From the instructions that come with the Ring 'Select a Light' system:
"All system connectors must be sited in an outdoor location". Elsewhere
it expands on this to say "Make sure to site all the system connectors
in an outdoor location (including the first one)".

This system is basically a mains to 12V AC transformer, 2-core figure-8
cable and 12V lights. The connectors referred to are choc-block in a
small splash-proof plastic box. One is used to connect each light as a
spur off the main cable run.

An example of the transformer is he

http://www.diy.com/diy/jsp/bq/nav.js...condid=9261597

A short (approx 1m) length of the 2-core cable is supplied hard wired
into the transformer. It's connected to the rest of the cable using one
of the choc-blocs.

So - why must this first connector be sited outdoors? Any ideas?

Dave

In message , Dave A
wrote

So - why must this first connector be sited outdoors? Any ideas?

Chinese instructions translated by someone in India who speaks no
English?



--
Alan
news2009 {at} admac {dot} myzen {dot} co {dot} uk

On 12/06/2011 18:30, Alan wrote:
In message , Dave A
wrote

So - why must this first connector be sited outdoors? Any ideas?

Chinese instructions translated by someone in India who speaks no English?



Does it have a trouble shooting section in case sum ting wong?

--
Dave - The Medway Handyman www.medwayhandyman.co.uk

On 12/06/2011 18:14, Owain wrote:
On Jun 12, 5:37 pm, Dave A wrote:
So - why must this first connector be sited outdoors? Any ideas?

Because the connectors catch fire?

Owain

That's the only thing I could think of.

Dave