I need to replace the built in oven as the grill is not longer working
correctly. The oven is standard 600mm wide, the hob is 580mm x 500mm but at
the back of the hob is a vent for the oven also the hob has a hinged lid.
How can I blank off the gap for the oven vent as I understand modern ovens
vent at the front. I was in John Lewis and they said that you can only
replace the work top.
I was hoping that there would be some sort of standard template to put on
top of the work top then cut a new opening. I guess that I can fit an
aluminium or stainless steel strip behind the new hob to fill the opening.

Kevin

The words "amtcing worktop" in the subject of your post are bit mysterious but I think if you could post a photo of what you are trying to deal with it would help people to come up with some suggestions.

"Murmansk" wrote in message
...

The words "amtcing worktop" in the subject of your post are bit mysterious
but I think if you could post a photo of what you are trying to deal with it
would help people to come up with some suggestions.
What I mean is the cut out in the work top will be bigger than a the new set
up. Currently it is hob and vent for the oven plus cut out for the hinges of
the lid. Title should read matching.