Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Triton T80xr Shower unit - "Low Pressure" warning and water is cold
Just moved in to the new house, and, as per title, there is a Triton
T80xr Shower unit. There seems plenty of water pressure, but the "Low Pressure" warning is permanently lit and the water permanently cold. I first turned it on not realising that it was controlled by a different stopcock to the main house, so I suspect it needs some sort of internal reset. I've tried switching it off by the isolator switch outside the room, but no change. Any ideas? PS: If it should prove relevant, currently connecting via tethered mobile with fringe reception - very, very slow. -- ================================================== ======= Please always reply to ng as the email in this post's header does not exist. Or use a contact address at: http://www.macfh.co.uk/JavaJive/JavaJive.html http://www.macfh.co.uk/Macfarlane/Macfarlane.html |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
sporadic low pressure warning mode on Triton Shower? | UK diy | |||
Triton T80xr shower faulty | UK diy | |||
Potterton puma 80 "Cold water inlet" | UK diy | |||
Triton T80xr electric shower | UK diy | |||
Type "L" hot and cold water copper lines? | Home Repair |