracks that open up round fingernails, which is a recurrent irritating problem I have. Seems you're not alone https://www.amazon.com/gp/customer-r.../ref=cm_cr_dp_ d_rvw_ttl?ie=UTF8&ASIN=B004C12Q46 So it looks like I'm not the only one who suffers from this apparently minor condition! But 'irritating' these splits ain't. They are actually exceedingly painful, and can be quite disabling. They can be quite deep, and often seem to start beneath the skin, then work their way to the surface. The tip of the affected digit then hurts like hell - especially if you touch anything with it. Although people often laugh at me when I tell them about using superglue for fixing these splits, I have been using it ages. Some varieties are easier to use than others. Probably the best choice is one of medium viscosity, and which 'goes off' quickly to form the artificial scab. But the effect is amazing. The pain is gone almost immediately, and the split heals up in a day or two. -- Ian |
#35
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
In article ,
Ian Jackson wrote: In message , Andy Burns writes wrote: 'winter skin' cracks that open up round fingernails, which is a recurrent irritating problem I have. Seems you're not alone https://www.amazon.com/gp/customer-r.../ref=cm_cr_dp_ d_rvw_ttl?ie=UTF8&ASIN=B004C12Q46 So it looks like I'm not the only one who suffers from this apparently minor condition! But 'irritating' these splits ain't. They are actually exceedingly painful, and can be quite disabling. They can be quite deep, and often seem to start beneath the skin, then work their way to the surface. The tip of the affected digit then hurts like hell - especially if you touch anything with it. Although people often laugh at me when I tell them about using superglue for fixing these splits, I have been using it ages. Some varieties are easier to use than others. Probably the best choice is one of medium viscosity, and which 'goes off' quickly to form the artificial scab. But the effect is amazing. The pain is gone almost immediately, and the split heals up in a day or two. bear in mind that superglue was developed to hold wounds together (another military spin off), so it's doing its proper job. -- from KT24 in Surrey, England "I'd rather die of exhaustion than die of boredom" Thomas Carlyle |
#36
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
|
#38
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
On 04/01/2019 13:36, Roger Hayter wrote:
The Natural Philosopher wrote: On 04/01/2019 08:44, wrote: On Wednesday, January 2, 2019 at 10:44:35 AM UTC+1, Andy Burns wrote: Brian Gaff wrote: I gather its the same stuff they glue wounds together with if they do not need stitching. Amazon helpfully points out that VetBond costs £5330 per litre, looks like you add a zero for DermaBond that's approved for use on humans. I wish that DermaBond (2-Octyl cyanoacrylate) was easier and cheaper to get hold of, as I'm told it is the bee's knees for dealing with 'winter skin' cracks that open up round fingernails, which is a recurrent irritating problem I have. Are you sure that's not a fungal infection? Easily treated with generic anti-fungal (Clotrimazole) cream? And/or dermatitis, treatable with hydrocorisone cream (or stronger meds from a doctor). Both are worth trying. Id not heard ofd 'winter skin' before and a quick googles suggests it's caused by excessive loss of moisure too much washing, not much sweaing etc etc. But THEN if the skin cracks that renders it liable to infection and thats where I think te cracks are coming from Basically you have three potential problems on top of dry slkin - fungal - Clotrimazole - bacterial - use germolene or similar - allergic - use hydrocortisone I think all are fundamentally available from any pharmacy without a prescription and the pharmacist will probably take one look and give you the right one I get periodic bours of fungal crap - toes, and hand nails, and 'dhobi itch'. The cream fixes it completely in a day or two Considering you can get ordinary (Ethyl cyanoacrylate) superglue in pound shops, the difference is breathtaking. Sid -- Theres a mighty big difference between good, sound reasons and reasons that sound good. Burton Hillis (William Vaughn, American columnist) |
#39
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
"Ian Jackson" wrote in message ... In message , Andy Burns writes wrote: 'winter skin' cracks that open up round fingernails, which is a recurrent irritating problem I have. Seems you're not alone https://www.amazon.com/gp/customer-reviews/R243J6EPZ642VZ/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B004C12Q46 What do they mean by 'corners of the fingers and thumbs' ? So it looks like I'm not the only one who suffers from this apparently minor condition! But 'irritating' these splits ain't. They are actually exceedingly painful, and can be quite disabling. They can be quite deep, and often seem to start beneath the skin, then work their way to the surface. The tip of the affected digit then hurts like hell - especially if you touch anything with it. Although people often laugh at me when I tell them about using superglue for fixing these splits, I have been using it ages. Some varieties are easier to use than others. Probably the best choice is one of medium viscosity, and which 'goes off' quickly to form the artificial scab. But the effect is amazing. The pain is gone almost immediately, and the split heals up in a day or two. |
#40
Posted to uk.d-i-y
|
|||
|
|||
Super glue questions
Ian Jackson used his keyboard to write :
So it looks like I'm not the only one who suffers from this apparently minor condition! But 'irritating' these splits ain't. They are actually exceedingly painful, and can be quite disabling. They can be quite deep, and often seem to start beneath the skin, then work their way to the surface. The tip of the affected digit then hurts like hell - especially if you touchch anything with it. I used to suffer from them quite a lot. I used to work in a lot of unheated buildings and sometimes out in the cold weather on intricate tasks. Maybe my pain threshold is high, but they were more an annoyance to me, than a major source of pain. Although people often laugh at me when I tell them about using superglue for fixing these splits, I have been using it ages. Some varieties are easier to use than others. Probably the best choice is one of medium viscosity, and which 'goes off' quickly to form the artificial scab. But the effect is amazing. The pain is gone almost immediately, and the split heals up in a day or two. I did try that on cuts, when it first appeared. I would describe the pain from that, as much worse that that of a split i the finger tip. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Some of those "Super Glue' Krazy Glue" questions answered | Woodworking | |||
Super Glue alternative | Home Repair | |||
FA: Super cheap metalworking equipment -Mitutoyo, Starrett, Super/morse | Metalworking | |||
Formula for Super Glue accelerant? | Metalworking | |||
Super glue on a car dash | UK diy |