Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Increasing flame size on main gas ring
I have a rangemaster cooker, works fine except the main central gas flame is pretty pathetic and feeble. Its always been this way and I am getting fed up with the inability to make a decent stir fry with it.
I used to have a lacanche with this flame - http://www.youtube.com/watch?v=GQ9iJuTz6zY And want to at least increase the pathetic flame on the rangemaster a little. So how best to increase gas and air to the ring? Fit a larger jet? Drill it out to the next size up? Or increase gas pressure by fitting an adjustable gas regulator on the gas bottle? Cheers, Steve |
#2
Posted to uk.d-i-y
|
|||
|
|||
Increasing flame size on main gas ring
Mr Sandman Wrote in message:
I have a rangemaster cooker, works fine except the main central gas flame is pretty pathetic and feeble. It?s always been this way and I am getting fed up with the inability to make a decent stir fry with it. I used to have a lacanche with this flame - http://www.youtube.com/watch?v=GQ9iJuTz6zY And want to at least increase the pathetic flame on the rangemaster a little. So how best to increase gas and air to the ring? Fit a larger jet? Drill it out to the next size up? Or increase gas pressure by fitting an adjustable gas regulator on the gas bottle? Cheers, Steve All those options sound dangerous and unlikely to achieve what you want. The burner output/air mixing etc is all "engineered in" and isn't designed to be adjusted or modified. If you have counter space, consider an induction wok heater. https://www.ecatering.co.uk/buy/chef...-induction-wok -hob-3kw-heavy-duty-bt-500d_254.htm?vat=vat_yes&gclid=Cj0KCQjw3Kzd BRDWARIsAIJ8TMSAhVMAV2icTua4cdyPIUXl43DpSIu5GlnhX1 D3sLq-aOOj-ibjB6 4aAitKEALw_wcB Tim -- |
#3
Posted to uk.d-i-y
|
|||
|
|||
Increasing flame size on main gas ring
On Wednesday, 26 September 2018 10:52:13 UTC+1, Mr Sandman wrote:
I have a rangemaster cooker, works fine except the main central gas flame is pretty pathetic and feeble. Its always been this way and I am getting fed up with the inability to make a decent stir fry with it. I used to have a lacanche with this flame - http://www.youtube.com/watch?v=GQ9iJuTz6zY And want to at least increase the pathetic flame on the rangemaster a little. So how best to increase gas and air to the ring? Fit a larger jet? Drill it out to the next size up? Or increase gas pressure by fitting an adjustable gas regulator on the gas bottle? Cheers, Steve Jet size controls air/gas mix, so no to that. Gas pressure controls flame size, so it might be worth checking you've got full rated pressure. Modification or use out of spec would create legal issues. NT |
#4
Posted to uk.d-i-y
|
|||
|
|||
Increasing flame size on main gas ring
After serious thinking Tim+ wrote :
All those options sound dangerous and unlikely to achieve what you want. The burner output/air mixing etc is all "engineered in" and isn't designed to be adjusted or modified. The jet and the air will be configured for what should be the maximum gas input to gas ring. I had a gas ring (grill) where the jet fitted was marked with the correct size, but drilled to small. It was so weak, it took forever to grill anything. I carefully redrilled to the correct size and it then worked fine. Another possibility is a jet partially blocked, which can be cleared with a fine wire. Drilling jets would need a set of micro drill bits, which are not cheap. |
#5
Posted to uk.d-i-y
|
|||
|
|||
Increasing flame size on main gas ring
I will remover the jet to see wha5 size it is, maybe buy the next size up, see if it helps. I suspect there will be a point where increasing the size of the hole causes there to be too much gas and not enough air and create a blow torch effect? Too much air and you get yellow flames and soot right?
|
#6
Posted to uk.d-i-y
|
|||
|
|||
Increasing flame size on main gas ring
On 26/09/2018 15:56, Mr Sandman wrote:
I will remover the jet to see wha5 size it is, maybe buy the next size up, see if it helps. I suspect there will be a point where increasing the size of the hole causes there to be too much gas and not enough air and create a blow torch effect? Too much air and you get yellow flames and soot right? That's usually too little air, resulting in incomplete combustion. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#7
Posted to uk.d-i-y
|
|||
|
|||
Increasing flame size on main gas ring
On Wednesday, 26 September 2018 15:56:51 UTC+1, Mr Sandman wrote:
I will remover the jet to see wha5 size it is, maybe buy the next size up, see if it helps. I suspect there will be a point where increasing the size of the hole causes there to be too much gas and not enough air and create a blow torch effect? Too much air and you get yellow flames and soot right? and CO and death NT |
#8
Posted to uk.d-i-y
|
|||
|
|||
Increasing flame size on main gas ring
After serious thinking John Rumm wrote :
That's usually too little air, resulting in incomplete combustion. ...and production of carbon monoxide and potentially death! |
#9
Posted to uk.d-i-y
|
|||
|
|||
Increasing flame size on main gas ring
On 26/09/2018 11:02, Tim+ wrote:
If you have counter space, consider an induction wok heater. https://www.ecatering.co.uk/buy/chef...-induction-wok -hob-3kw-heavy-duty-bt-500d_254.htm?vat=vat_yes&gclid=Cj0KCQjw3Kzd BRDWARIsAIJ8TMSAhVMAV2icTua4cdyPIUXl43DpSIu5GlnhX1 D3sLq-aOOj-ibjB6 4aAitKEALw_wcB To save anyone else unwrapping that https://www.ecatering.co.uk/buy/chef-king-heavy-duty-induction-wok-hob-3kw-heavy-duty-bt-500d_254.htm AKA http://tinyurl.com/y9soqunv I haven't seen an induction wok burner before. How do you make sure the wok has the right bottom curve? Andy |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|