Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Cutting SS braid.
Bought a kit of parts to make up some custom brake hoses for the rear disc
brake conversion to my SD1. They are made by Goodridge. The inners are thick plastic pipe with a SS braid. The fittings compression types. I thought the inner would slide out so the outer and inner could be trimmed easily - but it appears not, unless I'm missing something. So how do I trim the outer about 1/2" back? Teasing it out and clipping each strand - as you might do with copper - is extremely time consuming. -- *I yell because I care Dave Plowman London SW To e-mail, change noise into sound. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cutting steel w/ a circular saw.... Cutting Aluminum Stock | Metalworking | |||
USB Cable with Aluminum Shield Braid | Electronics Repair | |||
desolder braid or suction pump | Electronics Repair | |||
Cutting aluminum with carbide wood cutting blade on tablesaw | Metalworking | |||
Cutting aluminum with carbide wood cutting blade on tablesaw | Woodworking |