Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
R. Cott. 21
Screeding, underfloor heating pipes and wet room decisions approach...
Floor heating design shows pipes laid across the whole area which will need a bit of juggling to accommodate the shower waste. The tile showrooms offer various sizes of pre-formed trays at moderately exorbitant prices. With dry screed I imagine a skilled screeder could create the falls within the tolerances needed for tiling. My other surprise is that the *tanking membrane* is actually a cement based roll on mix rather than the expected plastic sheet. I know Tim posted his experiences with setting out his wetroom but is there any other helpful experience in here? -- Tim Lamb |
#2
Posted to uk.d-i-y
|
|||
|
|||
R. Cott. 21
On Fri, 11 Aug 2017 09:57:21 +0100, Tim Lamb wrote:
Screeding, underfloor heating pipes and wet room decisions approach... Floor heating design shows pipes laid across the whole area which will need a bit of juggling to accommodate the shower waste. The tile showrooms offer various sizes of pre-formed trays at moderately exorbitant prices. With dry screed I imagine a skilled screeder could create the falls within the tolerances needed for tiling. My other surprise is that the *tanking membrane* is actually a cement based roll on mix rather than the expected plastic sheet. I know Tim posted his experiences with setting out his wetroom but is there any other helpful experience in here? Haven't read all the previous stuff, but we bought a pre-formed wet room tray which works well, but we forgot to put a slight slope on the rest of the floor so if water gets outside the tray it can go more or less anywhere. We had a wood floor with the tray, then a waterproof flooring material (tanking membrane) over everything and up the walls to skirting height. This was a plastic (or similar) sheet. Apart from the lack of slope on the main floor everything seems good. Cheers Dave R -- AMD FX-6300 in GA-990X-Gaming SLI-CF running Windows 7 Pro x64 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus |
#3
Posted to uk.d-i-y
|
|||
|
|||
R. Cott. 21
In message , David
writes On Fri, 11 Aug 2017 09:57:21 +0100, Tim Lamb wrote: Screeding, underfloor heating pipes and wet room decisions approach... Floor heating design shows pipes laid across the whole area which will need a bit of juggling to accommodate the shower waste. The tile showrooms offer various sizes of pre-formed trays at moderately exorbitant prices. With dry screed I imagine a skilled screeder could create the falls within the tolerances needed for tiling. My other surprise is that the *tanking membrane* is actually a cement based roll on mix rather than the expected plastic sheet. I know Tim posted his experiences with setting out his wetroom but is there any other helpful experience in here? Haven't read all the previous stuff, but we bought a pre-formed wet room tray which works well, but we forgot to put a slight slope on the rest of the floor so if water gets outside the tray it can go more or less anywhere. We had a wood floor with the tray, then a waterproof flooring material (tanking membrane) over everything and up the walls to skirting height. This was a plastic (or similar) sheet. Apart from the lack of slope on the main floor everything seems good. I have looked at those. I'd like to put slopes on the entire room which is only 2.25x1.6m. Pre-formed trays don't seem to go that big. Also the tile showroom kit had a very low quality waste trap which frightened me a bit. Might be OK for a boarded 2nd floor job where you have some chance of future access. -- Tim Lamb |
#4
Posted to uk.d-i-y
|
|||
|
|||
R. Cott. 21
On Saturday, 12 August 2017 15:54:57 UTC+1, David WE Roberts (Google) wrote:
Haven't read all the previous stuff, but we bought a pre-formed wet room tray which works well, but we forgot to put a slight slope on the rest of the floor so if water gets outside the tray it can go more or less anywhere. big mistake. NT |
#5
Posted to uk.d-i-y
|
|||
|
|||
R. Cott. 21
On Saturday, 12 August 2017 19:01:42 UTC+1, tabby wrote:
On Saturday, 12 August 2017 15:54:57 UTC+1, David WE Roberts (Google) wrote: Haven't read all the previous stuff, but we bought a pre-formed wet room tray which works well, but we forgot to put a slight slope on the rest of the floor so if water gets outside the tray it can go more or less anywhere. big mistake. Would also suggest using a straight down type shower head, a handholdable type in a wetroom is asking for trouble. DAMHIKTs. NT |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
R. Cott. 15 | UK diy | |||
R. Cott 14 | UK diy | |||
R. Cott. 13 (thermostats) | UK diy | |||
R. Cott. 13 | UK diy | |||
R. Cott. 12 | UK diy |