Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Help me with my dishwasher (real diy!)
Hello, I've got an indesit dishwasher (yeah yeah) that I've had for
the last 5 years - model DG5000WG. The recirculating pump is the same as the second one down at http://shop.ezee-fix.co.uk/Ezee_FixS...Motor_224.html and the impeller spindle seal has gone. I removed the pump, removed the impeller housing and cut it open around the glued seam. The seal is a ring of hard plastic (at the motor end) connected to a short rubber tube which is attached to the impeller, with a spring inbetween. The rubber tube has split. Now, being tight as I am I'm reluctant to spend 100 quid on a complete new motor for a couple of quid part. I doubt I can buy the exact spare so does anyone have any other suggestions? Are these things pretty standard if I can find a pump rebuild kit somewhere? I've tried using silcone sealant to repair the rubber part but it doesn't adhere very well and starts to leak again halfway into the wash cycle. Thanks! Steve |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
B0rked dishwasher | UK diy | |||
Indesit DG6145 DishWasher Oooops! | UK diy |