| Page 1 of 2 | 1 | 2 |
|
|
You are 2nd year apprentice - what would you do?
Your task is to cut out a doormat that is partially covered by a new wall in
the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. -- Adam |
You are 2nd year apprentice - what would you do?
On 05/11/2014 19:53, ARW wrote:
Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. Not a difficult choice if you eliminate the options that actually involve doing work. -- Colin Bignell |
You are 2nd year apprentice - what would you do?
On Wednesday, November 5, 2014 7:53:56 PM UTC, ARW wrote:
Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. I think my preferred option would be c - but then I like to avoid extension leads wherever possible, so I might have omitted the initial part of that sequence and gone straight for it. I'm assuming that the actual option chosen was d)... |
You are 2nd year apprentice - what would you do?
On Wed, 05 Nov 2014 19:53:47 +0000, ARW wrote:
So do you? How many years is this apprenticeship? |
You are 2nd year apprentice - what would you do?
On Wed, 5 Nov 2014 19:53:47 -0000, "ARW"
wrote: Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. None of the above. e) Wire a BS 1363 plug to the 110 side of the transformer and see how much faster the AG runs on 440v -- Graham. %Profound_observation% |
You are 2nd year apprentice - what would you do?
On Wed, 5 Nov 2014 19:53:47 -0000, "ARW" wrote:
d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. e) as above, and when asked why, answer "because pushing 10m of flex didn't work". Thomas Prufer |
You are 2nd year apprentice - what would you do?
On 05/11/2014 19:53, ARW wrote:
Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. I'd go for b first, then d, and if I could find you, I would try c as a last resort, lol |
You are 2nd year apprentice - what would you do?
"ARW" wrote in message ... Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. -- Adam You missed the correct one which is e) Get out mobile phone to call you and discover that your number is not in it. Sit on floor in everyone's way, and check Faceache, ****ter, text friends etc, until you turn up back on the scene ... Arfa |
You are 2nd year apprentice - what would you do?
On 05/11/2014 19:53, ARW wrote:
Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, ...... First of all someone has built a wall across a doormat, and left the doormat in place??? And to cut a doormat you use an angle grinder??? What country is this? Tim W |
You are 2nd year apprentice - what would you do?
Well even a first year should be able to see that if there is a socket right
next to the job, you can finish it, and take the bits back to base and fix it in the comfort of the workshop. Brian -- From the Sofa of Brian Gaff Reply address is active "ARW" wrote in message ... Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. -- Adam |
You are 2nd year apprentice - what would you do?
On Wednesday, 5 November 2014 19:53:56 UTC, ARW wrote:
Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. First I'd have a go at the **** that gave me a faulty extention lead and ask WTF is this ? I would not repair the lead as in *my* job opening up the plug invalids the @Passed@ sticker and the device would need to be checked by the 'cough' compendent testers we get on site about once a year. So that extention block could NOT be used until checked and stickered by 'pros'. I'm not sure I'd use an angle grinder to cut a door mat, I'd choose a stanley type knife first. I've also heard napalm and TNT can be used on door mats :-) Also for removing students from the lab after hours. |
You are 2nd year apprentice - what would you do?
On 05/11/2014 19:53, ARW wrote:
d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. This must be what you have trained him to do. I have no idea why, though? |
You are 2nd year apprentice - what would you do?
On 06/11/2014 12:00, whisky-dave wrote:
.... I'm not sure I'd use an angle grinder to cut a door mat, I'd choose a stanley type knife first. .... As this is at the entrance to a shopping centre, I would expect the mat to be a steel or aluminium grid, possibly with rubber or carpet inserts. -- Colin Bignell |
You are 2nd year apprentice - what would you do?
On 2014-11-05, ARW wrote:
Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the What the heck is the doormat made of that calls for an angle grinder? 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. Does the apprentice get partial credit for identifying the fault? So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. I think we've all guessed that this isn't a hypothetical story.... |
You are 2nd year apprentice - what would you do?
"Nightjar "cpb"@" "insert my surname here wrote in message
... On 06/11/2014 12:00, whisky-dave wrote: ... I'm not sure I'd use an angle grinder to cut a door mat, I'd choose a stanley type knife first. .... As this is at the entrance to a shopping centre, I would expect the mat to be a steel or aluminium grid, possibly with rubber or carpet inserts. Indeed. -- Adam |
You are 2nd year apprentice - what would you do?
"Adrian" wrote in message
... On Wed, 05 Nov 2014 19:53:47 +0000, ARW wrote: So do you? How many years is this apprenticeship? 4 years. -- Adam |
You are 2nd year apprentice - what would you do?
"Tim w" wrote in message
... On 05/11/2014 19:53, ARW wrote: Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, ...... First of all someone has built a wall across a doormat, and left the doormat in place??? Yes And to cut a doormat you use an angle grinder??? Yes What country is this? England -- Adam |
You are 2nd year apprentice - what would you do?
"Arfa Daily" wrote in message
... "ARW" wrote in message ... Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. -- Adam You missed the correct one which is e) Get out mobile phone to call you and discover that your number is not in it. Sit on floor in everyone's way, and check Faceache, ****ter, text friends etc, until you turn up back on the scene ... WINNER. -- Adam |
You are 2nd year apprentice - what would you do?
"ARW" wrote in message ... Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, the 110V transformer and the 230V extension lead. However after plugging the extension lead into one of the sockets in a shop when you come to use the angle grinder you have a power problem. Using the knowledge you have picked up in the last 15 months you quickly and correctly identify the 230V extension lead is at fault. So do you? a) Plug the 110V transformer into to the socket in the shop and then use the 110V extension lead to power the angle grinder b) Examine the plug connections and the fuse on the 230V extension lead and then using the knowledge and skills you you have picked up over the last 15 months fix the faulty extension lead c) Plug the transformer into the socket that is right next to the doormat and complete the job without using any extension leads. d) Walk aimlessly around the shopping centre for 30 minutes searching for me whilst carrying the faulty extension lead with you. And don't even think about winding up the lead before walking around the shops looking for me - you need to drag 10m of trailing flex behind you. -- Adam e) borrow the van and nip down to a local shed and get a new and better extension lead? |
You are 2nd year apprentice - what would you do?
On Wednesday, November 5, 2014 7:53:56 PM UTC, ARW wrote:
So do you? f) go and 'read' all the top-shelf magazines in the newsagent's. (or don't newsagents sell top-shelf magazines any more?) Owain |
You are 2nd year apprentice - what would you do?
On Thu, 06 Nov 2014 18:25:02 +0000, ARW wrote:
How many years is this apprenticeship? 4 years. Year two of four, and you're actually letting him loose with extension leads? **** me, is he on the fast-track? |
You are 2nd year apprentice - what would you do?
On 06/11/2014 09:35, Tim w wrote:
On 05/11/2014 19:53, ARW wrote: Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, ...... First of all someone has built a wall across a doormat, and left the doormat in place??? And to cut a doormat you use an angle grinder??? Of course you use an angle grinder to cut a doormat. WD40 [1] just won't do it. [1] which is the only other solution recommended on uk.d-i-y |
You are 2nd year apprentice - what would you do?
On Fri, 07 Nov 2014 09:40:41 +0000, Andrew May wrote:
Of course you use an angle grinder to cut a doormat. WD40 [1] just won't do it. [1] which is the only other solution recommended on uk.d-i-y Gaffer tape? |
You are 2nd year apprentice - what would you do?
On 07/11/2014 09:54, Adrian wrote:
On Fri, 07 Nov 2014 09:40:41 +0000, Andrew May wrote: Of course you use an angle grinder to cut a doormat. WD40 [1] just won't do it. [1] which is the only other solution recommended on uk.d-i-y Gaffer tape? Nah. You can't cut a doormat with gaffer tape :-) |
You are 2nd year apprentice - what would you do?
On Fri, 07 Nov 2014 09:57:16 +0000, Andrew May
wrote: On 07/11/2014 09:54, Adrian wrote: On Fri, 07 Nov 2014 09:40:41 +0000, Andrew May wrote: Of course you use an angle grinder to cut a doormat. WD40 [1] just won't do it. [1] which is the only other solution recommended on uk.d-i-y Gaffer tape? Nah. You can't cut a doormat with gaffer tape :-) What about using a Mattock. G Harman |
You are 2nd year apprentice - what would you do?
|
You are 2nd year apprentice - what would you do?
On Thursday, 6 November 2014 22:22:11 UTC, Adrian wrote:
On Thu, 06 Nov 2014 18:25:02 +0000, ARW wrote: How many years is this apprenticeship? 4 years. Year two of four, and you're actually letting him loose with extension leads? **** me, is he on the fast-track? This also reminds me of some students. monkey dust :- Kelly, work experience girl, https://www.youtube.com/watch?v=ERmdTGJxIhg |
You are 2nd year apprentice - what would you do?
Andrew May wrote:
Of course you use an angle grinder to cut a doormat. WD40 [1] just won't do it. It will, just needs somewhat higher pressure. Or ignition. Or both :) Theo |
You are 2nd year apprentice - what would you do?
On Fri, 07 Nov 2014 09:40:41 +0000, Andrew May wrote:
On 06/11/2014 09:35, Tim w wrote: On 05/11/2014 19:53, ARW wrote: Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, ...... First of all someone has built a wall across a doormat, and left the doormat in place??? And to cut a doormat you use an angle grinder??? Of course you use an angle grinder to cut a doormat. WD40 [1] just won't do it. [1] which is the only other solution recommended on uk.d-i-y Car body filler. -- My posts are my copyright and if @diy_forums or Home Owners' Hub wish to copy them they can pay me £30a message. Use the BIG mirror service in the UK: http://www.mirrorservice.org *lightning surge protection* - a w_tom conductor |
You are 2nd year apprentice - what would you do?
On 07/11/2014 13:49, whisky-dave wrote:
On Thursday, 6 November 2014 22:22:11 UTC, Adrian wrote: On Thu, 06 Nov 2014 18:25:02 +0000, ARW wrote: How many years is this apprenticeship? 4 years. Year two of four, and you're actually letting him loose with extension leads? **** me, is he on the fast-track? This also reminds me of some students. monkey dust :- Kelly, work experience girl, https://www.youtube.com/watch?v=ERmdTGJxIhg loved that series |
You are 2nd year apprentice - what would you do?
"stuart noble" wrote in message
... On 07/11/2014 13:49, whisky-dave wrote: On Thursday, 6 November 2014 22:22:11 UTC, Adrian wrote: On Thu, 06 Nov 2014 18:25:02 +0000, ARW wrote: How many years is this apprenticeship? 4 years. Year two of four, and you're actually letting him loose with extension leads? **** me, is he on the fast-track? This also reminds me of some students. monkey dust :- Kelly, work experience girl, https://www.youtube.com/watch?v=ERmdTGJxIhg loved that series https://www.youtube.com/watch?v=UKRm...l=davedavedean -- Adam |
You are 2nd year apprentice - what would you do?
/It will, just needs somewhat higher pressure./q
Pressure washer Jim K |
You are 2nd year apprentice - what would you do?
On 07/11/2014 18:46, ARW wrote:
"stuart noble" wrote in message ... On 07/11/2014 13:49, whisky-dave wrote: On Thursday, 6 November 2014 22:22:11 UTC, Adrian wrote: On Thu, 06 Nov 2014 18:25:02 +0000, ARW wrote: How many years is this apprenticeship? 4 years. Year two of four, and you're actually letting him loose with extension leads? **** me, is he on the fast-track? This also reminds me of some students. monkey dust :- Kelly, work experience girl, https://www.youtube.com/watch?v=ERmdTGJxIhg loved that series https://www.youtube.com/watch?v=UKRm...l=davedavedean I'm sure it was him at our local bus stop the other day. Actually there was a flock of them in school uniform. Fortunately some of the girls were pretty, so they might stand a chance in life |
You are 2nd year apprentice - what would you do?
On 07/11/2014 18:46, ARW wrote:
https://www.youtube.com/watch?v=UKRm...l=davedavedean Life eventually imitates art... I was in a local shop recently and the work experience made tea without boiling the water. 18+ and completely oblivious to the need. -- F |
You are 2nd year apprentice - what would you do?
On 08/11/2014 11:20, F wrote:
On 07/11/2014 18:46, ARW wrote: https://www.youtube.com/watch?v=UKRm...l=davedavedean Life eventually imitates art... I was in a local shop recently and the work experience made tea without boiling the water. 18+ and completely oblivious to the need. There are lots of way to make tea. Its only black tea that needs boiling water and even then some people like it stewed by boiling it on the stove for several minutes. You should never use boiling water with Chinese green tea. |
You are 2nd year apprentice - what would you do?
On 08/11/2014 14:07, Dennis@home wrote:
On 08/11/2014 11:20, F wrote: On 07/11/2014 18:46, ARW wrote: https://www.youtube.com/watch?v=UKRm...l=davedavedean Life eventually imitates art... I was in a local shop recently and the work experience made tea without boiling the water. 18+ and completely oblivious to the need. There are lots of way to make tea. Its only black tea that needs boiling water and even then some people like it stewed by boiling it on the stove for several minutes. You should never use boiling water with Chinese green tea. Sigh. OK, so I should have said 'I was in a local shop recently and the work experience made tea without boiling the water for a tea that needed boiling water...'. -- F |
You are 2nd year apprentice - what would you do?
On 08/11/14 14:07, Dennis@home wrote:
On 08/11/2014 11:20, F wrote: On 07/11/2014 18:46, ARW wrote: https://www.youtube.com/watch?v=UKRm...l=davedavedean Life eventually imitates art... I was in a local shop recently and the work experience made tea without boiling the water. 18+ and completely oblivious to the need. There are lots of way to make tea. Its only black tea that needs boiling water and even then some people like it stewed by boiling it on the stove for several minutes. You should never use boiling water with Chinese green tea. My entire set of inlaws seem to disagree with you there... |
You are 2nd year apprentice - what would you do?
On 08/11/2014 15:32, F wrote:
On 08/11/2014 14:07, Dennis@home wrote: On 08/11/2014 11:20, F wrote: On 07/11/2014 18:46, ARW wrote: https://www.youtube.com/watch?v=UKRm...l=davedavedean Life eventually imitates art... I was in a local shop recently and the work experience made tea without boiling the water. 18+ and completely oblivious to the need. There are lots of way to make tea. Its only black tea that needs boiling water and even then some people like it stewed by boiling it on the stove for several minutes. You should never use boiling water with Chinese green tea. Sigh. OK, so I should have said 'I was in a local shop recently and the work experience made tea without boiling the water for a tea that needed boiling water...'. :-) |
You are 2nd year apprentice - what would you do?
In message , Andrew May
writes On 06/11/2014 09:35, Tim w wrote: On 05/11/2014 19:53, ARW wrote: Your task is to cut out a doormat that is partially covered by a new wall in the entrance to a shopping centre. You decide to use the angle grinder, ...... First of all someone has built a wall across a doormat, and left the doormat in place??? And to cut a doormat you use an angle grinder??? Of course you use an angle grinder to cut a doormat. WD40 [1] just won't do it. [1] which is the only other solution recommended on uk.d-i-y You've overlooked pressure washer. -- bert |
You are 2nd year apprentice - what would you do?
In message om,
"Dennis@home" writes On 08/11/2014 11:20, F wrote: On 07/11/2014 18:46, ARW wrote: https://www.youtube.com/watch?v=UKRm...l=davedavedean Life eventually imitates art... I was in a local shop recently and the work experience made tea without boiling the water. 18+ and completely oblivious to the need. There are lots of way to make tea. Its only black tea that needs boiling water and even then some people like it stewed by boiling it on the stove for several minutes. You should never use boiling water with Chinese green tea. But neither should it be stone cold. -- bert |
| All times are GMT +1. The time now is 06:12 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter