Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
bending an old bow saw blade
I have an old bow saw blade that I need to put a right angle bend into. The blade won't be used for sawing once the bend is in place.
Will I able to simply heat this up then bend it in a vice like any other piece of steel, or will the fact it is hardened cause an issue. |
#2
Posted to uk.d-i-y
|
|||
|
|||
bending an old bow saw blade
|
#3
Posted to uk.d-i-y
|
|||
|
|||
bending an old bow saw blade
On Saturday, December 15, 2012 2:57:40 PM UTC, newshound wrote:
On 15/12/2012 14:37, wrote: I have an old bow saw blade that I need to put a right angle bend into. The blade won't be used for sawing once the bend is in place. Will I able to simply heat this up then bend it in a vice like any other piece of steel, or will the fact it is hardened cause an issue. Get it red hot and it will bend. Let it cool naturally and the heated bit will be (relatively) soft but that presumably doesn't matter. Quench it from red heat in water or oil, and it will harden, but is likely to be brittle. Thanks, worked a treat. |
#4
Posted to uk.d-i-y
|
|||
|
|||
bending an old bow saw blade
wrote in message ... I have an old bow saw blade that I need to put a right angle bend into. The blade won't be used for sawing once the bend is in place. Will I able to simply heat this up then bend it in a vice like any other piece of steel, or will the fact it is hardened cause an issue. Just being nosey, but why do you want to do this? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bending 8mm and 10mm pipe, bending spring or cheap pipe bender? | UK diy | |||
Stanley 20-047 20-Inch Blade Length x 9 Points Per Inch FatMax Saw with Blade Armor Coating | Home Ownership | |||
What's the difference between a cut-off blade and a cross cut blade? | Home Repair | |||
Bending/twisting wood (was Bending Oak) | Woodworking | |||
Bandsaw blade for 6061 Al alloy? What's a good blade size to buy? | Metalworking |