Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Tile cutting again.
In the attched image the pipe stack is well out of plumb. Watched some
video clips and thinking this is the best way to go. Any suggestions welcome. From the top to the bottom of the boxed in area the plumb is out by 15mm. It is my intention to cut the tiles at 213mm all the way down and have an overhang at the bottom, then level with tile cement. OR Would I be best to level first with `one coat` ? Before tiling round the corner. I also have some 9mm plaster board cut offs that I could possibly use to take up the worst parts and then level out with cement. Any other suggestions. http://i64.photobucket.com/albums/h1...psyodck0lp.jpg |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tile cutting | UK diy | |||
cutting tile | Home Repair | |||
Tile cutters & cutting | UK diy | |||
Need tile cutting tip | Home Repair | |||
Cutting tile to fit new tub and vanity | Home Repair |