Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Screw covers.
Those push on covers for CSK Pozi screws as found on some kitchen
cabinets, etc. The smaller of the two commonly available, so about 12mm diameter. Loads on Ebay, but not the colour I need - dark grey. It's for the old car - has had the windscreen replaced and they lost some of the originals from the screen surround trim. I know they could be painted at a pinch, but not had 100% success with this before, even using a primer and paint sold as being suitable. -- *The early bird gets the worm, but the second mouse gets the cheese * Dave Plowman London SW To e-mail, change noise into sound. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Home Depot screw display - where can I get that awesome "screw thread board".? | Home Repair | |||
Is there some'secret' way to easily remove screw cap covers when dissassembling? | Electronics Repair | |||
Screw extractor for brass 10x32 screw | Metalworking | |||
Genie Garage Door Opener screw drive - Screw coming apart | Home Repair | |||
Screw Making: Making a rounded edge on the screw tip | Metalworking |