 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Rotary burr walking out of collet
I bought some 6mm burrs on a 3mm shank.
I also have a Silverline rotary tool: http://www.silverlinetools.com/en-GB...i-Tools/249765 I find the burr walks out and I can't seem to tighten up the collets sufficiently to make it stay in place for a decent length of time. Is there an alternative system that doesn't have this problem? Perhaps thread/bearing lock compound? -- Mike Perkins Video Solutions Ltd www.videosolutions.ltd.uk |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Grinding burr | UK diy | |||
| Identify this rotary burr/rasp/drill bit ? | UK diy | |||
| Bison 5C collet chuck vs. Kalamazoo 1CC collet chuck vs. drawtube/ collet closer | Metalworking | |||
| Miniature Burr? | Electronics Repair | |||
| Rotary tool collet nut | Woodworking | |||
Threaded Mode
