Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
gas hob supply pipe size
For a typical 5 burner 700mm gas hob, is 15mm pipework for say 10
metres usually sufficient ? This gets me below the suspended ground floor where 22mm can easily be run if required (for another 8 metres perhaps). I know a gas fitter who will install this, but I need to consider the runs. Thanks, Simon. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
gas pipe size | Home Repair | |||
combi DHW supply/flow pipe size | UK diy | |||
Gas Experts Required - Is Supply Pipe Size OK? | UK diy | |||
LPG - Calculating minimum pipe size required to supply a gas fire | UK diy | |||
Can you put a water supply pipe and a gas supply pipe in the same conduit? | UK diy |