UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 1
Default Sensor Systems Oil Watchman Niveau

To replace the 4 batteries at a cost of £2.60 (set of 10 Duracell
Procell AAA from Amazon) instead of over £25.00 (for preassembled
copper tube) see http://www.youtube.com/watch?v=TLKq8cnJjeU&noredirect=1
- excellent. Excercise care when replacing the copper cap. Make sure
the spring is the right way round (pointed end to battery) and do NOT
hammer or tap the cap back on. Instead grease the outside of the tube
(where the cap will slide on) then "screw" the cap on with a pair of
pliers. As you do so gently shake the tube from time to time to listen
if the batteries are still loose. As soon as they are tight stop. Take
care not to overtighten and do not tap or hammer the cap on as you
could impact the tips of the positive ends of the batteries so they no
longer protrude (as I did) which will stop the circuit.
  #2   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 2,640
Default Sensor Systems Oil Watchman Niveau

Pipalong wrote:
To replace the 4 batteries at a cost of £2.60 (set of 10 Duracell
Procell AAA from Amazon) instead of over £25.00 (for preassembled
copper tube) see http://www.youtube.com/watch?v=TLKq8cnJjeU&noredirect=1
- excellent. Excercise care when replacing the copper cap. Make sure
the spring is the right way round (pointed end to battery) and do NOT
hammer or tap the cap back on. Instead grease the outside of the tube
(where the cap will slide on) then "screw" the cap on with a pair of
pliers. As you do so gently shake the tube from time to time to listen
if the batteries are still loose. As soon as they are tight stop. Take
care not to overtighten and do not tap or hammer the cap on as you
could impact the tips of the positive ends of the batteries so they no
longer protrude (as I did) which will stop the circuit.



Maybe you meant this one??

http://www.youtube.com/watch?v=uiq2M1_DEOo

Bob
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Watchman Alarm for oil tank - fitting query Matt[_11_] UK diy 2 January 28th 11 09:13 PM
Driveway sensor, model 917-1, mfg. around 1993 by "Detector Systems" klem kedidelhopper Electronics Repair 18 October 16th 10 04:32 AM
Sensor Systems Watchman battery pack Jezzer[_2_] UK diy 4 December 8th 09 09:47 PM
Niveau Watchman fuel oil tank volume gauge. willshak Home Repair 6 December 21st 07 02:14 PM
SONY Watchman FDL-3500 LCD video problem The Man Electronics Repair 2 May 6th 04 07:32 AM


All times are GMT +1. The time now is 08:17 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"