Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Laquer for brass
Have some brushed brass grid switch plates which are looking past their
best. Obsolete design, so can't just replace them. Removing the old lacquer and sanding them down looks fine - but what lacquer to use? Preferably an aerosol. A slightly brown tinted lacquer which darkened them slightly would match the original best. -- *I like cats, too. Let's exchange recipes. Dave Plowman London SW To e-mail, change noise into sound. |
#2
Posted to uk.d-i-y
|
|||
|
|||
Laquer for brass
On Sunday, August 4, 2013 11:26:03 AM UTC+12, Dave Plowman (News) wrote:
Have some brushed brass grid switch plates which are looking past their best. Obsolete design, so can't just replace them. Removing the old lacquer and sanding them down looks fine - but what lacquer to use? Preferably an aerosol. A slightly brown tinted lacquer which darkened them slightly would match the original best. I use Incralac. It lasts out in the weather for years. |
#3
Posted to uk.d-i-y
|
|||
|
|||
Laquer for brass
On Sat, 3 Aug 2013 17:46:47 -0700 (PDT), Matty F
wrote: On Sunday, August 4, 2013 11:26:03 AM UTC+12, Dave Plowman (News) wrote: Have some brushed brass grid switch plates which are looking past their best. Obsolete design, so can't just replace them. Removing the old lacquer and sanding them down looks fine - but what lacquer to use? Preferably an aerosol. A slightly brown tinted lacquer which darkened them slightly would match the original best. I use Incralac. It lasts out in the weather for years. I agree. I use the brush on version http://marinestore.co.uk/Incralac_Ry...uer_500ml.html but from memory they do it an aerosol. -- rbel |
#4
Posted to uk.d-i-y
|
|||
|
|||
Laquer for brass
In article ,
rbel wrote: On Sat, 3 Aug 2013 17:46:47 -0700 (PDT), Matty F wrote: On Sunday, August 4, 2013 11:26:03 AM UTC+12, Dave Plowman (News) wrote: Have some brushed brass grid switch plates which are looking past their best. Obsolete design, so can't just replace them. Removing the old lacquer and sanding them down looks fine - but what lacquer to use? Preferably an aerosol. A slightly brown tinted lacquer which darkened them slightly would match the original best. I use Incralac. It lasts out in the weather for years. I agree. I use the brush on version http://marinestore.co.uk/Incralac_Ry...uer_500ml.html but from memory they do it an aerosol. Thanks - aerosol found. Think it will be better for this application. Is it totally clear or slightly tinted? -- *Rehab is for quitters. Dave Plowman London SW To e-mail, change noise into sound. |
#5
Posted to uk.d-i-y
|
|||
|
|||
Laquer for brass
On Sun, 04 Aug 2013 00:26:03 +0100, Dave Plowman (News) wrote:
Removing the old lacquer and sanding them down looks fine - but what lacquer to use? I wouldn't but then I like the patina that develops over polished brass, particularly on things that are used. -- Cheers Dave. |
#6
Posted to uk.d-i-y
|
|||
|
|||
Laquer for brass
On Sun, 04 Aug 2013 11:19:09 +0100, "Dave Plowman (News)"
wrote: In article , rbel wrote: On Sat, 3 Aug 2013 17:46:47 -0700 (PDT), Matty F wrote: On Sunday, August 4, 2013 11:26:03 AM UTC+12, Dave Plowman (News) wrote: Have some brushed brass grid switch plates which are looking past their best. Obsolete design, so can't just replace them. Removing the old lacquer and sanding them down looks fine - but what lacquer to use? Preferably an aerosol. A slightly brown tinted lacquer which darkened them slightly would match the original best. I use Incralac. It lasts out in the weather for years. I agree. I use the brush on version http://marinestore.co.uk/Incralac_Ry...uer_500ml.html but from memory they do it an aerosol. Thanks - aerosol found. Think it will be better for this application. Is it totally clear or slightly tinted? When I used it on polished copper it appeared to be a clear finish. Looking down inside the narrow neck of the can it does look clear but to be absolutely sure I placed a drop on a piece of white art card and it is very clear. -- rbel |
#7
Posted to uk.d-i-y
|
|||
|
|||
Laquer for brass
In article o.uk,
Dave Liquorice wrote: On Sun, 04 Aug 2013 00:26:03 +0100, Dave Plowman (News) wrote: Removing the old lacquer and sanding them down looks fine - but what lacquer to use? I wouldn't but then I like the patina that develops over polished brass, particularly on things that are used. It wouldn't then match the others. An old design (round) switch might look ok like that - but I don't think it would suit a more modern one. -- *How can I miss you if you won't go away? Dave Plowman London SW To e-mail, change noise into sound. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Laquer over paint | Woodworking | |||
Laquer finish for outside?? | Woodworking | |||
Hand rub Laquer? | Woodworking | |||
laquer over polyurethane | Woodworking | |||
Polyurethane over laquer? | Woodworking |