Hi All,

I am building a fairly big (about 2m long) brick charcoal barbecue in
my garden and have been searching for some good quality cooking grids
which will fit into a dishwasher. So far, the only ones I have found
have been from Denmark and I can't get them in the UK

Has anyone any ideas? I have thought about buying solid mesh and
cutting to size (thought it would be cheaper than getting bars and
have someone weld them) but any idea what the best metal would be?

thanks in advance

Lee.

Lee Nowell wrote:
Hi All,

I am building a fairly big (about 2m long) brick charcoal barbecue in
my garden and have been searching for some good quality cooking grids
which will fit into a dishwasher. So far, the only ones I have found
have been from Denmark and I can't get them in the UK

Has anyone any ideas? I have thought about buying solid mesh and
cutting to size (thought it would be cheaper than getting bars and
have someone weld them) but any idea what the best metal would be?

best is stainless if you want to wash, but why on earth would you?

I always light first and brush over with a wire brush.

The heat makes em sterile.

Then if its something odd like fish, or buregers we use a separate fish
carrier.


The way I did this years ago was to make a brick hearth, the use
expanded metal industrial flooring for both the charcoal carrier and ash
griddle, and for the primary cooking surfaces. Then if its anything a
bit sensitive use special carriers that you can buy in cooking shops for
the fish and burgers.

What you MUST have with charcoal is a way to regulate temperature down
though. The old colonial trick of pouring your beer on the coals is one
way, but consider a hood that comes down, and adjustable air vents.



thanks in advance

Lee.

On Sep 2, 3:56*pm, The Natural Philosopher
wrote:
Lee Nowell wrote:
Hi All,

I am building a fairly big (about 2m long) brick charcoal barbecue in
my garden and have been searching for some good quality cooking grids
which will fit into a dishwasher. *So far, the only ones I have found
have been from Denmark and I can't get them in the UK

Has anyone any ideas? *I have thought about buying solid mesh and
cutting to size (thought it would be cheaper than getting bars and
have someone weld them) but any idea what the best metal would be?

best is stainless if you want to wash, but why on earth would you?

I always light first and brush over with a wire brush.

The heat makes em sterile.

Then if its something odd like fish, or buregers we use a separate fish
carrier.

The way I did this years ago was to make a brick hearth, the use
expanded metal industrial flooring for both the charcoal carrier and ash
griddle, and for the primary cooking surfaces. Then if its anything a
bit sensitive use special carriers that you can buy in cooking shops for
the fish and burgers.

What you MUST have with charcoal is a way to regulate temperature down
though. The old colonial trick of pouring your beer on the coals is one
way, but consider a hood that comes down, and adjustable air vents.



thanks in advance

Lee.- Hide quoted text -

- Show quoted text -

Thanks for your reply...

The washing bit is more my wife than me.... I would be happy with the
brush method....

Plan is to have a brick sides/ chimney over to create the up draft and
cast the cooking "trough" out of fire proof cement (like Fondu or
something). I hadn't thought about putting vents in the "trough"
itself - is this necessary? Since the "trough" is rectangular, I have
been looking for a lid I can put over with a thermostat and preferably
a peep hole to see how things are going. No joy at all on that front :
(

Lee Nowell wrote:
On Sep 2, 3:56 pm, The Natural Philosopher
wrote:
Lee Nowell wrote:

best is stainless if you want to wash, but why on earth would you?

I always light first and brush over with a wire brush.

The heat makes em sterile.

The washing bit is more my wife than me.... I would be happy with the
brush method....

Top tip which I found out this summer - best way to clean the crud off
the grill is to quickly run over it with a lump of balled-up silver foil
before lighting.

David

On 2 Sep, 15:48, Lee Nowell wrote:

I am building a fairly big (about 2m long) brick charcoal barbecue in
my garden and have been searching for some good quality cooking grids
which will fit into a dishwasher. *

Buy stainless mesh and make your own. Stainless, not chrome plated.

I'd also strongly suggest making somee of it solid as a griddle,
rather than a grill. It's great for pancakes, fish, veggie burgers
(which otherwise tend to fall apart) and anything fried. Use 1/4" or
3/8" mild steel plate. De-rust each Summer with an angle grinder and
wire wheel, then re-season with oil.

On Sep 2, 4:22*pm, Andy Dingley wrote:
On 2 Sep, 15:48, Lee Nowell wrote:

I am building a fairly big (about 2m long) brick charcoal barbecue in
my garden and have been searching for some good quality cooking grids
which will fit into a dishwasher. *

Buy stainless mesh and make your own. Stainless, not chrome plated.

I'd also strongly suggest making somee of it solid as a griddle,
rather than a grill. It's great for pancakes, fish, veggie burgers
(which otherwise tend to fall apart) and anything fried. Use 1/4" or
3/8" mild steel plate. De-rust each Summer with an angle grinder and
wire wheel, then re-season with oil.

thanks for this. Any idea what guage stainless mesh would be best?
Would need to be fairly rigid I guess. Also, any thought on how to
make a handle for it?

Lee Nowell wrote:
On Sep 2, 4:22 pm, Andy Dingley wrote:
On 2 Sep, 15:48, Lee Nowell wrote:

I am building a fairly big (about 2m long) brick charcoal barbecue in
my garden and have been searching for some good quality cooking grids
which will fit into a dishwasher.
Buy stainless mesh and make your own. Stainless, not chrome plated.

I'd also strongly suggest making somee of it solid as a griddle,
rather than a grill. It's great for pancakes, fish, veggie burgers
(which otherwise tend to fall apart) and anything fried. Use 1/4" or
3/8" mild steel plate. De-rust each Summer with an angle grinder and
wire wheel, then re-season with oil.

thanks for this. Any idea what guage stainless mesh would be best?
Would need to be fairly rigid I guess. Also, any thought on how to
make a handle for it?

if you can get stainless mesh that's top banana about 3mm or 1/8" minimum.

On 2 Sep, 18:38, The Natural Philosopher wrote:

if you can get stainless mesh that's top banana about 3mm or 1/8" minimum.

"top banana"???

is that what you ask for? and get told "yes mate course it is..." as
he counts your twentys?

will old cooker shelves do the job for the OP?

Jim K