Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
British gas rc2 thermostat
Hi, we switched the boiler off for summer and when switching it back to water
and heat the rc2 wireless thermostat doesn't seem to be connecting to it module. Usually when we flick the thermostat up it flashes to say it receiving but it won't do that at present. I've changed the batteries etc but to no avail. Any ideas? -- for full context, visit https://www.homeownershub.com/uk-diy...t-1236226-.htm |
#2
Posted to uk.d-i-y
|
|||
|
|||
British gas rc2 thermostat
On 16/09/2017 21:44, Barry wrote:
Hi, we switched the boiler off for summer and when switching it back to water and heat the rc2 wireless thermostat doesn't seem to be connecting to it module. Usually when we flick the thermostat up it flashes to say it receiving but it won't do that at present. I've changed the batteries etc but to no avail. Any ideas? Perhaps someone is playing a joke and altered the channel? |
#3
Posted to uk.d-i-y
|
|||
|
|||
British gas rc2 thermostat
On 16/09/17 21:44, Barry wrote:
Hi, we switched the boiler off for summer and when switching it back to water and heat the rc2 wireless thermostat doesn't seem to be connecting to it module. Usually when we flick the thermostat up it flashes to say it receiving but it won't do that at present. I've changed the batteries etc but to no avail. Any ideas? Re calibrate the receiver. These eften lose setting after thunderstorms or power cuts. -- There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact. Mark Twain |
#4
Posted to uk.d-i-y
|
|||
|
|||
British gas rc2 thermostat
On 16/09/2017 21:44, Barry wrote:
Hi, we switched the boiler off for summer and when switching it back to water and heat the rc2 wireless thermostat doesn't seem to be connecting to it module. Usually when we flick the thermostat up it flashes to say it receiving but it won't do that at present. I've changed the batteries etc but to no avail. Any ideas? Its probably a re-badged Drayton unit See http://www.draytoncontrols.co.uk/sit...20Guide%29.pdf and the section titled "COMMISSIONING THE DIGISTAT +2RF or +3RF €˜WIRELESS SYSTEM" which explains the procedure for linking the remote unit to the receiver. -- mailto: news {at} admac {dot] myzen {dot} co {dot} uk |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|