UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

 
 
LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1,005
Default House move: Trades/Craftsmen recommendations, Lincoln area

We are hoping to buy a 2 bedroomed bungalow on the outskirts of Lincoln and
are looking for recommendations for trades/craftsmen in the local area to
carry out detailed inspections and provide quotations for all essential
works.

We need someone to carry out an inspection of the electrical system. I had
assumed that the CU was an old Wylex or similar unit fitted with cartridge
fuse-holders but the surveyor says they are rewire-able! It is unlikely to
have an up to date electrical safety certificate!

Similarly the gas and central heating systems required detailed inspection.
The central heating boiler is an ageing Glow Worm wall mounted unit, vented
through the roof. The surveyor noted that "the boiler was in operation on the
day of inspection (and) it was noted that there were high volumes of water
running through into the expansion tank."

We also need estimates from roofing contractors to address the following:
"The undersides of the roof is lined with a working felt of Hessian
reinforced bitumen type. Over the years this has decayed where it is dressed
out under the bottom roof edges into the gutters. Water that is running down
the top of the felt (which has been driven through the roof coverings) is
dropping onto the roof edge timbers and causing consequential decay.
Remedial work is needed splicing in new sections of underfelt and possibly
new timbers."

Living in an area where most buildings have suspended floors and noting the
large number where the air bricks are wholly or partially obstructed where
gardens have been replaced by concrete, I must really kick myself for not
spotting this - the presence of a solid floor in this bungalow must have
given me a false sense of security! The tarmac surround is less than 150mm
below the damp course - from photographs, it appears to be only one brick
course below: (it would be a 300 mile round trip to 'pop round for a quick
look'!)

The garage is at the rear of and to the side of the property and the tarmac
driveway from the roadway runs beside the house. Again, this looks to be only
75mm below the damp course.

Would the solution be a gulley all the way round the house? In which case,
how wide? How deep? How should it be drained?

Anyway, that is something else that needs to be addressed ...

All advice and comments will be gratefully received!

--

Terry
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Finding Trades in One's Area Sunworshipper[_3_] Metalworking 3 November 5th 10 02:07 PM
what's the point of all this DIY? (house move nightmare) [email protected] UK diy 14 January 31st 07 09:02 AM
House Move: Sensical? Halvey Home Repair 9 December 15th 04 02:47 PM
Typical/average floor area to ground area ration for a house? [email protected] UK diy 6 September 22nd 04 03:29 PM
tax accountant for self employed trades in Reading area? John Stumbles UK diy 12 August 7th 03 11:42 PM


All times are GMT +1. The time now is 04:32 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"