Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
High level lifting revisited
On Tue, 20 Jul 2010 12:25:58 +0100, Roger Mills wrote:
Only *just* behind that point, it might be a little "unpredictable" and if it did tip it would keep going, as it would become more and more unblanced as it tipped. As long as the long leg can't move backwards - i.e. it's tied to the other two legs at ground level, it couldn't tip forwards very far because the 'load' would come into contact with the wall. Or window... and keep going... [Takes me back a bit. When I did A-level Applied Maths, I used to analyse hundreds of similar structures - resolving all the forces and moments - but that was 50 years ago, and I'm a bit rusty!] Ah the only bit of Pure Maths I could understand were those bits that I needed to do the Applied Maths... -- Cheers Dave. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
High level lifting | UK diy | |||
Lifting the rear of a pickup truck to level it out/Van Spare carrier | Metalworking | |||
Frustration level: high | Woodworking | |||
high level cistern | UK diy |