Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
I need a bigger hole
Just got a new washing machine and found out (the hard way) that the pump is
rather faster than the on the old machine. The current waste is 32mm (yes, I know!) that has been OK for 30 years or so and is clear right through. I need to fit 40mm, but making the hole (which, IIRC, is just big enough for the 32mm) up to, say 50mm, would be rather difficult with a core drill. Any ideas please on a way to do it - only SDS and chisel seem possible. -- Peter. The gods will stay away whilst religions hold sway |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
It's bigger on its inside | UK diy | |||
Spacing of guide holes in the 3-hole Kreg Pocket Hole Jig? | Woodworking | |||
Build it Bigger | Home Repair | |||
*** Get a Pen*s Bigger than King K0ng's! Get Bigger Bre@sts! Cool Toys! Cheap MP3 Players! *** | Home Repair | |||
need bigger nuts | Metalworking |