|
Welding mask - necessary?
For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb.
-- "Why do the birds fly south to Africa in the autumn?" "Because it's too far for them to walk." |
Welding mask - necessary?
"Gefreiter Krueger" wrote in message ...
For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. Mike |
Welding mask - necessary?
In article ,
Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Ah. That explains why you can't see the difference between various types of lamps. -- *Keep honking...I'm reloading. Dave Plowman London SW To e-mail, change noise into sound. |
Welding mask - necessary?
On 07/12/2013 16:21, Gefreiter Krueger wrote:
For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It all a big conspiracy by elf'n'safty... you're no wimp, try it without. (and when the nice lady in A&E mentions "arc eye", you can tell her not to be silly, because you looked real close, and could not see any UV, so obviously there was none there!) -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Welding mask - necessary?
On Sat, 7 Dec 2013 16:33:56 -0000, "Muddymike"
wrote: "Gefreiter Krueger" wrote in message ... For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. Yurp, weld flash is no joke. |
Welding mask - necessary?
On Sat, 07 Dec 2013 16:37:20 -0000, John Rumm wrote:
On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It all a big conspiracy by elf'n'safty... you're no wimp, try it without. (and when the nice lady in A&E mentions "arc eye", you can tell her not to be silly, because you looked real close, and could not see any UV, so obviously there was none there!) People tell you not to look at the sun, that does no harm either. I could believe that long term it might damage your eyes.... -- Condoms should be used on every conceivable occasion. |
Welding mask - necessary?
On Sat, 07 Dec 2013 16:37:00 -0000, Dave Plowman (News) wrote:
In article , Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Ah. That explains why you can't see the difference between various types of lamps. I have perfect eyesight according to doctors. -- Condoms should be used on every conceivable occasion. |
Welding mask - necessary?
On Saturday 07 December 2013 16:33 Muddymike wrote in uk.d-i-y:
"Gefreiter Krueger" wrote in message ... For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. Mike Particularly if you don't want to get a painful case of arc-eye and possible long term eye damage! -- Tim Watts Personal Blog: http://squiddy.blog.dionic.net/ http://www.sensorly.com/ Crowd mapping of 2G/3G/4G mobile signal coverage |
Welding mask - necessary?
On Sat, 07 Dec 2013 16:37:40 -0000, Apellation Controlee wrote:
On Sat, 7 Dec 2013 16:33:56 -0000, "Muddymike" wrote: "Gefreiter Krueger" wrote in message ... For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. Yurp, weld flash is no joke. If it's from the UV, would you not also get sunburn on your face then? If you go out in the sun, your face gets burnt long before anything happens to your eyes. -- Then there was the Eskimo girl who spent the night with her boyfriend and next morning found she was six months pregnant. |
Welding mask - necessary?
On 07/12/2013 16:21, Gefreiter Krueger wrote:
For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? -- Dave - The Medway Handyman www.medwayhandyman.co.uk |
Welding mask - necessary?
On Sat, 07 Dec 2013 16:33:56 -0000, Muddymike wrote:
"Gefreiter Krueger" wrote in message ... For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. The trouble is you can't see the workpiece through it very easily. I'm talking about a single one off small job here, not welding all day. -- Backup not found. A)bort, R)etry or P)anic? |
Welding mask - necessary?
On Sat, 07 Dec 2013 16:46:18 -0000, Tim Watts wrote:
On Saturday 07 December 2013 16:33 Muddymike wrote in uk.d-i-y: "Gefreiter Krueger" wrote in message ... For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. Mike Particularly if you don't want to get a painful case of arc-eye and possible long term eye damage! It doesn't look brighter than a lightbulb (this is a small welder), and UV would give me sunburn on my face before it damaged my eyes surely? -- When they found out their wives were attending a sex-toy party, the husbands refused to go and pick them up, and instead left them to their own devices. |
Welding mask - necessary?
"Dave Plowman (News)" wrote in message ... In article , Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Ah. That explains why you can't see the difference between various types of lamps. It also explains why he's as thick as pig-****. --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
Welding mask - necessary?
On 07/12/2013 16:46, The Medway Handyman wrote:
On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? ROFLMAO. |
Welding mask - necessary?
In message , The Medway Handyman
writes On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? Unfortunately yes. He should carry a health warning, "only enter into conversation if feeling like banging head against wall" Whose head is up to debate.......... -- Bill --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
Welding mask - necessary?
"Gefreiter Krueger" wrote in message ...
On Sat, 07 Dec 2013 16:37:20 -0000, John Rumm wrote: On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It all a big conspiracy by elf'n'safty... you're no wimp, try it without. (and when the nice lady in A&E mentions "arc eye", you can tell her not to be silly, because you looked real close, and could not see any UV, so obviously there was none there!) People tell you not to look at the sun, that does no harm either. I could believe that long term it might damage your eyes.... If you are intent on being a plonker and don't believe the warnings given here by all means at you own risk go ahead and give your self arc eye. It is VERY painful and as other have said can have lasting consequences. But as an already reduced to one eyed Cyclops as I am, if you do, I think that you are an utter fool and don't see why the NHS should be burdened with idiots like you. AWEM |
Welding mask - necessary?
On Sat, 07 Dec 2013 16:52:51 -0000, bm wrote:
"Dave Plowman (News)" wrote in message ... In article , Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Ah. That explains why you can't see the difference between various types of lamps. It also explains why he's as thick as pig-****. I'm not the thick one around here. I can think for myself unlike you lot. -- Inside every older person is a younger person wondering what the **** happened. |
Welding mask - necessary?
On Sat, 07 Dec 2013 16:46:26 -0000, The Medway Handyman wrote:
On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? It was a sensible enough question. Note how I said "small arc welder for a small job" - are the effects only from long term exposure? I know for certain you don't get it in 2 minutes, because I've watched someone welding my car for a little. -- I was at an ATM yesterday when a little old lady asked if I could check her balance, so I pushed her over. |
Welding mask - necessary?
On Sat, 07 Dec 2013 17:03:11 -0000, Andrew Mawson wrote:
"Gefreiter Krueger" wrote in message ... On Sat, 07 Dec 2013 16:37:20 -0000, John Rumm wrote: On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It all a big conspiracy by elf'n'safty... you're no wimp, try it without. (and when the nice lady in A&E mentions "arc eye", you can tell her not to be silly, because you looked real close, and could not see any UV, so obviously there was none there!) People tell you not to look at the sun, that does no harm either. I could believe that long term it might damage your eyes.... If you are intent on being a plonker and don't believe the warnings given here by all means at you own risk go ahead and give your self arc eye. It is VERY painful and as other have said can have lasting consequences. But as an already reduced to one eyed Cyclops as I am, if you do, I think that you are an utter fool and don't see why the NHS should be burdened with idiots like you. Why not explain why and how quickly it happens instead of childish name calling? As I understand it, it's the UV light that's the problem. So why is it any worse than looking at the sun? Why won't you feel sunburn on your face first like you do on a hot summer's day? And how much welding do you have to do before it happens? Remember, I said "small arc welder for a small job". -- There is more money being spent on breast implants and Viagra today than on Alzheimer's research. This means that by 2040, there should be a large elderly population with perky boobs and huge erections and absolutely no recollection of what to do with them. |
Welding mask - necessary?
On 12/7/2013 11:58 AM, Bill wrote:
writes On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? Unfortunately yes. He should carry a health warning, "only enter into conversation if feeling like banging head against wall" Whose head is up to debate.......... No-one could be that aggressively dimwitted. He's probably sitting there giggling at all the responses he gets. |
Welding mask - necessary?
On Sat, 07 Dec 2013 16:46:26 +0000, Gefreiter Krueger wrote:
On Sat, 07 Dec 2013 16:37:40 -0000, Apellation Controlee wrote: On Sat, 7 Dec 2013 16:33:56 -0000, "Muddymike" wrote: "Gefreiter Krueger" wrote in message ... For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. Yurp, weld flash is no joke. If it's from the UV, would you not also get sunburn on your face then? If you go out in the sun, your face gets burnt long before anything happens to your eyes. Yes! but DAMHIKT Avpx -- "Divide by cucumber error. Please reinstall universe and reboot." (Hogfather) 17:15:01 up 2 days, 5 min, 6 users, load average: 0.72, 0.54, 0.48 |
Welding mask - necessary?
On 07/12/2013 17:12, S Viemeister wrote:
No-one could be that aggressively dimwitted. He's probably sitting there giggling at all the responses he gets. He regularly demonstrates all the appearances of exactly that level of wittedness. Probably thinks that FlashBlock will protect his eyes. One of the very few inhabitants of my killfile. -- Rod |
Welding mask - necessary?
On Sat, 07 Dec 2013 17:12:18 -0000, S Viemeister wrote:
On 12/7/2013 11:58 AM, Bill wrote: writes On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb.. Is this **** for real? Unfortunately yes. He should carry a health warning, "only enter into conversation if feeling like banging head against wall" Whose head is up to debate.......... No-one could be that aggressively dimwitted. He's probably sitting there giggling at all the responses he gets. Nope, just asking a reasonable question. What exactly causes the problem, does it apply to a small welder, and how long before it happens? -- Health and Safety Officer required to start ASAP, circa £35K: Your main duties will include: Hampering other staff and preventing them from carrying on with their duties. Handing out huge quantities of pointless paperwork consuming approx 1 rainforest per year. |
Welding mask - necessary?
On Sat, 07 Dec 2013 17:16:04 -0000, The Nomad wrote:
On Sat, 07 Dec 2013 16:46:26 +0000, Gefreiter Krueger wrote: On Sat, 07 Dec 2013 16:37:40 -0000, Apellation Controlee wrote: On Sat, 7 Dec 2013 16:33:56 -0000, "Muddymike" wrote: "Gefreiter Krueger" wrote in message ... For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. Yurp, weld flash is no joke. If it's from the UV, would you not also get sunburn on your face then? If you go out in the sun, your face gets burnt long before anything happens to your eyes. Yes! but DAMHIKT If the answer is yes, then what is the problem? You stop welding when your face is red. -- Connecticut police are investigating a string of shootings where clues are reportedly contained in a rap CD. They are also questioning Bob Marley about the shooting of a sheriff. |
Welding mask - necessary?
The Medway Handyman wrote:
On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? Well he's a real troll who seems to have you all dancing to his tune... Tim |
Welding mask - necessary?
On 07/12/2013 17:20 Gefreiter Krueger wrote:
On Sat, 07 Dec 2013 17:12:18 -0000, S Viemeister wrote: On 12/7/2013 11:58 AM, Bill wrote: writes On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? Unfortunately yes. He should carry a health warning, "only enter into conversation if feeling like banging head against wall" Whose head is up to debate.......... No-one could be that aggressively dimwitted. He's probably sitting there giggling at all the responses he gets. Nope, just asking a reasonable question. What exactly causes the problem, does it apply to a small welder, and how long before it happens? Why not try it and then let us know...? -- F |
Welding mask - necessary?
On Sat, 07 Dec 2013 17:28:57 -0000, Tim+ wrote:
The Medway Handyman wrote: On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? Well he's a real troll who seems to have you all dancing to his tune... Show me a dictionary where troll is defined as someone with differing opinions to the majority. -- You can't polish a turd, but it's funny as **** watching someone try. |
Welding mask - necessary?
In article ,
"Gefreiter Krueger" writes: On Sat, 07 Dec 2013 16:46:18 -0000, Tim Watts wrote: On Saturday 07 December 2013 16:33 Muddymike wrote in uk.d-i-y: "Gefreiter Krueger" wrote in message ... For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. Mike Particularly if you don't want to get a painful case of arc-eye and possible long term eye damage! It doesn't look brighter than a lightbulb (this is a small welder), and UV would give me sunburn on my face before it damaged my eyes surely? You can't see how bright it is - it saturates the recepters. You can't see the UV components at all. Different UV wavelengths and intensities have different effects. Many years ago when gyms might have had high-bay mercury vapour lamps, one of the hazards was the outer bulb breaking (e.g. hit by a ball or similar). The lamp seems to carry on working, but somewhat dimmer. After about half an hour in the gym, typically just as the players are leaving, they would start to detect stinging in their eyes. The timing is such that showering was sometimes blamed. Later in the day/evening, badly bloodshot eyes, and serious stinging. This was all due to the UV exposure caused by the missing outer glass bulb in the gym. UV exposure such as this is known to lead to early onset cateracts, and a contributor to macular degeneration. The lighting problem required a change to the design of mercury vapour lamps. The wires inside the outer bulb were changed such that they burn out on exposure to oxygen, so that a mercury vapour lamp with a smashed outer bulb (which normally stops the UV) will quickly burn out and stop the lamp working. -- Andrew Gabriel [email address is not usable -- followup in the newsgroup] |
Welding mask - necessary?
On Sat, 07 Dec 2013 17:29:53 -0000, F news@nowhere wrote:
On 07/12/2013 17:20 Gefreiter Krueger wrote: On Sat, 07 Dec 2013 17:12:18 -0000, S Viemeister wrote: On 12/7/2013 11:58 AM, Bill wrote: writes On 07/12/2013 16:21, Gefreiter Krueger wrote: Is this **** for real? Unfortunately yes. He should carry a health warning, "only enter into conversation if feeling like banging head against wall" Whose head is up to debate.......... No-one could be that aggressively dimwitted. He's probably sitting there giggling at all the responses he gets. Nope, just asking a reasonable question. What exactly causes the problem, does it apply to a small welder, and how long before it happens? Why not try it and then let us know...? And you lot call me a troll. The number of childish comments in here is ridiculous. -- 19 Brits have died in the last 3 years believing that christmas decorations were chocolate. |
Welding mask - necessary?
On Sat, 07 Dec 2013 17:35:43 -0000, Andrew Gabriel wrote:
In article , "Gefreiter Krueger" writes: On Sat, 07 Dec 2013 16:46:18 -0000, Tim Watts wrote: On Saturday 07 December 2013 16:33 Muddymike wrote in uk.d-i-y: "Gefreiter Krueger" wrote in message ... For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. It is very necessary. You don't need anything fancy though. A simple hand held shield will do. Mike Particularly if you don't want to get a painful case of arc-eye and possible long term eye damage! It doesn't look brighter than a lightbulb (this is a small welder), and UV would give me sunburn on my face before it damaged my eyes surely? You can't see how bright it is - it saturates the recepters. But I've been dazzled by things, and it wasn't dazzling. Perhaps it's because it's such a small point? P.S. I ignored the "you must wear special glasses" when watching the solar eclipse around 2000, and never fell foul (fowl?) of anything. You can't see the UV components at all. Different UV wavelengths and intensities have different effects. Many years ago when gyms might have had high-bay mercury vapour lamps, one of the hazards was the outer bulb breaking (e.g. hit by a ball or similar). The lamp seems to carry on working, but somewhat dimmer. After about half an hour in the gym, typically just as the players are leaving, they would start to detect stinging in their eyes. The timing is such that showering was sometimes blamed. Later in the day/evening, badly bloodshot eyes, and serious stinging. This was all due to the UV exposure caused by the missing outer glass bulb in the gym. UV exposure such as this is known to lead to early onset cateracts, and a contributor to macular degeneration. The lighting problem required a change to the design of mercury vapour lamps. The wires inside the outer bulb were changed such that they burn out on exposure to oxygen, so that a mercury vapour lamp with a smashed outer bulb (which normally stops the UV) will quickly burn out and stop the lamp working. I see. Well thanks for about the only sensible reply in the thread. I shall use a mask. -- "Sex is one of the most beautiful, wholesome, and natural things that money can buy." -- Steve Martin |
Welding mask - necessary?
On 07/12/2013 16:21, Gefreiter Krueger wrote:
For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. yep, caught a case or arc-eye once from accidentally striking arc while I was moving to get in better position ... hurts like hell. |
Welding mask - necessary?
On Sat, 07 Dec 2013 17:44:06 -0000, Rick Hughes wrote:
On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. yep, caught a case or arc-eye once from accidentally striking arc while I was moving to get in better position ... hurts like hell. Just from ONE arc for a few seconds? That can't be true. I've often watched people welding for a couple of minutes. -- Man: "Do you wash your clothes in Windex?" Woman: "Why do you ask?" Man: "I can see myself in your pants." |
Welding mask - necessary?
"The Medway Handyman" wrote in message ... On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? No, he's a notorious troll. He asks stupid questions and then argues with everyone who gives him the correct answer. He's got an IQ of 5000 but he can't Google and has no common sense. |
Welding mask - necessary?
"Gefreiter Krueger" wrote in message ... On Sat, 07 Dec 2013 17:28:57 -0000, Tim+ wrote: The Medway Handyman wrote: On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? Well he's a real troll who seems to have you all dancing to his tune... Show me a dictionary where troll is defined as someone with differing opinions to the majority. That's not what's happening here. If the majority agreed with you, you'd take the contrary position & start arguing that it's stupid to weld without a mask. That's trolling. |
Welding mask - necessary?
"Gefreiter Krueger" wrote in message ... On Sat, 07 Dec 2013 17:44:06 -0000, Rick Hughes wrote: On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. yep, caught a case or arc-eye once from accidentally striking arc while I was moving to get in better position ... hurts like hell. Just from ONE arc for a few seconds? That can't be true. Well there's your answer - don't bother with a mask. |
Welding mask - necessary?
On Sat, 07 Dec 2013 18:15:54 -0000, Mentalguy2k8 wrote:
"The Medway Handyman" wrote in message ... On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? No, he's a notorious troll. He asks stupid questions and then argues with everyone who gives him the correct answer. He's got an IQ of 5000 but he can't Google and has no common sense. I discuss. Just because you can't handle an opinion other than your own. -- Illegal is a big sick bird. |
Welding mask - necessary?
On Sat, 07 Dec 2013 18:18:03 -0000, Mentalguy2k8 wrote:
"Gefreiter Krueger" wrote in message ... On Sat, 07 Dec 2013 17:28:57 -0000, Tim+ wrote: The Medway Handyman wrote: On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. Is this **** for real? Well he's a real troll who seems to have you all dancing to his tune... Show me a dictionary where troll is defined as someone with differing opinions to the majority. That's not what's happening here. If the majority agreed with you, you'd take the contrary position & start arguing that it's stupid to weld without a mask. No I wouldn't. You see if I agree with something posted, I don't reply. Most don't. Or you just have hundred of posts saying "me too". -- Women are like small children. You bring a new one home and the ones already there resent it. |
Welding mask - necessary?
On Sat, 07 Dec 2013 18:22:19 -0000, Mentalguy2k8 wrote:
"Gefreiter Krueger" wrote in message ... On Sat, 07 Dec 2013 17:44:06 -0000, Rick Hughes wrote: On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. yep, caught a case or arc-eye once from accidentally striking arc while I was moving to get in better position ... hurts like hell. Just from ONE arc for a few seconds? That can't be true. Well there's your answer - don't bother with a mask. I'm welding for more than a few seconds. -- An optimist thinks this is the best possible world. A pessimist fears this is true. |
Welding mask - necessary?
In article ,
Gefreiter Krueger wrote: On Sat, 07 Dec 2013 17:44:06 -0000, Rick Hughes wrote: On 07/12/2013 16:21, Gefreiter Krueger wrote: For a small arc welder for a small job, is a mask really necessary? The spark doesn't look any brighter than starting at a bright lightbulb. yep, caught a case or arc-eye once from accidentally striking arc while I was moving to get in better position ... hurts like hell. Just from ONE arc for a few seconds? That can't be true. I've often watched people welding for a couple of minutes. but I suspect you would be much closer if you wer doing the welding yourself. -- From KT24 Using a RISC OS computer running v5.18 |
Welding mask - necessary?
"Gefreiter Krueger" wrote in message ... yep, caught a case or arc-eye once from accidentally striking arc while I was moving to get in better position ... hurts like hell. Just from ONE arc for a few seconds? That can't be true. Well there's your answer - don't bother with a mask. I'm welding for more than a few seconds. It'll be fine. |
| All times are GMT +1. The time now is 09:21 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter